• Development and Reproduction
• /
• v.20 no.2
• /
• pp.119-125
• /
• 2016

This study describes results on sexual maturation and characteristics of natural spawned eggs to develop a method for the production of stable, healthy fertilized eggs from captive-reared yellowtail kingfish, Seriola lalandi. A total of 59 yellowtail kingfish were captured off the coast of Jeju Island, after which the broodstock was cultured in indoor culture tank ($100m^3$) until they were 6.1-14.9 kg in body weight. As part of the rearing management for induced sex maturation, the intensity of illumination was maintained at 130 lux. The photoperiod (light/dark; L/D) was set to a 12 L/12 D from October 2013 to January 2014, and 15 L/9 D from February 2014 to June 2014. Feeds comprised mainly EP (Extruded Pellets), with squid cuttlefish added for improvement of egg quality, and was given from April to June 2014. The first spawning of yellowtail kingfish occurred in May 3, 2014, at a water temperature of $17.0^{\circ}C$. Spawning continued until June 12, 2014, with the water temperature set at $20.5^{\circ}C$. Time of spawning was 26 times at this period. The total number of eggs that spawned during the spawning period was $4,449{\times}10^3$. The buoyant rate of spawning eggs and fertilization rate of buoyant eggs during the spawned period were 76.1% and 100%, respectively. The diameters of the egg and oil globule were $1.388{\pm}0.041mm$ and $0.378{\pm}0.029mm$, respectively, which was higher in early eggs than in those from late during the spawned period.

• Development and Reproduction
• /
• v.21 no.2
• /
• pp.157-165
• /
• 2017

One of the reasons to causing blood coagulation in the tissue of xenografted organs was known to incompatibility of the blood coagulation and anti-coagulation regulatory system between TG pigs and primates. Thus, overexpression of human CD73 (hCD73) in the pig endothelial cells is considered as a method to reduce coagulopathy after pig-to-non-human-primate xenotransplantation. This study was performed to produce and breed transgenic pigs expressing hCD73 for the studies immune rejection responses and could provide a successful application of xenotransplantation. The transgenic cells were constructed an hCD73 expression vector under control porcine Icam2 promoter (pIcam2-hCD73) and established donor cell lines expressing hCD73. The numbers of transferred reconstructed embryos were $127{\pm}18.9$. The pregnancy and delivery rate of surrogates were 8/18 (44%) and 3/18 (16%). The total number of delivered cloned pigs were 10 (2 alive, 7 mummy, and 1 died after birth). Among them, three live hCD73-pigs were successfully delivered by Caesarean section, but one was dead after birth. The two hCD73 TG cloned pigs had normal reproductive ability. They mated with wild type (WT) MGH (Massachusetts General Hospital) female sows and produced totally 16 piglets. Among them, 5 piglets were identified as hCD73 TG pigs. In conclusion, we successfully generated the hCD73 transgenic cloned pigs and produced their litters by natural mating. It can be possible to use a mate for the production of multiple transgenic pigs such as ${\alpha}-1,3-galactosyltransferase$ knock-out /hCD46 for xenotransplantation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.54-61
• /
• 2012

This paper proposes a fusion method of the queen-bee evolution into the rank-based control of mutation probability for improving the performances of genetic algorithms. The rank-based control of mutation probability which showed some performance improvements than the original method was a method that prevented individuals of genetic algorithms from falling into local optimum areas and also made it possible for the individuals to get out of the local optimum areas if they fell into there. This method, however, showed not good performances at the optimization problems that had a global optimum located in a small area regardless of the number of local optimum areas. We think that this is because the method is insufficient in the convergence into the global optimum, so propose a fusion method of the queen-bee evolution into this method in this paper. The queen-bee evolution inspired by reproduction process of queen-bee is a method that can strengthen the convergency of genetic algorithms. From the extensive experiments with four function optimization problems in order to measure the performances of proposed method we could find that the performances of proposed method was considerably good at the optimization problems whose global optimum is located in a small area as we expected. Our method, however, showed not good performances at the problems whose global optima were distributed in broad ranges and even showed bad performances at the problems whose global optima were located far away. These results indicate that our method can be effectively used at the problems whose global optimum is located in a small area.

