• Journal of Gastric Cancer
• /
• v.7 no.3
• /
• pp.152-159
• /
• 2007

Purpose: Recently, the use of laparoscopic assisted gastrectomy for early gastric cancer has been on the increase and the procedure has been quickly adopted by clincians. However, there are few reports regarding the safety and risk of this type of surgery. The aim of this study is to evaluate the morbidity and to verify the safety of laparoscopic assisted gastrectomy for early gastric cancer. Materials and Methods: A total of 376 patients that had undergone laparoscopic assisted gastrectomy for early gastric cancer between April 2004 and December 2006 were reviewed retrospectively. The clinicopathological characteristics, operative complications, and factors related to complications were evaluated. Results: The overall operative morbidity and mortality rates were 10.6% and 0%, intraoperative morbidity was 1.1% (4 of 376 patients) and post operative morbidity was 9.6% (36 of 376 patients). Most complications required no surgery except for an intestinal obstruction in two cases. Multivariate analysis of risk factors related to operative morbidity determined that age was an independent factor associated with morbidity (P=0.021). Conclusion: The complication rate of laparoscopic assisted gastrectomy is low and most complications can be managed by conservative methods rather than with surgery. There were no specific predicting factors for complications except old age. Laparoscopy is a technically feasible and acceptable surgical modality for early gastric cancer.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.120-128
• /
• 2018

The purpose of this study is to establish basic data for the continuous protection management policy of domestic natural world heritage and mixed world heritage, and to examine the present situation and characteristics of the protection management according to the World Heritage Convention on the World Heritage listed Huangshan. The results of this study are as follows. First, Huangshan began to be protected by the establishment of the Huangshan Construction Committee in 1933, and after the designation of national park in 1982, laws and regulations were established in the central ministries, And various projects related to utilization have been implemented. Secondly, the establishment of the boundary for protection was actively intervened by the central government, such as the reorganization of the boundary of Huangshan through the administrative district plan. In order to protect the ecological and landscape value as well as the cultural factor, And designated a heritage designated area. Third, the protection management of Huangshan was divided into four major stages. The first phase was divided into the period when administrative measures were taken to manage the protection of Huangshan. The second phase was designated as a national park in Huangshan. The third period was the time of the protection-oriented project according to the recommendation of the international organizations after the World Heritage listed. The fourth period was the expansion of the tourism industry for the continuous use of protection of Huangshan city, My preservation business was being implemented. Fourth, Huangshan is managed by the central government and the city government. Huangshan, which is a mixed heritage, is managed jointly by the Ministry of Cultural Heritage Administration and the Ministry of Natural Heritage Administration. The protection and management of Huangshan promoted the efficiency and expertise of the heritage-related work through the establishment of the administrative unit-specific management system, and the local governments were entrusted with the authority to implement the protection management policies that meet local characteristics. Fifth, the preservation area of Huangshan has been destroyed by the development policy centered on the mountain. In addition, according to the operation of accommodation facilities, there are problems such as sewage, garbage disposal, and environmental pollution caused by tourists, and the damage caused by pests and diseases in planted plantations around the area and changes in ecosystem due to the composition of cable cars. Sixth, for the continuous protection of Huangshan, strict regulations on new construction, extension and management of accommodation are required, and it is necessary to install facilities to limit and control the number of visitors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7978-7989
• /
• 2015

