• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1E
• /
• pp.23-28
• /
• 2009

At the crossings of turnout systems, noise is generated by the impact of train on the connection points. However, rapid movement changes between rail and wheels on connection point are inevitable on existing turnout section which may cause safety concern as well as noise problem caused by repeated impact load by passing train. And given the turnout is a complicated system which combines various functions such as rolling stock, trackbed, signaling, communication and electrical system, it's very difficult to expect to improve the overall performance of the turnout in such a way of optimizing only particular part of such integrated system. Since the turnout is the only movable section among the integrated parts and has complicated structure that inevitably brings about quick and sudden movement, safety has been still put on the top of the list. This study was aimed at comparing and analyzing the noise data obtained around the turnout of existing railway, by categorizing them into tilting train, high speed train and traditional train, and by distance, speed and type of turnout. And based on the data measured, the forecast of noise level when tilting train accelerates around a turnout was conducted in the study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.7
• /
• pp.871-880
• /
• 1999

In this paper an experimental study is presented of the problem of dynamic behavior of a water droplet impinging upon a heated surface. The experiments are mainly focused on the effects of impinging angle of a droplet and surface temperature on the impact dynamics of the droplet. It Is clarified that the droplet exhibits much different behavior depending on the normal momentum of an impinging droplet before impact. At surface temperature In the nucleate boiling regime. the disintegration of a droplet doesn't occur, whereas the deforming droplet adheres to the surface. The spreading and contraction of the liquid film is repeated a couple of times for the horizontal surface but the expanded droplet just slips without noticeable contraction for the inclined surfaces. In the film boiling regime, the impinging droplet spreads over the surface as a liquid film which is separated from the surface by produced vapor. Depending on the magnitude of the normal momentum of the droplet the disintegration into the several irregular shapes of liquid elements occurs for the horizontal and 30o-inclined surfaces, whereas the impinging droplet for the 60o-inclined surface doesn't break up and tends to recover the original spherical shape.

• Journal of Korea Multimedia Society
• /
• v.25 no.7
• /
• pp.964-972
• /
• 2022

The Uncanny Valley phenomenon has already been deemed as theoretical, and the characteristics of game character expression elements for the Uncanny Valley phenomenon were recognized through case analysis as well. By theoretical consideration and case studies, it was found out that the influential elements of the Uncanny Valley phenomenon can be classified as two primary factors: character surface treatment and facial expression animation. The prepared experimental materials and adjectives were measured to be Five-Point Likert Scale. The measured results were evaluated for both influence and comparative analysis through essential statistical analysis and Repeated Measuring ANOVA in SPSS. The conclusions which were drawn from this research are as follows: The surface treatment of characters did not substantially affect the Uncanny Valley phenomenon. Instead, character's expression animation had a significant impact on the Uncanny Valley phenomenon, which also led to another conclusion that the facial expression animation had an overall deeper impact on Uncanny Valley phenomenon compared with character's surface treatment. It was the unnatural facial expression animation that controlled all of the independent variables and also caused the Uncanny Valley phenomenon. In order for game characters to evade the Uncanny Valley phenomenon and enhance game immersion, the facial expression animation of the character must be done spontaneously.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.688-695
• /
• 2017

Compared to metal, CFRP has excellent mechanical characteristics in terms of intensity, hardness, and heat resistance as well as its light weight that it is used widely in various fields. Therefore, this material has been used recently in the aerospace field. On the other hand, the material has shortcomings in terms of its extreme vulnerability to damage occurring internally from an external impact. This study examined the intensity up to its destruction from repeated use with the internal impact of a CFRP laminated plate that had also been exposed to external impact obtain design data for the external plate of aircraft used in the aerospace field. For the experimental method, regarding the quasi-isotopic type CFRP specimen and orthotropic CFRP specimen that are produced with a different layer structure, steel spheres with a diameter of 5 mm were collided to observe the resulting impact damage. Through a 3-point flexural fatigue experiment, the progress of internal layer separation and impact damage was observed. Measurements of the flexural fatigue strength after the flexural fatigue experiment until internal damage occurs and the surface impacted by the steel spheres revealed the quasi-isotopic layer structure to have a higher intensity for both cases.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.366-374
• /
• 1992

