• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.262-268
• /
• 1998

This research is to examine the selected method of optimal mixing proportion and cost analysis in the super flowing concrete. As confined water $ratio($\beta_p$)$ and K is introduced, itis to establish optimal mixing design of super flowing concrete according to the steps of paste, mortar and concrete. From paste and mortar test, it was led to $$\beta_p$$ and $K_p$satisfying the optimum condions depending on the kinds of binders. Then $$\beta_p$$ and $K_p$ is reflected to the mix condition of super flowing concrete. The result of test, the mix condition of super flowing concrete satisfied the quality performance of concrete with adjustment of additional rate of the superplasticizer. Besides, in case of design strength $350kg/\textrm{cm}^2$ of concrete, material cost in super flowing concrete is able to be reduced 5~16% in replacement of fly ash 30% in ordinary portland cement and slag cement.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1189-1202
• /
• 1999

As compared with VOD data, NOD article data has the following characteristics: it is created at any time, has a short life cycle, is selected as not one article but several articles by a user, and has high access locality in time. Because of these intrinsic features, user access patterns of NOD article data are different from those of VOD. Thus, building NOD system using the existing techniques of VOD system leads to poor performance. In this paper, we analysis the log file of a currently running electronic newspaper, show that the popularity distribution of NOD articles is different from Zipf distribution of VOD data, and suggest a new popularity model of NOD article data MS-Zipf(Multi-Selection Zipf) distribution and its approximate solution. Also we present a life cycle model of NOD article data, which shows changes of popularity over time. Using this life cycle model, we develop LLBF (Largest Life-cycle Based Frequency) prefetching algorithm and analysis he performance by simulation. The developed LLBF algorithm supports the similar level in hit-ratio to the other prefetching algorithms such as LRU(Least Recently Used) etc, while decreasing the number of data replacement in article prefetching and reducing the overhead of the prefetching in system performance. Using the accurate user access patterns of NOD article data, we could analysis correctly the performance of NOD server system and develop the efficient policies in the implementation of NOD server system.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.169-174
• /
• 2003

Design of a rational earth volume conversion coefficient is required as the earth volume conversion coefficient may give great influence on construction work volume and construction costs in the civil engineering works where large-scaled earth volume is excavated. However, there are a great deal of difficulties in the calculation of the exact spoil surface earth and Insufficient earth volume by adopting the figures presented on the generally used design specifications which are not the results obtained from the selection tests in calculating the earth volume conversion coefficient. In this connection, it would be desirable to calculate the earth volume conversion coefficient by carrying out large-scaled site test adequate for the relevant environment. In consequence, this study aims at calculating the exact earth volume conversion coefficient of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative exactness degree of the crossing was calculated at 0.5% in average. The relative exactness degree of 0.5% in the volume may be judged as an exact measurement as it corresponds to 0.17% of the relative exactness degree in the length measurement. We have calculated the exact earth volume conversion coefficient by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with the earth volume conversion coefficient determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of earth volume conversion coefficient, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.

• Journal of Veterinary Science
• /
• v.22 no.4
• /
• pp.58.1-58.13
• /
• 2021

Background: The morphometry of the acetabulum is one source of information that assists in the clinical diagnosis of the hip and influences the proper selection of a prosthesis, reducing post-operative complications such as those seen in total hip replacement (THR). However, acetabular parameters in small-breed dogs are rarely reported. Objectives: To investigate acetabular parameters using radiography and computed tomography (CT) in small-breed dogs with Maltese and Shih Tzu dogs used as model breeds. Methods: Standard calibrated, extended hip radiographs and CT images were obtained. Subsequently, acetabular width (AW) in various directions was measured using radiography and CT, whereas acetabular depth (AD) was obtained by CT. Acetabular index (AI) is a ratio calculated from AD and AW. Results: The values of AW and AD were much higher in Shih Tzu than in Maltese dogs. Male Shih Tzus showed higher values of these parameters than females, while sex-based differences in most of the parameters could not be detected in Maltese. Body weight, but not age, influenced AWs and ADs. While AWs and ADs were influenced by several factors, AI was comparable among the assessed factors and between Maltese and Shih Tzu dogs (p = 0.172; 31.42 ± 1.35 and 32.60 ± 1.80, respectively). Also, AI did not vary with breed, sex, or body size. Conclusions: The obtained radiographic and CT acetabular parameters could be useful as guidelines for evaluating the acetabulum of small-breed dogs in clinical practice.

• Journal of Chest Surgery
• /
• v.57 no.1
• /
• pp.36-43
• /
• 2024

Background: Coronavirus disease 2019 (COVID-19) can lead to acute respiratory failure, which frequently necessitates invasive mechanical ventilation and extracorporeal membrane oxygenation (ECMO). However, the limited availability of ECMO resources poses challenges to patient selection and associated decision-making. Consequently, this retrospective single-center study was undertaken to evaluate the characteristics and clinical outcomes of patients with COVID-19 receiving ECMO. Methods: Between March 2020 and July 2022, 65 patients with COVID-19 were treated with ECMO and were subsequently reviewed. Patient demographics, laboratory data, and clinical outcomes were examined, and statistical analyses were performed to identify risk factors associated with mortality. Results: Of the patients studied, 15 (23.1%) survived and were discharged from the hospital, while 50 (76.9%) died during their hospitalization. The survival group had a significantly lower median age, at 52 years (interquartile range [IQR], 47.5-61.5 years), compared to 64 years (IQR, 60.0-68.0 years) among mortality group (p=0.016). However, no significant differences were observed in other underlying conditions or in factors related to intervention timing. Multivariable analysis revealed that the requirement of a change in ECMO mode (odds ratio [OR], 366.77; 95% confidence interval [CI], 1.92-69911.92; p=0.0275) and the initiation of continuous renal replacement therapy (CRRT) (OR, 139.15; 95% CI, 1.95-9,910.14; p=0.0233) were independent predictors of mortality. Conclusion: Changes in ECMO mode and the initiation of CRRT during management were associated with mortality in patients with COVID-19 who were supported by ECMO. Patients exhibiting these factors require careful monitoring due to the potential for adverse outcomes.

