• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.163-170
• /
• 2005

Urban transit is a complex system that is combined electrically and mechanically, it is necessary to construct maintenance system for securing safety accompanying high-speed driving and maintaining promptly. Expert system is a computer program which uses numerical or non-numerical domain-specific knowledge to solve problems. In this research, we intend to develop the expert system which diagnose failure causes quickly and display measures. For the development of expert system, standardization of failure code classification system and creation of BOM(Bill Of Materials) have been first performed. Through the analysis of failure history and maintenance manuals, knowledge base has been constructed. Also, for retrieving the procedure of failure diagnosis and repair linking with the knowledge base, we have built RBR(Rule Based Reasoning) engine by pattern matching technique and CBR(Case Based Reasoning) engine by similarity search method. This system has been developed based on web to maximize the accessibility.

• Korean Journal of Materials Research
• /
• v.27 no.7
• /
• pp.374-380
• /
• 2017

Properties of coatings produced by warm spray were investigated in order to utilize this technique as a repair method for Al tire molds. $Al-(0-10%)Al_2O_3$ composite powder was sprayed on Al substrate by warm spraying, and the microstructure and mechanical properties of the composite coating layer were investigated. For comparative study, the properties of the coating produced by plasma spray, which is a relatively high-temperature spraying process, were also investigated. The composite coating layers produced by the two spray techniques exhibited significantly different morphology, perhaps due to their different process temperatures and velocities of particles. Whereas the $Al_2O_3$ particles in the warm sprayed coating layer maintained their initial shape before the spray, flattened and irregular shape $Al_2O_3$ particles were distributed in the plasma sprayed coating layer. The coating layer produced by warm spray showed significantly higher adhesive strength compared to that produced by plasma spray. Hardness was also higher in the warm sprayed coating layer compared to the plasma sprayed one. Moreover, with increasing the fraction of $Al_2O_3$, hardness gradually increased in both spray coating processes. In conclusion, an $Al-Al_2O_3$ composite coating layer with good mechanical properties was successfully produced by warm spray.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.644-646
• /
• 2009

A 5-year-old intact male black gibbon (Hylobates concolor) was referred for evaluation of the right pelvic limb lameness following a fight against other black gibbons. Fractures of the right tibia and fibula were suspected on physical examination and palpation of the right pelvic limb, but no other injuries or abnormalities were detected. While the black gibbon was sedated, pelvic limb radiographs were taken, which revealed diaphyseal oblique fractures of the right tibia and fibula. Open reduction of the fractures was performed. The tibial fracture was repaired by use of an internal fixation technique that included a tubular dynamic compression plate and cortical screws secured along the craniomedial aspect of the tibia. There were no complications during the postoperative rehabilitation period. At 9 weeks, radiographs revealed that bridging callus was well formed over the cortices of the tibial and fibular fracture area. The cast was removed 9 weeks after surgery. The black gibbon exhibited no evidence of lameness and was released back into the group. Presently, there are no published reports of internal fracture fixation in a black gibbon where a tubular dynamic compression plate and cortical screws provided excellent stabilization of the tibia and complete fracture healing allowing normal ambulation.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.793-803
• /
• 2000

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically self-curing glass-ionomer cement and light-curing glass-ionomer cement as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on maxillary third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were self-curing glassionomer cement and light-curing glassionomer cement. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. Results were as follows. 1. In all experiment group, there were not epithelial down growth and glass ionomer cement were encapsulated connective tissue. 2. In 4 weeks experiment I group slighly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, experiment groups I, II were encapsulated fine connective tissue. 4. Therefore glass-ionomer cement filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances were possible clinical methods and this technique is useful method for Maxillary furcation involvement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.345-348
• /
• 2008

Recently, demand is caused that new building environment of value added rising demand on the lines of becoming bigger, manhattanize of structure and becoming high standard of structure in a construction site and influx of advanced foreign nation technique. To satisfy these requirements for alternative, structures applied to the PSC, PC is increasing. Double Tee Slab is possible for long length structure and applied to the method of construction. When assembling Double Tee Slab produced by the factory in the field, becamed carry-out topping concrete in upper, but occurred crack to slab line. There is no structural problem to crack occurred in upper, waterproof in maintenance and repair of structure due to a conservative cause several problems.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.11-21
• /
• 2012

