• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.31-47
• /
• 2019

This study analyzes the emotional labor experiences of 8 social workers in social welfare facilities and public institutions by thematic analysis method with interveiws with them. Six categories and Twenty two themes concerning the emotional labor experience were derived from the analysis. Six categories are as follows: 'work life as a target for anger', 'unsafe workplace', 'emotional labor that ruins life', 'overcoming hurt emotion', and 'living with emotional labor'. Social workers are constantly required to perform emotional labor providing services to clients in the field of practice, and they also suffer verbal abuse from clients. Social workers feel the pressure of work in the environment that does not tolerate mistakes and they must keep their safety on their own. In these cases, emotional labor has effects on the physical and mental health of workers. The problem of emotional labor is difficult to solve and there might not be no choice but to endure. This study suggests practical and policy measures for social workers based on the results of the analysis. Policy suggestions are as follows: safety assurance for social workers, establishment of base facilities for employee support, human rights education for employees, preparation of super vision system, and the provision of a mental health care system.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.596-608
• /
• 2018

As urban infrastructure is aging, the possibility of accidents due to the failures or breakdowns of infrastructure increases. Especially, aging underground infrastructures like sewer pipes, waterworks, and subway have a potential to cause an urban ground sink. Urban ground sink is defined just as a local and erratic collapse occurred by underground cavity due to soil erosion or soil loss, which is separated from a sinkhole in soluble bedrock such as limestone. The conventional measurements such as differential settlement gauge, inclinometer or earth pressure gauge have a shortcoming just to provide point measurements with short coverage. Therefore, these methods are not adequate for monitoring of an erratic subsidence caused by underground cavity due to soil erosion or soil loss which occurring at unspecified time and location. Therefore, an alternative technology is required to detect a change of underground physical condition in real time. In this study, the feasibility of a novel magnetic resonance based monitoring method is investigated through laboratory tests, where the changes of path loss (S21) were measured under various testing conditions: media including air, water, and soil, resonant frequency, impedance, and distances between transmitter (TX) and receiver (RX). Theoretically, the transfer characteristic of magnetic field is known to be independent of the density of the medium. However, the results of the test showed the meaningful differences in the path loss (S21) under the different conditions of medium. And it is found that the reflection coefficient showed the more distinct differences over the testing conditions than the path loss. In particular, input reflection coefficient (S11) is more distinguishable than output reflection coefficient (S22).

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.713-718
• /
• 2018

In many previous studies, monte carlo simulation is used to produce lead-free shielding sheet, and the possibility of radiation shielding capability and weight reduction is presented. But it is difficult to simulation for binder and micro-pores because of In fact it does not provide sufficient information necessary for the commercialization process. Therefore, in this paper, the results of radiation shielding capability corresponding to filling factor was presented by using the screen printing method to provide information on gel-paste required for the commercialization process. In this study, the geometric setup for evaluate of radiation shielding ability was designed to comply with IEC 61331-1:2014 and KS A 4025. In addition, radiation irradiation conditions were 100 kVp filtered with 2.0 mmAl total filtration was applied according to KS A 4021 standard. In this study, Pb $1270{\mu}m$, $BaSO_4$ $3035{\mu}m$, $Bi_2O_3$ $1849{\mu}m$ and $WO_3$ $2631{\mu}m$ were analyzed based on ten value layer. Additionally, the filling factor was analyzed as $BaSO_4$ 38.6%, $Bi_2O_3$ 27.1%, $WO_3$ 30.15%. However, in the case of applying low-temperature high-pressure molding in the future, it is expected that the radiation shielding capability can be sufficiently improved by reducing the porosity while increasing the filling factor.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.17-21
• /
• 2019

In this study, selective laser sintered 3D printing mold core and metal core were used to investigate the difference of the thickness shrinkage from the gate of the injection molded part at a constant interval. SLS 3D printing mold core was made of nylon-based PA2200 powder and the metal core was manufactured by conventional machining method. As the PA2200 powder material has low strength, thermal conductivity and high specific heat characteristics compared with metal, molding conditions were set with the consideration of molten temperature and injection pressure. Crystalline resin(PP) and amorphous resin(PS) with low melting temperature and viscosity were selected for the injection molding experiment. Cooling time for processing condition was selected by checking the temperature change of the cores with a cavity temperature sensor. The cooling time of the 3D printing core was required a longer time than that of the metal core. The thickness shrinkage of the molded part compared to the core depth was measured from the gate by a constant interval. It was shown that the thickness shrinkage of the 3D printing core was 2.02 ~ 4.34% larger than that of metal core. In additions, in the case of metal core, thickness shrinkage was increased with distance from the gate, on the contrary, in the case of polymer core showed reversed aspect.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.221-221
• /
• 2015

