• Journal of Gastric Cancer
• /
• v.17 no.4
• /
• pp.331-341
• /
• 2017

Purpose: This study aimed to evaluate the clinical significance of microscopic invasion to determine the adequate resection margin in early gastric cancer (EGC). Materials and Methods: A retrospective review was performed that included patients who underwent gastrectomy for clinical early gastric cancer (cEGC) at Seoul National University Hospital between January 2007 and December 2010. After subtracting the microscopic resection margin from the gross resection margin for each proximal or distal resection margin, microscopic invasion was represented by the larger value. Microscopic invasion and its risk factors were analyzed according to the clinicopathologic characteristics. Results: In total, 861 patients were enrolled in the study. Microscopic invasion of cEGC was $6.0{\pm}12.8mm$, and the proportion of patients with microscopic invasion ${\geq}0mm$ was 78.4%. In the risk group, tumor location, pT stage, and differentiation did not significantly discriminate the presence of microscopic invasion. The microscopic invasion of EGC-IIb was $13.9{\pm}16.8mm$, which was significantly greater than that of EGC-I. No linear correlation was observed between the overall tumor size and microscopic invasion (R=0.030). The independent risk factors for microscopic invasion ${\geq}20mm$ were EGC-IIb vs. EGC-I/IIa/IIc/III (odds ratio [OR], 3.103; 95% confidence interval [CI], 1.533-6.282; P=0.002) and male vs. female sex (OR, 1.655; 95% CI, 1.012-2.705; P=0.045). Conclusions: Male sex and EGC-IIb were independent risk factors for microscopic invasion ${\geq}20mm$. Examination of intraoperative frozen sections is highly recommended to avoid resection margin involvement, especially in cases of EGC-IIb.

• Journal of architectural history
• /
• v.29 no.1
• /
• pp.51-64
• /
• 2020

Southern Royal Villa served as an accommodation for the prince in early Joseon Dynasty, and as an official residence and banquet room for Chinese diplomats in the later period. It was facing south and was located at the southern part of the old town of Seoul and to the north of the Southern Gate. The place was divided into four parts: the outmost, the middle, the inner-middle and the inner part beginning from the south and with important buildings placed in the inner part. The residence for the first and the second highest diplomats was situated at the northernmost location. The residence for the highest diplomat was a two-story building. On the west side of the residence was the large scale Western Banquet Room. It consisted of a single wide hall suited for a grand ceremony, and had the greatest formality and solemnity. On the southwestern side of the diplomatic residence was a building which was called Momchae before the early 17th century and Namru(南樓) after the 19th century. Namru in the inner-middle part is the half-sized remnant of Momchae, which used to be the largest building in the Southern Royal Villa. The title 'Momchae (meaning Main Buildling)' signifies that the building represented the entire Villa when it was built as an accommodation for princes. The layout of the Villa in early Joseon Dynasty, which was centered around Momchae, is highly likely to have been a common structure of royal villa for princes during the period.

• Cross-Cultural Studies
• /
• v.27
• /
• pp.497-523
• /
• 2012

Characteristics of the Listening and Pronunciation of Korean Obstruents of Chinese Learners -Based on the Phonetic Experiments Using Kalvin and Praat- This study aims at investigating the characteristics of confrontation in three ways, lax/ fortis/ aspirated consonants, in Korean obstruents through experimental phonetic analysis for the Chinese Korean language learners. On one hand, as a result of comparing Korean and Chinese obstruent systems, there is no big difference regarding the articulatory location. On the other hand, in regards to the articulatory method there is a difference. In a Korean obstruent system, the confrontation presented in three ways by the strength of aspiration. On the contrary, the Chinese obstruent system showed confrontation in two ways by the existence of aspiration. To examine the difficulty of the learners caused by the above-mentioned reason objectively, this paper studied the relationship between input and output of sound through the experimental phonetic analysis such as Kalvin and Praat. To research the input of sound, the listening ability of the learners was examined by 'Choosing Consonant' among the Menu of Kalvin. As a result of that experiment, many errors were shown. They recognized the fortis as lax in the area of affricates and plosives. In the area of fricatives, they recognized affricatives as fricatives. To investigate the output of sound, the section of aspiration and the section of friction of a plosive, an affricate and a fricative in Praat, were expressed numerically. The learners' VOT of lax and affricate represented that lax was pronounced close to the fortis, and the VOT of fricatives was not shown the section of aspiration and friction clearly, and also the result showed that they pronounced a fricative like affricative-aspirated one. The result shows that the learners' pronunciation is related to the listening ability. The consequence is caused by the characteristics of the difference between Korean obstruents and Chinese ones. If the training pronunciation is conducted based on above result, it would be a better methodology in teaching Korean.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1370-1378
• /
• 2008