Dyslipidemia is a major risk factor for cardio-cerebrovascular disease. Although the prevalence among Korean adults is very high, its management is known to be poor. The aim of this study was to access the prevalence, awareness, treatment, and control rates of dyslipidemia according to treatment guideline rather than diagnostic criteria. The risk factors for cardio-cerebrovascular disease were evaluated to apply the appropriate risk-based threshold of the lipid treatment targets according to risk category. Analysis was done using nationally representative data (n = 16,263) collected from adults aged 20 years and older participating the Korea National Health and Nutrition Examination Survey (KNHANS) 2010-2012. The age-standardized prevalence rate of dyslipidemia according to treatment criteria was 34.1%. Of these prevalent cases, however, only 19.2% were aware; 9.5% treated; and 8.7% controlled. The age-standardized control rate among treated persons was 47.5%. Men had a significantly higher prevalence than women (39.7% vs. 28.8%), but a significantly lower rate of awareness, treatment, and control (16.0% vs. 22.3%, 7.7% vs. 11.3%, and 6.1% vs. 11.2%, respectively). As the higher risk category, the prevalence rate was higher but the control rate was lower. The prevalence of patients with diabetes was 82.5% when applying the treatment criteria (LDL-cholesterol level of ${\geq}100mg/dL$ and triglyceride level of ${\geq}200mg/dL$). However, only 11.9 % of these were controlled, whose LDL-cholesterol and triglycerides were lower than the treatment goals. Our findings suggest that effective strategies are required to decrease the gap between the prevalence of dyslipidemia and the following treatment. It would be worthwhile to strengthen the follow-up management of patients with dyslipidemia in the National Health Screening Program, especially in the high risk group of cardio-cerebrovascular disease.

• Childhood Kidney Diseases
• /
• v.9 no.1
• /
• pp.46-55
• /
• 2005

Purpose : Recurrent urinary tract Infection(UTI) in primary vesicoureteral reflux(VUR) may lead to serious renal scarring, a major cause of childhood hypertension and end-stage renal disease. To prevent recurrent UTI, low-dose long--term antibiotic prophylaxis has been recommended. However, recurrent UTI still develops during antibiotic prophylaxis, the efficacy of which is now being disputed. The emergence of resistant bacteria has also raised concerns. To evaluate the effect of antibiotic prophylaxis, we investigated recurrent UTI during prophylactic antibiotic use in children with primary VUR Materials : The incidence and risk factors of recurrent UTI were retrospectively evaluated in ninety-one children with primary VUR on trimethoprim- sulfamethoxazole(TMP/SMX) prophylafis during the year following their index febri]e UTI. Results : Recurrent UTI occurred in 31.9%(29/91) children and comprised 0.32 episodes/patient year. Febrile UTI was 0.26 episode/patient year and afebrile UTI was 0.07 episodes/patient year. The recurrent rate of UTI in male patients with phimosis was 37.2%(19/51), which was significantly higher than in males without phimosis 0%(0/5)(P=0.025). In the logistic regression analysis for recurrent UTI, renal scar was the significant risk factor for recurrent UTI [RR 3.8(95% CI 1.0-14.1) P=0.04]. For other well-known risk factors such as sex, age, degree of VUR, APN, and voiding dysfunction, the differences were not significant. Conclusion : TMP/SMX prophylaxis did not prevent recurrent UTI in children with primary VUR. Phimosis and renal scars were the risk factors for recurrent UTI but the grade of primary VUR was not. In VUR without phlmosis and renal scar, a randomized controlled study without antibiotic prophylaxis is required. (J Korean Soc Pediatr Nephrol 2005;9:46-55)