• Water for future
• /
• v.5 no.2
• /
• pp.17-29
• /
• 1972

The persent study aims at finding out a means of prevention cool spell damages on the hilly areas. The irrigation plots of 24 hour stored water warm water way and warm water plots, cool water way are respectively established to find out water temperature and influnce on the growing rice plants. The results obtained are summed up as follows. 1. Warm water areas consisted of $5 m^2 Q=0.93 1{\ell}/sec$, V=31 cm/sec, S=1/1, 000, L=81.6m, B=5cm, h=6cm, t=4min 33sec, drops=9 areas, are constructed to help the water temperature of $14.5^{\circ}C$ rise to that of $21.6^{\circ}C$. This indicates lower temperature than $23^{\circ}C$ of critical water temperature in irrigation facilities by $1.45^{\circ}C$ and than $26.2^{\circ}C$ of balanced water temperature of Seoul arears by $4.6^{\circ}C$. But this does not give much influance on rice plant cultivation. 2. The rising of water temperature is influened according to the temperature, solar radiation but the water temperature changes according to the heat absorption of organized materials, weather and terraces. The difference of water temperature could be found in the first growing stage. 3. Through the warm water way of water rises to the temperature of $21.6^{\circ}C$ which also rises to the temperature of around $30^{\circ}C$ in the paddy field of submerged irrigation. The rice plants are comparatively free from prolonged cool damage, reproduction abstructive damage. 4. The water temperature in rice field in proportion to temperature influence of weather condition but the water temperature approaches to that of weather in the days of later growing stage and water temperature become lower than the air temperature in the fruit stage. 5. The water in the submreged field is $10^{\circ}C$ warmer than in the warm water way during the first growing stage period but the water temperature in the warm water way is warmer in the later growing stage period. The cool water of $14.5^{\circ}C$ is warmed to $30.1^{\circ}C$ and rice plants cultivation is free from other damages. 6. The 12% increased production or 570.98kg/10a is made cool water plot by rising the temperature of water from $14.5^{\circ}C$ to $21.6^{\circ}C$ making the water run through warm water way. 7. The damage inflicted by the cool water irrigation during the first growing stage period is the obstruction of peak tillering stage and the obstruction of heading the later growing stage period and the obstruction of fruiting and number of panides per fill.

• Journal of Korean Society of Forest Science
• /
• v.82 no.2
• /
• pp.176-187
• /
• 1993

Based on the analysis of ecomorphological characters for 84 tree and shrub species, climax indices were estimated so as to interpret the position of the successional sere for the species in the natural deciduous forest. Nineteen ecomorphological characters, considered to be associated with successional gradient in the forest, were selected for the study. One of 2 to 4 steps per character for each species was given on a standardized scale of increasing climaxness, and the index was computed by percent of the sum of the scoring values for total score. Calculated mean value of 54.2 for all indices. Carpinus laxiflora had the highest index value of 83.3, and Populus davidiana recorded the lowest of 18.8. The most climax group, greater than 70 of the index, contained only 9 species, intermediate group, between 40 to 70 of the index, had 58 species, and the most pioneer group, less than 40 of the index comprised 17 species. The result has noticed that the large number of species would take advantage of most diverse resource and niche in the intermediate stage of the sere in the forest. The three components, i.e., light absorption, reproduction, and wood quality were used as axes for a 3-dimensional projection of the relative position for 44 species by principal component analysis. Along the similar ecomorphological characters, four recognized species group were classified by cluster analysis. The distribution pattern of plant families on the index gradient showed that the Betulaceae and Aceraceae had the widest seral amplitude, and the Salicaceae was a family typified as pioneer. There were no families specializing entirely with climax niche.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.64-72
• /
• 2020

DELAY M9 is an ammunition used in combination with the fuse M904 and M905 of aviation drop-off ammunitions. Due to the properties of the ammunition, the performance or safety of the ammunition cannot be verified until it is used, because of its one-time function, no reproduction and is finally destroyed at the same time. Long-term storage of ammunition in use by the army is inevitable due to its operational characteristics, and a test evaluation is required to maintain and verify the performance of stored ammunition for immediate use in case of emergency. This paper estimates the reliability and shelf life of the DELAY M9 ammunition by using the test data obtained through ASRP performed from the past to the present. The result of the performance evaluation test for the currently stored DELAY M9 ammunition is analyzed, and the reliability and shelf-life of the stored ammunition are assessed by examining the number of defects according to the storage time and production year. This research result can be used to manage the stored ammunition, such as ASRP planning and evaluation test, result analysis and munition state decision.