Mechanical and impact properties of stitched S2 glass fiber reinforced polyester woven laminates composites have been studied. Laminates were stitched using Kevlar 49 thread with 1/2, 1, and 2 inch stitch spacing. Tensile and 3-point bending tests haute been performed to evaluate the mechanical properties of stitched and unstitched laminates. Impact tests at applied energy of 234.7J were performed to examine the impact behavior and toughness changes of the specimen. The same specimens were also tested repeatedly at low impact energy level of 110.2J for 3 times to evaluate damage tolerance properties. The tensile and 3-point bending test results showed that one inch spacing specimen had the highest tensile and flexural strength. It also showed the highest energy absorption capability and the best damage tolerance property at the repeated impact test. The half inch spacing specimen showed the lowest tensile strength and energy absorption property at the impact energy level of 234.7J, even though it had the highest frequency of stitching thread.

• Clinical and Experimental Pediatrics
• /
• v.52 no.11
• /
• pp.1200-1206
• /
• 2009

Child sexual abuse is not a rarely encountered problem. Child sexual abuse is a pediatric disease entity with lifelong impact. Child sexual abuse, different from sexual assault, is not always accompanied by violent force and usually repeated over a period of time. Child sexual abuse should be approached by multidisciplinary team experts. Every pediatrician should know the child protection network in his district and be competent in the child sexual abuse medical evaluation and treatment as a primary doctor. In order to accomplish that goal, the Korean Pediatric Society should change the pediatric residency training curriculum and foster child sexual abuse experts. Pediatricians have responsibilities to do their active role in response to children at risk.

• Management Science and Financial Engineering
• /
• v.14 no.2
• /
• pp.105-118
• /
• 2008

There are many debates on the topic of the relationship between oil prices and economic growth. Through the repeated processes of conformations and contractions on the subject, two main issues are developed; one is how to define and drive oil shocks from oil prices, and the other is how to specify an econometric model to reflect the asymmetric relations between oil prices and output growth. The study, thus, introduces the unobserved component model to pick up the oil shocks and a first-order Markov switching model to reflect the asymmetric features. We finally employ unique oil shock variables from the stochastic trend components of oil prices and adapt four lags of the mean growth Markov Switching model. The results indicate that oil shocks exert more impact to recessionary state than expansionary state and the supply-side oil shocks are more persistent and significant than the demand-side shocks.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.954-959
• /
• 2011

The intensity of train load in the railway bridges is relatively large and continues to repeat. Also, the speed of vehicles is very fast. For these reasons, analyses for dynamic response under train load are necessary in the railway bridges. In other words, the dynamic characteristics of steel-composite bridges under train loads should be investigated considering effects of dynamic responses such as vibrations, repeated displacements and acceleration of bridge members. Therefore, in this study, static and dynamic analyses for the steel box girder bridges and I-girder bridges are carried out. Based on analyses results, we investigated and compared dynamic response considering the impact factors of domestic and foreign design specifications.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2902-2909
• /
• 2011

Regional torrential rains in summer this year due to abnormal climate changes compared to last year, have been frequent. Since Typhoon Rusa and Typhoon Maemi resulted in major damage to railroad facilities in 2002 and 2003 consecutively, problems with abnormal climate changes became a global problem including railroad and floods and droughts around the globe, heavy snow and winter warming have been repeated until now. Serious problem of radiation leakage in Fukushima nuclear power plant by the Tsunami due to 9.0-scale earthquake, this year in March, in northeastern Japan happened, and has given an impact on the life of Japanese citizens and industries and has also influenced on Korean. This shows how important to secure and to protect major national facilities including railroad structures to natural disasters such as earthquake. Therefore, we will briefly discuss about technologies for securing and protecting railroad structures to earthquakes, floods and other natural disasters.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2115-2124
• /
• 2011

The rail surface defects which are generated on repeated rolling contact fatigue are getting increased according to high speed, high density, and minimum weight. In addition, Increasing noise and vibration are affected by these also impact load generated as well. Because of this phenomenon, more serious and critical damages were occurred. In fact, in order to control them, the rail grinding were conducted. However, there are not enough researches to make an criteria of generating optimal rail grinding amount in Korea. This study evaluated how depth of hardening on rail surface is formed and suggested optimal rail grinding amount by RCF(rolling contact fatigue) test with generated contact pressure between KTX wheel and UIC60 rail by applying FEM analysis. Therefore, the amount was generated approximately 0.2mm/20MGT to maintain integrity of rail surface by getting rid of depth of hardening on rail according to rail accumulated passing tonnage.