• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.438-440
• /
• 2005

At present, characteristic of high color reproduction for LCD TV is needed in Display market according to start mass production of LCD TV. Therefore development target for LCD is focused on improvement of color reproduction. The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But decrease of luminance and panel transmittance is caused by alteration of Color Filter. Accordingly, we completed LCD with high color reproduction by the most suitable emission spectrum of CCFL phosphor at panel with conventional color filter. In this experiment, we knew that LCD applied to CCFL with high color rendering characteristic had color reproduction range of 81% compared with NTSC in CIE color coordinate. According to increase of intensity peak and alteration of Red, Green, Blue phosphor spectrum, we made LCD with high color reproduction characteristic. In conclusion we achieved improvement of color reproduction ratio by alteration of CCFL phosphor without changing color filter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.414-415
• /
• 2006

At present, Characteristic of high color reproduction for LCD products needed in Display market. Therefore, The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But High color reproduction phosphor is short life time as compared with conventional phosphor. In this experiment, by using split the Red, Green, Blue CCFL with high color reproduction phosphor instead of conventional high color reproduction CCFL. We knew that the high color reproduction RGB split CCFL BLU has same spectrum data and chromaticity, but has long life time as manufacturing RGB split CCFL and reduce chromaticity shift following long time discharge as compared with conventional high color reproduction CCFL.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.5195-5200
• /
• 2014

최근 백색 LED는 각종 조명등의 응용 시스템에 크게 사용되고 있다. 백색 LED 칩을 만들기 위하여 실리콘과 형광체를 배합하여 청색 LED 칩 위에 도포하는 공정이 필요한데, 이때 배합의 오류, 실리콘의 상온 노출 시간의 경과, 청색 칩 특성의 변화 등의 원인으로 버려지는 형광체가 있어 이것이 원가 절감에 악영향을 미치고 있다. 본 연구에서는 버려지는 형광체의 재생공정을 통하여 제조된 LED와 정상형광체의 LED의 특성을 비교하고, 이들을 이용하여 실 응용 제품인 LED 손전등에 적용하여 그 특성의 동일함을 얻었다. 재생과 정상 형광체의 특성에서 광량 저하량 3.2[Cd]와 3.6[Cd], 색감 저하량 57[K]와 58[K]를 보였고, LED의 실제 응용제품에 적용한 결과 최대 백색파장 444.3[nm]와 449.8[nm]를 나타내어 재생형광체의 LED가 정상의 것과 동일한 특성을 보여 원가절감에 큰 기여를 할 것으로 나타났다.

• 한국환경과학회지
• /
• 제14권8호
• /
• pp.801-810
• /
• 2005

The phosphor and ITO(Indium Tin Oxide) films for video phone tube (VPT) were simply prepared by the screen printing and thermal transfer methods. The increasing order of thermal firing of acrylic binder for phosphor and ITO was M6003 < M6664 < A/A 1919 < M500l < M670 1 and all mass of binders were perfectly decomposed at lower temperature than $400^{\circ}C.$ After thermal firing of phosphor paste, the residual of binder on the surface of phosphor could not be found by SEM. Aerosil as thickner provides the thixotropy property for phosphor paste but decrease the brightness of phosphor screen as residual after thermal firing. Since the thixotropy of M5001 binder without aerosil was shown and the storage modulus of phosphor paste by increasing the angular frequency was not nearly changed and the decrease of the storage modulus of phosphor paste by increasing the strain was remarkably shown. It was possible to prepare the phosphor paste which was predominant in the plate separation and the reproduction of pattern after the screen printing. Since the addition of dispersing agent to improve the printing process decreases the electrical conductivity and light transmission of ITa film, it could be found to be necessary the development of binder for phosphor paste that decreases the amount of dispersing agent possibly and does not use the aerosil as additive.

• 세라미스트
• /
• 제21권1호
• /
• pp.55-63
• /
• 2018

Recently, display technology has been focused in regard with with color reproduction, contrast ratio, image resolution and color bit. Among these technologies, the color reproducibliity of White, Red, Green, and Blue is associated with the TV plaform and is expressed as a major technology. Major TV platforms are divided into three categories since 2015, including LCD-based phosphor coverted LED BLU technology, QD sheet technology using nano-sized quantum dots, and OLED technology. In this paper, we describe the color reproducibility definition and background, luminescent materials with wide color gamut, color reproducibility of TV display performance, and discuss about next luminescent materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.75-76
• /
• 2000

Tone reproduction characteristics of color and gray have a great influence on the picture quality in visual display. In this study, we optimized tone reproduction characteristics of color and gray of CRT monitor by setting brightness to the optimum level, in which offsets for RGB channels can be assumed to zero. The optimum brightness level could be found by measuring a few tones of neutral for the combination of 2 levels of brightness and 2 levels of contrast. As the result, the relationship between normalized DAC count and normalized luminance of primary color or gray has been simply presented by gamma and result in good phosphor constancy.

• 한국발생생물학회지:발생과생식
• /
• 제25권1호
• /
• pp.67-72
• /
• 2021

This study investigated the IGF-1 signal in specific tissues using Pacific oysters artificially matured via water temperature elevation. Pacific oysters were subjected to water temperature elevation from March to June, and 20 were randomly sampled each month. The condition index (CI) and tissue weight rate (TWR) were examined by measuring shell length, shell height, shell width, and soft tissue weight. The IGF-1 signal in tissues (adductor muscle, digestive glands, gills, labial palps, mantle edges, and gonads) was analyzed by sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Western blotting. From April to June, the TWR of females and males increased from 19.1±2.9 to 21.0±3.6 and 18.2±2.0 to 19.2±2.5, respectively, while the CI remained the same. The IGF-1 signal in each tissue differed. IGF-1 was expressed in the adductor muscle, while tyrosine was expressed in all tissues. The phosphor (p)-ERK and p-AKT activities were high in the adductor muscle, mantle edge, and gonads. IGF-1 signaling affected the growth and maturity of the Pacific oysters examined.