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important. In the case of the system such as RF-CBTC(Radio Frequency-Communication Based Train Control), sometimes failure in correctness of train controlling information may happen because the information is sent throughout wireless transmission between on-board system of a train and wayside transmitter, and then, it is exposed to noises. Of RF-channel interference, there are various forms. Under the environment of mobile telecommunications, adjacent-channel interference and Co-channel interference are in trouble, and under the environment of the wireless LAN, inter-symbol interference is in trouble. Also, the system of the cellular CDMA mobile telecommunication is affected on the RF-channel interference such as Doppler effect, multi-cell interference, and other users' intervention. In this paper, we analyzed the effect of the train control information related to fading, intervention and other noises made in the underground interval and explained the transmission characteristics numerically. Furthermore, we calculated the mean of the error terms by increasing users in the system of the cellular CDMA. As the method for decrease the error term of sent information, we represented the way adjusting the arrangement of antennas, and we did the model related to the system of RF-CBTC in which the location of an antenna is calculated with really measured value of the transmission characteristics and the way confirming reliability of the wireless transmission.

• Atmosphere
• /
• v.31 no.4
• /
• pp.445-459
• /
• 2021

This study uses a cloud-resolving storm simulator (CReSS) to understand the individual effect of determinant meteorological factors on snowfall characteristics in the Yeongdong region based on the rawinsonde soundings for two snowfall cases that occurred on 23 February (Episode 1) and 13 December (Episode 2) 2016; one has a single-layered cloud and the other has two-layered cloud structure. The observed cloud and precipitation (snow crystal) features were well represented by a CReSS model. The first ideal experiment with a decrease in low-level temperature for Episode 1 indicates that total precipitation amount was decreased by 19% (26~27% in graupel and 53~67% in snow) compared with the control experiment. In the ideal experiment that the upper-level wind direction was changed from westerly to easterly, although total precipitation was decreased for Episode 1, precipitation was intensified over the southwestern side (specifically in terrain experiment) of the sounding point (128.855°E, 37.805°N). In contrast, the precipitation for Episode 2 was increased by 2.3 times greater than the control experiment under terrain condition. The experimental results imply that the low-level temperature and upper-level dynamics could change the location and characteristics of precipitation in the Yeongdong region. However, the difference in precipitation between the single-layered experiment and control (two-layered) experiment for Episode 2 was negligible to attribute it to the effect of upper-level cloud. The current results could be used for the development of guidance of snowfall forecast in this region.

• Journal of Biomedical Engineering Research
• /
• v.43 no.6
• /
• pp.424-433
• /
• 2022

As the proportion of non-contact telemedicine increases and the number of electrocardiogram (ECG) data measured using portable ECG monitors increases, the demand for automatic algorithms that can precisely analyze vast amounts of ECG is increasing. Since the P, QRS, and T waves of the ECG have different shapes depending on the location of electrodes or individual characteristics and often have similar frequency components or amplitudes, it is difficult to distinguish P, QRS and T waves and measure each parameter. In order to measure the widths, intervals and areas of P, QRS, and T waves, a new algorithm that recognizes the start and end points of each wave and automatically measures the time differences and amplitudes between each point is required. In this study, the start and end points of the P, QRS, and T waves were measured using six Deep Neural Networks (DNN) that recognize the start and end points of each wave. Then, by synthesizing the results of all DNNs, 12 parameters for ECG characteristics for each heartbeat were obtained. In the ECG waveform of 10 subjects provided by Physionet, 12 parameters were measured for each of 660 heartbeats, and the 12 parameters measured for each heartbeat well represented the characteristics of the ECG, so it was possible to distinguish them from other subjects' parameters. When the ECG data of 10 subjects were combined into one file and analyzed with the suggested algorithm, 10 types of ECG waveform were observed, and two types of ECG waveform were simultaneously observed in 5 subjects, however, it was not observed that one person had more than two types.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.3
• /
• pp.159-169
• /
• 2024

This paper proposes a new real-time fire monitoring and evacuation navigation system by integrating Augmented Reality (AR) technology with Internet of Things (IoT) technology. The proposed system collects temperature data through IoT temperature measurement devices installed in buildings and automatically transmits it to a MySQL cloud database via an IoT platform, enabling real-time and accurate data monitoring. Subsequently, the real-time IoT data is visualized on a 3D building model generated through Building Information Modeling (BIM), and the model is represented in the real world using AR technology, allowing intuitive identification of the fire origin. Furthermore, by utilizing Vuforia engine's Device Tracking and Area Targets features, the system tracks the user's real-time location and employs an enhanced A^* algorithm to find the optimal evacuation route among multiple exits. The paper evaluates the proposed system's practicality and demonstrates its effectiveness in rapid and safe evacuation through user experiments based on various virtual fire scenarios.