• Journal of Chest Surgery
• /
• v.55 no.1
• /
• pp.69-76
• /
• 2022

Background: While the use of bioprosthetic valves for mitral valve replacement (MVR) is increasing, very few studies have compared bovine pericardial and porcine valves in the mitral position to help guide bioprosthetic selection. Methods: In the present study, patients who underwent MVR using bovine pericardial valves were compared with those who underwent MVR with porcine bioprostheses between January 1996 and July 2018. Those with prior MVR, infective endocarditis, congenital mitral valve disease, or ischemic mitral regurgitation were excluded. The primary outcomes were structural valve deterioration (SVD) and mitral valve reoperation from any cause, and death was regarded as a competing risk. Competing risk analysis and propensity score-matching were used for comparisons. Results: Among the 388 patients enrolled, pericardial and porcine bioprostheses were implanted in 217 (55.9%) and 171 (44.1%), respectively. Propensity score-matching yielded 122 pairs of patients that were well-balanced for all baseline covariates. No significant differences were observed between the groups in unadjusted (p=0.09) and adjusted overall survival (hazard ratio [HR], 1.13; 95% confidence interval [CI], 0.72-1.76; p=0.60). Competing risk analysis revealed no significant differences in the risks of mitral reoperation (HR, 1.07; 95% CI, 0.50-2.27; p=0.86) and development of SVD (HR, 1.57; 95% CI, 0.56-4.36; p=0.39) between the groups. Matched population analysis confirmed similar results regarding reoperation (HR, 0.99; 95% CI, 0.40-3.22; p=0.98) and SVD (HR, 1.39; 95% CI, 0.41-4.73; p=0.60). Conclusion: No significant differences in survival or valve durability were observed between bovine pericardial and porcine bioprosthetic MVR. These findings require further validation through studies with larger sample sizes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2023

Converter slag is a by-product generated by refining the pig iron produced into molten steel in the blast furnace, occupying about 15 % of the weight of steel production. It has a high free-CaO content that can generate expansion cracks when used for concrete aggregate. This is the main reason to make it difficult to recycle. To solve this problem, government guideline requires that converter slag has to be aged in an open yard for 90 days. However, aging can not be perfectly performed because it entails time and cost. In this study, we tried to investigate the applicability of converter slag as a cementitious material rather than an aggregate by mixing converter slag with mortar formulations. According to the EDS results of the converter slag in the experiment, we found that screening in the aggregate phase was more effective than that in the powder phase. When the particles separated by a magnet in the aggregate state were pulverized and used for concrete up to a 15 % replacement ratio, various engineering characteristics, such as flow, length change, and compressive strength, showed engineering characteristics similar to those of the control mix.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.5
• /
• pp.611-621
• /
• 2001

Objective : We analyzed the clinical and endocrinological results of the transsphenoidal microsurgery for ACTH secreting pituitary adenomas. Marerials and Methods : From October 1995 to August 2000, 18 patients underwent transsphenoidal microsurgery for Cushing's disease. We analyzed the surgical results of 17 patients, one patient who was previously operated from other hospital was excluded. Age of the patients were 18 to 61 years old(mean 37.7), male to female ratio was 1 : 3.3, and follow-up period was 3 to 50 months(mean 20.3). The selection of candidates for transsphenoidal exploration was based on endocrinologic criteria. Magnetic resonance imaging was the preferred radiologic test. Selective inferior petrosal sinus sampling of adrenocorticotropic hormone futher refined the diagnosis when endocrinologic and radiologic procedures were not definitive. Results : Results of the preoperative endocrinological test were : level of serum ACTH 29.4 to $225{\mu}g/dL$(mean $93.88{\mu}g/dL$) ; serum cortisol 11.9 to $47.5{\mu}g/dL$(mean $27.49{\mu}g/dL$) ; 24-hour urine free cortisol 235 to $1019{\mu}g/day$(mean $571.0{\mu}g/day$). Inferior petrosal sinus sampling for ACTH was performed in 11 patients and all were confirmed by Cushing's disease and we could predict the laterality of the tumor in 9 of 11 patients. We performed transsphenoidal selective adenomectomy in 5 patients, adenomectomy and subtotal hypophysectomy in 2 patients, adenomectomy and partial hypophysectomy in 9 patients, and in the remaining one patient, hemihypophysectomy followed by total hypophysectomy due to remission failure. Fifteen of 17 patients(88.2%) showed endocrinological remission. Glucocorticoid replacement therapy was performed in all the patients who showed remission for 1 to 24 months(mean 5.9 months), and 6 patients received steroid over 6 months. Conclusion : We conclude that the direct demonstration of a tumor in the pituitary gland by MRI is the most important and definitive diagnostic tool and the location of a mass should be confirmed with increased level of ACTH by the inferior petrosal sinus sampling. Transsphenoidal microsurgery is effective treatment modality for Cushing's disease and the immediate postoperative evaluation of the surgical resection of the tumor is very important. The patients should show hypocortisolism, decreased, subnormal serum ACTH and cortisol levels and 24-hours urine free cortisol. We performed 18 transsphenoidal microsurgery for Cushing's disease in 17 patients and 15 patients(88.2%) showed endocrinological remission.