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.47-75
• /
• 2009

Recently, researches on Management Information Systems (MIS) have laid out theoretical foundation and academic paradigms by introducing diverse theories, themes, and methodologies. Especially, academic paradigms of MIS encourage a user-friendly approach by developing the technologies from the users' perspectives, which reflects the existence of strong causal relationships between information systems and user's behavior. As in other areas in social science the use of structural equation modeling (SEM) has rapidly increased in recent years especially in the MIS area. The SEM technique is important because it provides powerful ways to address key IS research problems. It also has a unique ability to simultaneously examine a series of casual relationships while analyzing multiple independent and dependent variables all at the same time. In spite of providing many benefits to the MIS researchers, there are some potential pitfalls with the analytical technique. The research objective of this study is to provide some guidelines for an appropriate use of SEM based on the assessment of current practice of using SEM in the MIS research. This study focuses on several statistical issues related to the use of SEM in the MIS research. Selected articles are assessed in three parts through the meta analysis. The first part is related to the initial specification of theoretical model of interest. The second is about data screening prior to model estimation and testing. And the last part concerns estimation and testing of theoretical models based on empirical data. This study reviewed the use of SEM in 164 empirical research articles published in four major MIS journals in Korea (APJIS, ISR, JIS and JITAM) from 1991 to 2007. APJIS, ISR, JIS and JITAM accounted for 73, 17, 58, and 16 of the total number of applications, respectively. The number of published applications has been increased over time. LISREL was the most frequently used SEM software among MIS researchers (97 studies (59.15%)), followed by AMOS (45 studies (27.44%)). In the first part, regarding issues related to the initial specification of theoretical model of interest, all of the studies have used cross-sectional data. The studies that use cross-sectional data may be able to better explain their structural model as a set of relationships. Most of SEM studies, meanwhile, have employed. confirmatory-type analysis (146 articles (89%)). For the model specification issue about model formulation, 159 (96.9%) of the studies were the full structural equation model. For only 5 researches, SEM was used for the measurement model with a set of observed variables. The average sample size for all models was 365.41, with some models retaining a sample as small as 50 and as large as 500. The second part of the issue is related to data screening prior to model estimation and testing. Data screening is important for researchers particularly in defining how they deal with missing values. Overall, discussion of data screening was reported in 118 (71.95%) of the studies while there was no study discussing evidence of multivariate normality for the models. On the third part, issues related to the estimation and testing of theoretical models on empirical data, assessing model fit is one of most important issues because it provides adequate statistical power for research models. There were multiple fit indices used in the SEM applications. The test was reported in the most of studies (146 (89%)), whereas normed-test was reported less frequently (65 studies (39.64%)). It is important that normed- of 3 or lower is required for adequate model fit. The most popular model fit indices were GFI (109 (66.46%)), AGFI (84 (51.22%)), NFI (44 (47.56%)), RMR (42 (25.61%)), CFI (59 (35.98%)), RMSEA (62 (37.80)), and NNFI (48 (29.27%)). Regarding the test of construct validity, convergent validity has been examined in 109 studies (66.46%) and discriminant validity in 98 (59.76%). 81 studies (49.39%) have reported the average variance extracted (AVE). However, there was little discussion of direct (47 (28.66%)), indirect, and total effect in the SEM models. Based on these findings, we suggest general guidelines for the use of SEM and propose some recommendations on concerning issues of latent variables models, raw data, sample size, data screening, reporting parameter estimated, model fit statistics, multivariate normality, confirmatory factor analysis, reliabilities and the decomposition of effects.

• Journal of Distribution Science
• /
• v.10 no.6
• /
• pp.39-53
• /
• 2012

It is widely known that knowledge management plays a facilitating role that contributes to upgrading organizational performance. Knowledge management systems (KMS), especially, support the knowledge management process including the sharing, creating, and using of knowledge within a company, and maximize the value of knowledge resources within an organization. Despite this widely held belief, there are few studies that describe how companies actually develop, share, and practice their knowledge. Companies in the domestic small franchise sector, which are in the early stages in terms of knowledge management, need to improve their KMS to manage their franchisees effectively. From this perspective, this study uses a qualitative approach to explore the actual process of knowledge management implementation. This article presents a case study of PB (Paris Baguette) company, which is the first to build a KMS in the franchise industry. The study was able to confirm the following facts through the analysis of target companies. First, the chief executive's support is a critical success factor and this support can increase the participation of organization members. Second, it is important to build a process and culture that actively creates and leverages information in knowledge management activities. The organizational learning culture should be one where the creation, learning, and sharing of new knowledge is developed continuously. Third, a horizontal network organization is needed in order to make relationships within the organization more close-knit. Fourth, in order to connect the diverse processes such as knowledge acquisition, storage, and utilization of knowledge management activities, information technology (IT) capabilities are essential. Indeed, IT can be a powerful tool for improving the quality of work and maximizing the spread and use of knowledge. However, during the construction of an intranet based KMS, research is required to ensure that the most efficient system is implemented. Finally, proper evaluation and compensation are important success factors. In order to develop knowledge workers, an appropriate program of promotion and compensation should be established. Also, building members' confidence in the benefits of knowledge management should be an ongoing activity. The company developed its original KMS to achieve a flexible and proactive organization, and a new KMS to improve organizational and personal capabilities. The PB case shows that there are differences between participants perceptions and actual performance in managing knowledge; that knowledge management is not a matter of formality but a paradigm that assures the sharing of knowledge; and that IT boosts communication skills, thus creating a mutual relationship to enhance the flow of knowledge and information between people. Knowledge management for building organizational capabilities can be successful when considering its focus and ways to increase its acceptance. This study suggests guidelines for major factors that corporate executives of domestic franchises should consider to improve knowledge management and the higher operating activities that can be used.

