• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1157-1162
• /
• 2011

The parking brake is an essential unit embedded in the track-driving motor of an excavator. The parking brake plays an important role in keeping the excavator in place not only when it is parked, but also during the digging operation. In fact, the load placed on the parking brake during the digging operation is significantly higher than the parking load, because the impact and rating loads caused by the bucket digging force cycle frequently and have very high load ranges. Therefore, the load conditions during the digging operation should be taken into account in the parking brake certification test. In this study, a series of experiments was carried out in which various operating pressures were applied to the parking brake, where repeated loads were reciprocally placed on the brake by locking the multifriction disc and releasing the hydraulic cylinder. The characteristics of the parking brake were investigated by comparing the obtained experimental results and the theoretical design specifications.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.144-150
• /
• 2013

This paper presents an analysis of door design for the Ui LRT based on experiments to predict doorway flow-time and their analyses results. A similar railway vehicle (from Gimhae LRT) and operational conditions are utilized to assess the doorway flow-time through repetitive experiments. Design of the experiments consists of four scenarios, and the experiments are repeated 39 times in total. We use the results of the experiments to verify the design of doors of Ui LRT (e.g. the required number of doors and their width). Various statistical analyses are carried out for the flow-time with respect to the number of boarding/alighting passengers. We make three category levels of boarding/alighting passengers, and analyze the mean and variance for each category, and then carry out One-Way ANOVA to analyze how the number of boarding/alighting and onboard passengers impact flow-time. The results of this paper can be used for making decisions about doors of the LRT vehicle.

• Journal of Korean Academy of Nursing
• /
• v.35 no.4
• /
• pp.745-753
• /
• 2005

Purpose. The purposes of this study were to 1) describe the type and frequency of aggressive behavior of cognitively impaired nursing home resident, 2) develop a caregiver training program on prevention and management of aggressive behavior, 3) examine the effects of caregiver training program on the incidence of aggressive behavior of cognitively impaired nursing home resident, and 4) examine the effects of caregiver training program on nursing staff's aggressive behavior management skills. Methods. One-group, time series, quasi-experimental design with a pre-test and two post- tests was used. Data were collected from cognitively impaired home residents (N = 32) and nursing staff (N = 36) in a proprietary nursing home using Ryden Aggression Scale I, II, and Aggressive Behavior Management Scale. Data were entered and analyzed by descriptive statistics and repeated measures ANOVA. Results. Incidence of aggressive behavior was high with a mean score of 3.09 (SD = 3.11) at baseline. Caregiver training program was developed based on Progressively Lowered Stress Threshold (PLST) model and gerontological and psychiatric literature. The mean scores of aggressive behavior at baseline, Post I, and II did not differ significantly although the difference approached to the significant level (F = 2.925, p = .066). Nursing staff's aggressive behavior management skills increased at Post I, and at Post II when compared to baseline, and the difference was significant (F=12.736, p=<.00l). Conclusion. Caregiver training program showed potential impact on reduction of aggressive behavior in elders with cognitive impairment and was effective in increasing nursing staff's aggressive behavior management skills.

• The Research Journal of the Costume Culture
• /
• v.20 no.1
• /
• pp.36-48
• /
• 2012

This study intends to provide fundamental data to develop creative high-value designs, proving that the cut-out technique, a decorative element of fashion design, can be used to express various visual effects. The author performed a literature review of such publications as Gap Press, Fashion News, and Mode & Mode from 2001S/S to 2010S/S, referring to Internet data to empirically analyze the cut-out technique in contemporary fashion. The study found that the cut-out design is effective overall, but is best suited for one-piece designs and for partial rather than whole items of clothing. The basic motif of the cut-out is a geometrical pattern based on a line, a tear, or is shapeless. The cut-out design is mostly shown as an overall pattern or as a symmetrical shape. Analysis shows that the characteristics of the contemporary fashion utilizing the cut-out technique are as follow: First, the cut-out technique exposes the curves of a woman's body in a direct or indirect way, thereby emphasizing her sexuality and maximizing the value of female beauty. Second, through the cut-out technique, we can highlight the various types of space formed by the technique and repeated patterns; we may also elaborate on single-patterned laser-cut designs, which will show that the particular surface effect of the material can strongly impact the attractiveness of the design through emphasis and decoration. Third, damaging or destroying clothes on purpose, showing surprising concepts through optical illusions, and expressing humor by ignoring existing clothing styles show our willingness to escape from traditional or obvious design ideas, as well as demonstrating individuality and playfulness.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.454-476
• /
• 2009

The purpose of this paper is to examine relation between trust building level and linkages's spatial characteristics on the logistics & storage industry of Busan. As a result, First, long-term & repeated interaction, information sharing & reciprocity, and interdependence & asset specificity have an important effect upon the micro trust which implies the highest trust. Proximity and uncertainty impact on the meso trust, the trust of middle level. Culture, norm, and formal institution of firms affect the macro trust, the lowest level of trust. Second, the micro, the meso, and the macro trusts mainly form in the local scale where spatial proximity is great. The higher the trust building levels become, the more spatial dimensions by linkage expand to national and international dimension, respectively. Third, these results appear more clearly in the output linkage than input linkage, in the service areas-many firm, in the horizontal linkage than vertical linkage, in the advanced evolution phases of firm connection, and in the supply chain management than outsourcing.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.4
• /
• pp.429-435
• /
• 2012