Sustainable use of water resource and conservation of water quality are essential problems in the world. Especially, problems of water quality are serious one for human health as well as ecological system of all creatures on the earth. Recently, the importance of total effluent load as well as the concentrations of pollutant materials has been recognized not only for the conservation of water quality but also for sustainable water use in watersheds. However, the measurement or estimation of total effluent load from non-point source area such as farm lands or forests may be more difficult because both of concentration and discharge of the water are greatly changed depending on various factors especially metrological conditions such as rainfall, while the measurement from a point source area may be easy because the concentration of pollutant materials and amount of discharge water are relatively steady. Therefore, the total effluent load from a non-point source is often estimated by statistical relationships between concentration and discharge, which is called as L-Q equation. However, a lot of work and time are required to collect and analyze water samples and to get the accurate relationship or regressive equation. So, we proposed a new system for direct measurement of total effluent load of water quality from non-point source areas to solve the problem. In this system, the overflow depth at a hydraulic weir is measured with a pressure gage every hourly interval to calculate the amount of hourly discharge at first. Then, the operating time of a small electric pump to collect an amount of water which is proportional to the discharge is calculated to intake the water into a storage tank. The stored water is taken out a few days later in a case of storm event or several weeks later in a case of non-rainfall event and the concentrations of water quality such as total nitrogen and phosphorous are analyzed in a laboratory. Finally, total load of the water quality can be calculated by multiplying the concentration by the total volume of discharge. The system was installed in a small experimental forestry watershed to check the performance and know the total load of water quality from the forest. It was found that the system to collect a proportional amount of water to actual discharge operated perfectly and a total load of water quality was analyzed accurately. As the result, it was expected that the system will be very available to know the total load from a non-point source area.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.46-53
• /
• 2019

Recently, the need for emergency medical facilities is increasing due to a large-scale disaster. The Ministry of the Interior and Safety has completed the development of Disaster Resource Sharing System (DRSS). In this system, only air tent and negative pressure tent, which are classified and managed as equipment are resources related to emergency medical facility at disaster site. However, the characteristics of resources for the facility such as the time of input, a period of stay, transportation, and installation methods were not reflected. So, The purpose of this study is to propose improvements of management of resources for emergency medical facility at disaster site, that classified to materials and equipment in DRSS. This study analyzed the state of resources for facilities and the attributes of resources based on literature and disaster medical consultation of mobile hospitals. The resources for emergency medical facility are required to be linked to medical support resources and reflected in the DRSS, since emergency medical facility resources at the disaster site should be managed through a combination of medical resources classified as equipment. And future research on installation of emergency medical facilities plan considering the cost of the disaster management resources should be carried out.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.321-331
• /
• 2021

This study sought to analyze factors influencing high-risk drinking in single-person households. For this, data from the 2018 community health survey were used. Subjects were 32,389 adults above the age of 19 in single-person households. For the data analysis, high-risk drinking groups were extracted according to the high-risk drinking rate index of the survey to arrive at influencing factors and differences in health-related and sociodemographic characteristics. The IBM SPSS 25.0 software was used for analysis and a complex sampling design was applied. The results showed that the high-risk drinking rate of Korea's single-person households was 15.0% (male: 25.8%, female: 5.8%) and age, education under high school level, service-industry employees, smokers, people with depression, high blood pressure, and irregular breakfast eaters appeared as common elements for both genders. Stress appeared to only affect males while being diabetic only affected females. High-risk drinking was higher for males in their 30~40s and women in their 20~30s. The younger generation showed the highest numbers in high-risk drinking and factors like stress or depression appeared to be influencing factors for high-risk drinking. Hence, mental health programs along with customized health policies through health forms and lifestyle changes will be required to lower the high-risk drinking rates of single-person households.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.37-44
• /
• 2011