• Korean Security Journal
• /
• no.57
• /
• pp.57-84
• /
• 2018

This study assumes that the perception of the ex-prisoner's against stigma will affect trust in interpersonal relationship. Prior studies have suggested that there is a stigma at the base of the awareness where people avoid and discriminate against ex-prisoner's. This in turn affects ex-prisoner's' recividicism, but there is no study about ex-prisoner's perception of stigma in Korea. Although stigma can be explained in numerous ways, this study is based on the opinion of Phillips(2016), which divides the subscale of stigma as perceived public stigma, perceived personnel stigma, and self stigma. He insisted that ex-prisoner's believe perceived public stigma higher than self-stigma. these results are consistent with this study. However, it is important to note that although ex-prisoner's are more aware of public stigma than self-stigma, they are actually more influenced by self stigma in pereonal relationships. This means that ex-prisoner's are more susceptible to internal psychological awareness than external social recognition. Therefore, the development and intervention of the program to overcome the internal self-stigma of the released prisoner is required. In this study, first, stigma, especially self-stigma turned out to have influence on the interpersonal trust. Therefore, as self-stigma level increased, the interpersonal trust decreased in most cases. Second, it was shown that stigma has the greatest influence on children out of family members, co-workers out of social relationship, self trust out of general relationship in. This confirms that stigma is a factor that greatly influences relationship between important people for ex-prisoner's. Third, since self-sigma negatively reestablish self-identity, make individuals recognize themselves as deviators and show bad lifestyle, which lead them to become habitual offender, ex-prisoner's need to make efforts to overcome self-stigma, and development and intervention of program that can make ex-prisoner's have positive self identity is requested. Fourth, although participants in the study were only male, it seems that there is difference in recognition of stigma by gender, and influence of stigma not only on interpersonal relationships, but also on social reintegration and recidivism imply that these might be good future research topics.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.5
• /
• pp.25-42
• /
• 2019

The purpose of this study is to analyze the effect of internal competence of small business on the competitive advantage and start-up intention. Through this, which key competence of small business can be proposed for market growth against of large companies that have a great capital power. Also, implications for development direction can be suggested. For this purpose, technology capability, financing capability, marketing capability, and product/service differentiation capability factors were set as independent variables, as well as competitive advantage as a mediating factor, and startup intention to be franchiser as a dependent variable. For the analysis, a structured questionnaires survey was conducted to 276 domestic small business in capital area. The main results are as follows. First, in relation to the internal competency and the competitive advantage of small businesses, it was found that technological capabilities, financing capabilities and product (service) differentiation have a positive effect on competitive advantage. Second, the relationship between the internal capacity of a small entity and startup intention to commercialize a franchiser business indicates that its financing capacity and marketing capabilities have a positive effect on startup intention to commercialize the business, and that competitive advantage has a significant effect on startup intention to commercialize the franchise. Third, competitive advantage was found to mediate the relationship between internal competency and startup intention. Finally, it was shown that the internal capacity of a small business has a regulating effect in relation to its financing capacity, marketing capabilities and startup intention to commercialize the franchise, and that it also had a regulating effect in relation to its relationship with its competitive advantage and franchise suitability. Based on the above results, if small business can take competitive advantage in the market, they also consider startup intention to commercialize a franchiser, in addition, it is expected that one suggestion can be made from an internal capacity perspective required more emphasis on operations and management as an alternative to expanding small businesses' business, including market access measures that can be linked to internal capacity factors of small businesses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.