• Development and Reproduction
• /
• v.13 no.4
• /
• pp.321-327
• /
• 2009

This study aimed to examine the testis toxicities of metal compound, manganese (Mn), which may be generated as mist or fume in the industrial sites. As well as serum prolactin (PRL) concentration was analyzed because Mn accumulation in basal ganglia up-regulates serum PRL and hyperprolactinemia consecutively induces the testis toxicity. Male F344 rats were divided into the 4 groups (2 controls and 2 Mn treated groups, n=10) on the basis of the test condition (inhalation, Mn $1.5mg/m^3$ or not) and treatment period (for 4-weeks and 13-weeks). The treatment time was 6 hr. a day, 5 days a week for the whole body. Basic tests including changes in body weight, feed rate were observed. Blood and testis Mn concentration, and testis toxicity test such as the number and deformity test of sperm were also observed. Serum PRL level was analyzed by ELISA to certify the relationship between the Mn induced increase of the serum PRL level and sperm production. Blood and testis Mn concentrations were significantly and dose-dependently increased. Sperm count was decreased in Mn-treatment groups than control in a treatment time dependent manner. Morphological analysis of cauda epidydimal sperm showed that the frequencies of morphologically abnormal sperms such as bent tail and small head were increased in the both Mn-treatment groups than control. A significant increase in serum PRL levels was found in response to Mn treatment but it was not hyperprolactinemia range. These results suggest that treatment of Mn up-regulates the serum PRL concentration and induces the testis toxicity. The No Aversed Effect Level (NOAEL) of inhaled Mn on the male rat testis may be under the $1.5mg/m^3$.

• Reproductive and Developmental Biology
• /
• v.35 no.4
• /
• pp.399-405
• /
• 2011

The number of abandoned dogs is increasing with the worsening of the economy and the rising of feed value. It was becoming a serious social problem because of the disease transmission and destruction of natural ecosystems by abandoned dogs been wild animal. In order to solve these problems, companion dogs necessary to secure its own genetic information and to establish the systematic tracking system. Using multiplex-PCR method with 27 microsatellite marker (MS marker) divided 3 set, various alleles occurring to 6 dog breed (Labrador Retriever, German Shepherd, English Springer Spaniel, Belgian Malinois, Jindo Dog, PoongSan Dog) make use of markers to determine allele frequency and heterozygosity. MS marker FH2834 and FH2790 have only two allele and most were found in 13 alleles at FH3381 and FH3399. Average heterozygosity of MS marker is 0.534 and especially, heterozygosity represented the highest value of 0.765 at FH3381. So, it was recognized appropriate allele frequency for individual identification and paternity diagnosis in companion dogs. Using multiplex-PCR method with MS marker, various alleles occurring to dog breed make use of markers to deter mine individual identification and paternity diagnosis, traits associated biomarkers and breed-specific marker for faster, more accurate and ways to reduce the analysis cost. Based on this result, a scientific basis was established to the existing pedigree data by applying genetics additionally. Animal registration system is expected to be conducted nationwide in future. The method expects to very useful this system.

• Reproductive and Developmental Biology
• /
• v.39 no.3
• /
• pp.83-88
• /
• 2015

The present study was devised to determine the effects of vitamin E and selenium (Selevit) on body weight, organ weight, hematological values and biochemical parameters in the orchidectomized (Orch) rats. Intact group (n=15) received no treatment and operation. Orch+Selevit received operation and Selevit. The body weights of each group increased, but that of the Orch＋Selevit group were significantly lower than those of all the other groups. There were significantly different decreased (p<0.001) of body weights between Orch＋Selevit group and all the other groups. Also, organ weights such as heart, liver, spleen, kidney, lung and skeletal muscle were measured. The heart and liver weights in the Orch＋Selevit group were significantly different decreased (p<0.001) in comparison with those in the Intact and Sham groups. The kidney weights in the Orch＋Selevit group were significantly different decreased (p<0.01, p<0.001) in comparison with those in all the other groups. The number of white blood cell (WBC) was significantly higher (p<0.05) in the Orch＋Selevit group than in all the other groups. The hematological values of 12 parameters were not significantly different in any of the groups. The concentrations of serum total protein, albumin and alkaline phosphatase only increased significantly (p<0.05, p<0.01) in the Orch＋Selevit group as compared to that in the Orch group. We conclude that Selevit was significantly decreased the body weight in the Orch rats. Our findings suggest that Selevit may influence the process of lipid packaging and absorption in the Orch rats.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.