The critical micelle concentration (CMC) of sorbitan laurate SP 20 surfactant in this paper was near $7.216{\times}10^{-4}mol/L$ and the surface tension at CMC was about 26.0 mN/m, which showed higher CMC and lower surface tension than those of octylphenol ethoxylate octylphenol ethoxylate (OPE) 10 surfactant. Dynamic surface tension measurement using a maximum bubble pressure tensiometer showed that the adsorption rate at the interface between air and surfactant solution was found to be slower with SP 20 surfactant, presumably due to a low mobility of SP 20 surfactant monomer. The contact angle of SP 20 surfactant solution was observed to decrease with an increase in surfactant concentration and showed a larger value than that of OPE 10 surfactant solution. Half-life time for foams generated with 1 wt% surfactant solution was also larger with SP 20 surfactant, which indicated higher foam stability with SP 20 surfactant. Dynamic behavior study reveals that the solubilization of n-decane oil was much lower with SP 20, which is in good agreement with experimental results of foam stability, contact angle and CMC. Dynamic interfacial tension measurement by a spinning drop tensiometer shows that interfacial tensions at equilibrium condition in both systems were almost the same but the time required to reach equilibrium was longer with SP 20.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.18 no.2
• /
• pp.110-115
• /
• 2020

Purpose: Acute kidney injury (AKI) in patients with glyphosate poisoning has a poor prognosis. This study aimed to predict the risk factors for AKI in patients with glyphosate poisoning at the emergency department (ED). Methods: Clinical data on glyphosate poisoning patients at ED who were older than 18 years were collected retrospectively between January 2013 and December 2019. The clinical characteristics and clinical outcomes of the AKI group in patients with glyphosate poisoning were compared with the non-AKI (NAKI) group. Results: Of 63 glyphosate poisoning patients, AKI was observed in 15 (23.8%). The AKI patients group showed the following: old age (p=0.038), low systolic blood pressure (p=0.021), large amount of ingestion (p=0.026), delayed hospital visits (p=0.009), high white blood cells (WBC) (p<0.001), high neutrophil counts (p<0.001), high neutrophil-lymphocyte (LN) ratios (p<0.001), high serum potassium (p=0.005), low arterial blood pH (p=0.015), and low pO2 (p=0.021), low bicarbonate (p=0.009), and high Poisoning Severity Score (PSS) (p<0.001). AKI patients required hemodialysis, ventilator care (p<0.001, p=0.002), and inotropics (p<0.001). They also showed more intensive care unit admission (p<0.001), longer hospitalization (p<0.001), and high mortality (p<0.001). Logistic multivariate regression analysis showed that high WBCs (OR, 1.223) and increased LN ratios (OR, 1.414) were independently associated with the occurrence of AKI. Conclusion: In patients with glyphosate poisoning at ED, high WBCs and increased LN ratios can help predict the occurrence of AKI.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.1
• /
• pp.1-14
• /
• 2021

The Ministry of Environment of Korea has been releasing Asiatic black bears since 2004 at Jirisan National Park. It exceeded the target number of Asiatic black bears in 2018. As of July 2020, in addition to 67 traceable bears, many Asiatic black bears are dispersed outside Jirisan National Park. Jirisan National Park is a very dense place with more than 3 million visitors every year. In this study, the roads and trails through Jirisan National Park were considered to be the main dispersion factors of Asiatic black bears, and the fragmentation analysis was conducted. As of July 2017, the length of roads and trails in Jirisan National Park was 363.4km. Based on this, Jirisan National Park was fragmented into 163 patches. There is only one place that maintains a single area of more than 50㎢ that is suitable for large mammals to inhabit, and 141 places are less than 5㎢. There are 6 patches of 24 to 200㎢ area suitable for living of large mammals including Asiatic black bears, in Jirisan National Park. Compared to the announcement made by the Korea National Park Service in 2014, activities of Asiatic black bears were rare in areas below 5㎢ area and the frequency of activities was high in more than 20㎢ area. This shows that human activities in protected areas such as national parks can directly affect the activities of wild animals, including Asiatic black bears. Therefore, efforts should be made to improve the habitat of Asiatic black bears by reducing the pressure of visiting for Jirisan National Park. In addition, as a result of analyzing the fragmentation of the park's natural conservation zone 107.7km, 45% of the trail of Jirisan National Park, was opened, which is more fragmentation than other use zones. The park nature conservation zone accounts for about 32% of the total area of Jirisan National Park, but the average patch area is only 2.93㎢ and seven large shelters are located. Therefore the Asiatic black bears are negatively affected. This is the result of inconsistent national park use zone setting and actual park management. In overseas countries, research is active on the negative effects of human activity on ecosystems in protected areas. However, there is a lack of research of that in Korea. Thus, that research is required for protection area management in the future.