• Archives of design research
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2000

The purpose of this study is to find out what is the preference of users according to the location of benches at urban community parks. This location of benches is seperated into 4 patterns according to arranging pattern of water space, a walk, pergola and shelter, greenspace. To investigate the visual preference is examined by analyzing visual volume of 4 patterns. Results are as follows; 1. Factor analysis by the total data showed that 5 factors explain 60.40 percent of total variance of the location of bench visual character. They were classified by the sensitive factor, visual factor, physical-individual factor, distinct factor, density factor. Among 5 factors, the sensitive factor which represented psychological reaction was appreciated to be highest. 2. Most of 20 items showed the following scores of mean values in sementic differential experiment : Spot 1->Spot 4-> 2-> 3. The mean values between arrangement place locational differences showed significantly, that could explain to be a violent contrast between the natural factors(weater space, green space, etc) and the artificial factors (around of pergola, shelter, etc)

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.320-334
• /
• 2020

This study presents an application of hydro-mechanical coupled Particle Flow Code 3D (PFC3D) to simulation of fluid injection induced fault slip experiment conducted in Mont Terri Switzerland as a part of a task in an international research project DECOVALEX-2019. We also aimed as identifying the current limitations of the modelling method and issues for further development. A fluid flow algorithm was developed and implemented in a 3D pore-pipe network model in a 3D bonded particle assembly using PFC3D v5, and was applied to Mont Terri Step 2 minor fault activation experiment. The simulated results showed that the injected fluid migrates through the permeable fault zone and induces fault deformation, demonstrating a full hydro-mechanical coupled behavior. The simulated results were, however, partially matching with the field measurement. The simulated pressure build-up at the monitoring location showed linear and progressive increase, whereas the field measurement showed an abrupt increase associated with the fault slip We conclude that such difference between the modelling and the field test is due to the structure of the fault in the model which was represented as a combination of damage zone and core fractures. The modelled fault is likely larger in size than the real fault in Mont Terri site. Therefore, the modelled fault allows several path ways of fluid flow from the injection location to the pressure monitoring location, leading to smooth pressure build-up at the monitoring location while the injection pressure increases, and an early start of pressure decay even before the injection pressure reaches the maximum. We also conclude that the clay filling in the real fault could have acted as a fluid barrier which may have resulted in formation of fluid over-pressurization locally in the fault. Unlike the pressure result, the simulated fault deformations were matching with the field measurements. A better way of modelling a heterogeneous clay-filled fault structure with a narrow zone should be studied further to improve the applicability of the modelling method to fluid injection induced fault activation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.13-29
• /
• 2021

The purpose of this study was to analyze the spatial distribution and location factors of startups by generation (young and middle-aged) in Seoul. To this end, a research model was established that included factors of industry, population, and startup institutions by generation in 424 administrative districts using the Seoul Business Enterprise Survey(2018), which includes data on the age group of entrepreneurs. As an analysis method, descriptive statistics were conducted to confirm the frequency, average and standard deviation of startups by generation and major variables in the administrative districts of Seoul, and spatial distribution and characteristics of startups by generation were analyzed through global and local spatial autocorrelation analysis. In particular, the spatial distribution of startups in Seoul was confirmed in-depth by categorizing and analyzing startups by major industries. Afterwards, an appropriate spatial regression analysis model was selected through the Lagrange test, and based on this, the location factors affecting startups by generation were analyzed. The main results derived from the research results are as follows. First, there was a significant difference in the spatial distribution of young and middle-aged startups. The young people started to startups in the belt-shaped area that connects Seocho·Gangnam-Yongsan-Mapo-Gangseo, while middle-aged people were relatively active in the southeastern region represented by Seocho, Gangnam, Songpa, and Gangdong. Second, startups by generation in Seoul showed various spatial distributions according to the type of business. In the knowledge high-tech industries(ICT, professional services) in common, Seocho, Gangnam, Mapo, Guro, and Geumcheon were the centers, and the manufacturing industry was focused on existing clusters. On the other hand, in the case of the life service industry, young people were active in startups near universities and cultural centers, while middle-aged people were concentrated on new towns. Third, there was a difference in factors that influenced the startup location of each generation in Seoul. For young people, high-tech industries, universities, cultural capital, and densely populated areas were significant factors for startup, and for middle-aged people, professional service areas, low average age, and the level of concentration of start-up support institutions had a significant influence on startup. Also, these location factors had different influences for each industry. The implications suggested through the study are as follows. First, it is necessary to support systematic startups considering the characteristics of each region, industry, and generation in Seoul. As there are significant differences in startup regions and industries by generation, it is necessary to strengthen a customized startup support system that takes into account these regional and industrial characteristics. Second, in terms of research methods, a follow-up study is needed that comprehensively considers culture and finance at the large districts(Gu) level through data accumulation.