The purpose of this study was to determine the biomechanical effect of wearing carbon nanotube-based insole on cushioning and muscle tuning during drop landing. Twenty male university students(age: $21.2{\pm}1.5yrs$, height: $175.4{\pm}4.7cm$, weight: $70.2{\pm}5.8kg$) who have no musculoskeletal disorder were recruited as the subjects. Average axial strain, average shear strain, inversion angle, linear velocity, angular velocity, vertical GRF and loading rate were determined for each trial. For each dependent variable, a one-way analysis of variance(ANOVA) with repeated measures was performed to test if significant difference existed among different three conditions(p<.05). The results showed that Average axial strain of line 4 was significantly less in CNT compared with EVA and PU during IP phase. The average shear strain was less in CNT compared with EVA and PU during other phases. The inversion angle was increased in CNT compared with EVA and PU during all phase. In linear velocity, angular velocity, vertical GRF and loading rate, there were no significant difference between the three groups. This result seems that fine particle of carbon nanotube couldn't make geometric form which can absolve impact force by increasing density through eliminating voids of forms. Thus, searching for methods that keep voids of forms may play a pivotal role in developing of insole. This has led to suggestions of the need for further biomechanical analysis to these factors.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.2
• /
• pp.65-78
• /
• 2017

In this study, stable carbon isotopic analysis (22 specimens) and magnetic susceptibility analysis (23 specimens) were conducted out on the specimens collected from two points (trench DT1, DT2) in the floodplain of Jemincheon(hereinafter the Jemin plain) to reconstruct the Holocene Environments (Period I, Period II, Period III) of the Jemin plain in Gongju, Chungnam. The results were as follows: In Period I (approximately 7,480~4,940 yrs B.P.) and especially around 7,480~7,320 yrs B.P., it was cool-dry and there were two minor climate fluctuations. This period received a continuous flow of sediments, rather than massive amounts of sediments due to abrupt flooding, and therefore, there was almost no soilization process. Period II(approximately 4,940~2,600 yrs B.P.) was also relatively cool-dry. However, in Period II b, unlike I, the minor climate fluctuations were less pronounced. In this period, flooding and desiccation repeated, inducing soilization processes especially around 3,160 yrs B.P. In Stage III (~360 yrs B.P.), it was warm and humid compared to II b. However, in III a, there was no inflow of sediments due to irregular flooding, and in fact, soilization process was more manifested than during II b due to the impact of the desiccation environment. However, there were some mass movements from Bonghwang Mt. (a.s.l. 147m) caused by heavy rains and typhoon during III b (approximately 360 yrs B.P.), thus moving a large amount of debris (i.e. gravel), which resulted in sedimentation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.383-393
• /
• 2019

Objectives: The proportion of those working beyond 53 hours a week in 2018 has reached 16.8% of the total number of workers in the Republic of Korea (Statistics Korea, 2018). Although there are many studies that have dealt with the correlation of long working hours and increasing risk of work-related health problems, studies dealing with the factors impacting work-related health problems of workers according to their working hours are few. This study aims to ascertain factors impacting work-related health problems of workers based on their working hours through thorough research on their work environment. Methods: Necessary factors for this study were extracted from 'the 4th Korean Working Conditions Survey to analyze details on normal characteristics and work environments used for the study analysis, work hours, and health problems related to work. Results: The results are as follows: First, men showed a greater probability of exposure to work-related health problems than did women, especially in the 50s age group, which showed the highest potential for health problems from work among age groups. Second, service providers and sales professionals showed a higher probability of work-related health problems. Third, for the work environment, health problems at work related to vibration, noise, chemical and poison exposure, exhaustion, pain, standing position, and repeated motion showed a higher probability if the work hours are long. Conclusions: This study suggests that the minimization of overtime labor would prevent work-related health problems and diseases, improve the well-being of workers, and decrease the negative impact on workers in the subject area.

• Journal of dental hygiene science
• /
• v.21 no.3
• /
• pp.133-139
• /
• 2021

Background: Smoking in adolescence leads to an intensified addiction to nicotine when physical and mental growth has not yet been completed. With the advent of e-cigarettes, the rate of e-cigarette use among Korean adolescents has been steadily increasing. To date, studies on e-cigarettes and oral health, especially on the relationship between smoking styles and oral health in adolescents, are limited. Therefore, this study aimed to identify the risk factors for oral health problems caused by the repeated use of conventional cigarettes and e-cigarettes. Methods: This explanatory research study compared the adolescents' experiences of periodontal disease symptoms according to smoking type through a secondary analysis of the original data from the 15th Adolescent Health Behavior Survey (2019). Cross-analysis was performed to compare the smoking patterns according to the adolescents' general characteristics. Finally, a binary logistic regression analysis was performed to determine how smoking characteristics affect the adolescents' experience of periodontal disease symptoms. Results: In terms of patients' general characteristics, significant differences were observed in sex, school level, grades, household economic status, type of residence, and father's education level between adolescents who smoked conventional cigarettes alone and those who smoked both conventional cigarettes and e-cigarettes (p<0.05). After checking the factors affecting the smoking pattern and the experience of periodontal disease symptoms in adolescents, it was found that the duplicate smoking group was more likely to experience periodontal disease symptoms (odds ratio, 1.20) than the group that smoked conventional cigarettes alone (p<0.05). Conclusion: Duplicate smokers experienced more symptoms of periodontal disease than those who smoked cigarettes alone. Based on the findings of this study, smoking cessation counseling according to the smoking type and differentiated education for oral health promotion should be provided.

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.99-111
• /
• 2021

This study confirms whether interaction and satisfaction between educators and learners can be repeated as artistic activities in art education and compares online and offline differences. And it suggests ways to enhance the effectiveness of online art education. As a method of research, literature analysis shall be conducted on art education, educational and social interaction, satisfaction, and behavioral intent. Two surveys were conducted on online and offline education for music and art students who completed art education lectures. As a result, 89 online and 56 offline students participated. The higher the satisfaction level of educational and social interaction in art education, the more it led to artistic activities. Educational interaction in online art education was higher, social interaction was lower, and it was different from offline.