Purpose: Mulliken's method allows for normal nasal and lip growth, which in turn forms a natural shape of the philtrum. Therefore, we used a modified Mulliken's method to correct unilateral and bilateral cleft lip nasal deformities and followed the patients for 10 years. Methods: Ninety-one patients, who had undergone repair of unilateral and bilateral cleft lip and nasal deformity simultaneously using Mulliken's method during the time period from June 1997 to June 2009, were enrolled into this study. To follow-up of the growth of the lips and nose after the operation, the following 5 anthropometric measurements were analyzed: nasal tip protrusion, columellar length, upper lip height, cutaneous lip height, and vermilion mucosa height. Results: Using this method, we obtained a result that there was no significant difference in the development of the lip compared to the normal control group, and that the bilateral cleft lip patients' nasal projection and columellar length was shorter than that in normal persons. Both measures were statistically significant. Conclusion: Mulliken's method is a superb surgical technique, which enables the normal development of the nose and lip, which further allows for the innate philtrum appearance. The author's result does not seem to be meaningful, because the normal rate of nasal growth is slow before adolescence; however, we recommend additional follow-up and accordant treatment, if needed, once the nasal growth is complete.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.11.1-11.5
• /
• 2018

Background: Squamous cell carcinoma (SCC) is the most commonly occurring malignant tumor in the oral cavity. In South Korea, it occurs most frequently in the mandible, tongue, maxilla, buccal mucosa, other areas of the oral cavity, and lips. Radial forearm free flap (RFFF) is the most widely used reconstruction method for the buccal mucosal defect. The scar of the forearm donor, however, is highly visible and unsightly, and a secondary surgical site is needed when such technique is applied. For these reasons, buccal fat pad (BFP) flap has been commonly used for closing post-surgical excision sites since the recent decades because of its reliability, ease of harvest, and low complication rate. Case presentation: In the case reported herein, BFP flap was used to reconstruct a cheek mucosal defect after excision. The defect was completely covered by the BFP flap, without any complications. Conclusion: Discussed herein is the usefulness of BFP flap for the repair of the cheek mucosal defect. Also, further studies are needed to determine the possibility of using BFP flap when the defect is deep, and the maximum volume that can be harvested considering the changes in volume with age.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2002

The important issues of facility database management in GIS are to collect up-to-date information and to update information in accordance with new-establishment, repair and replacement of the facilities. Therefore, it is necessary to develop a system which has capability of monitoring facilities as well as managing database efficiently. The purpose of this study is to propose possibility of implementation of mobile GIS solution for the facility management. In order to achieve the goal, to process existing digital maps and to receive on-site information through the wireless communication service are required. In addition, the system is required to process spatial information obtained by GPS and digital photogrammetric technique with real-time updating database in server. The system increases efficiency both in work flow and monitoring for facility management by providing optimal routing information to the sites and real-time two-way communication using VoIP(Voice over Internet Protocol). The system is expected to perform real-time database management effectively. In consequence, the system could appropriately response on-site situations in various practical applications. The proposed technology could contribute to improve nation's leading-edge technology.

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.6
• /
• pp.463-472
• /
• 2020

Direct reprogramming, also known as a trans-differentiation, is a technique to allow mature cells to be converted into other types of cells without inducing a pluripotent stage. It has been suggested as a major strategy to acquire the desired type of cells in cell-based therapies to repair damaged tissues. Studies related to switching the fate of cells through epigenetic modification have been progressing and they can bypass safety issues raised by the virus-based transfection methods. In this study, a protocol was established to directly convert fully differentiated fibroblasts into diverse mesenchymal-lineage cells, such as osteoblasts, adipocytes, chondrocytes, and ectodermal cells, including neurons, by means of DNA demethylation, immediately followed by culturing in various differentiating media. First, 24 h exposure of 5-azacytidine (5-aza-CN), a well-characterized DNA methyl transferase inhibitor, to NIH-3T3 murine fibroblast cells induced the expression of stem-cell markers, that is, increasing cell plasticity. Next, 5-aza-CN treated fibroblasts were cultured in osteogenic, adipogenic, chondrogenic, and neurogenic media with or without bone morphogenetic protein 2 for a designated period. Differentiation of each desired type of cell was verified by quantitative reverse transcriptase-polymerase chain reaction/western blot assays for appropriate marker expression and by various staining methods, such as alkaline phosphatase/alizarin red S/oil red O/alcian blue. These proposed procedures allowed easier acquisition of the desired cells without any transgenic modification, using direct reprogramming technology, and thus may help make it more available in the clinical fields of regenerative medicine.

• Journal of Chest Surgery
• /
• v.40 no.6 s.275
• /
• pp.448-450
• /
• 2007

The mortality of left ventricular free wall rupture after acute myocardial infarction is high; however, subactue myocardial rupture can be diagnosed by echocardiogram and the use of the intraaortic balloon pump reduces the incidence of re-rupture. Bleeding from subacute myocardial rupture can be managed by employing fibrin glue and several patches. We report here on a case of successfully managed case of subactue left ventricular free wall rupture after acute myocardial infarction with using the sutureless technique and fibrin glue.