• 한국물환경학회지
• /
• 제21권1호
• /
• pp.34-39
• /
• 2005

The performance of elutriated acid fermentation with slurry-type piggery waste was investigated, especially to evaluate the effects of temperature and pre-treatment. In the first phase, the acid elutriation reactor with piggery waste after centrifugation operated at both mesophilic and thermophilic conditions to evaluate the effect of temperature. Solubilization yield($gVFAs/gSCOD_{prod.}$) and acidification rate($gVFAs/gSCOD_{prod.}$) in the thermophilic digestion were 0.45 and 0.55, which were higher than those of the mesophilic digestion, 0.25 and 0.45. In addition, the acid elutriation reactor at thermophilic temperature is more effective in removing e-coli. In the second phase, the acid elutriation reactor was fed with piggery waste before centrifugation. With piggery wastes before centrifugation, the solubilization yield and the acidificaton rate were 0.40 and 0.80, respectively, which were higher than the rates using piggery waste after centrifugation at both mesophilic and thermophilic conditions. The higher sludge volume reduction of 80% benefits sludge management. Furthermore, economical advantages can be achieved by removing the pre-treatment process, such as centrifugation. Consequently, the treatment with piggery waste before centrifugation proved to be effective. Also, the optimum temperature condition was estimated at mesophilic or thermophilic conditions, considering solubilization yields and acidification rates, though the system should be heated.

• 한국레이저가공학회지
• /
• 제13권1호
• /
• pp.11-15
• /
• 2010

Indium tin oxide (ITO) provides high electrical conductivity and transparency in the visible and near IR (infrared) wavelengths. Thus, it is widely used as a transparent electrode for the fabrication of liquid crystal displays (LCDs) and organic light emitting diode displays (OLRDs), photovoltaic devices, and other optical applications. Lasers have been used for removing coating on polymer substrate for flexible display and electronic industry. In selective removal of ITO layer, laser wavelength, pulse energy, scan speed, and the repetition rate of pulses determine conditions, which are efficient for removal of ITO coating without affecting properties of the polymer substrate. ITO coating removal with a laser is more environmentally friendly than other conventional etching methods. In this paper, pattering of ITO film from polymer substrates is described. The Yb:KGW femtosecond laser processing system with a pulse duration of 250fs, a wavelength of 1030nm and a repetition rate of 100kHz was used for removing ITO coating in air. We can remove the ITO coating using a scanner system with various pulse energies and scan speeds. We observed that the amount of debris is minimal through an optical and a confocal microscope, and femtosecond laser pulses with 1030nm wavelength are effective to remove ITO coating without the polymer substrate ablation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.113-118
• /
• 2007

Now a performance process of Demolition works is 'Before-Removal & After-Classification' method in Korea. This method is short of demolition time, but construction wastes contained substances lower recycling rate of construction, raise expenses of reclamation & treatment. Then the government has decided upon a positive 'Before-Classification & After-Removal' method, and substantially raise a recycling rate of construction wastes. Therefore, this study makes an investigation into state of internal and external demolition field through evaluating technological level, we make a proposal of dismantling method from there. Also, we put dismantling to the test in an apartment by proposed work process. As the result, it made a term of works increased for removing interior material. To solve this problem, we need to develop tools and methods of construction that can remove efficiently. From now on, we continuously need to study a breakdown system of dismantling, analysis of dismantling process and general system by inspecting entire demolition process. And we have to study details for making a specific thesis of method of removing interior material which was based on developing a suitable partial demolition machine and dismantling works.

• 한국조경학회지
• /
• 제32권3호
• /
• pp.43-50
• /
• 2004

This study looked into the water quality improvement effect of reed (Phragmites communis), bur reed (Sparaganium stoloniferum), Alisma canaliculatum, and Hydrocharis dubia in order to develop native hydrophytes suitable to natural-type wetlands for ecological restoration. The result confirms that the concentration of wastewater was lowered in most plants indicating a possibility in wastewater treatment. Among four species, reed (Phragmites communis) and bur reed (Sparaganium stoloniferum) were most effective in removing a majority of contaminants. Considering that reed (Phragmites communis) is a species that has been used most often among hydrophytes, bur reed (Sparaganium stoloniferum), which is a native species in Korea, showed equivalent level of outstanding effect. In the physiological and growing activity and its relations to water quality improvement effect, each species appeared differently. Reed (Phragmites communis) and bur reed (Sparaganium stoloniferum) were best also in physiological and growing activity. In the case of Hydrocharis dubia, growth was strong in polluted water environment but its physiological activity was poor, indicating that it was under stress. The growth and physiological activity of Alisma canaliculatum were also poor, indicating that it too is being stressed. However, measuring organic contents in the plants of each species shows that the organic contents of Alisma canaliculatum was high. Alisma canaliculatum is a species effective in removing pollutants in water, although it is under stress. A unique phenomenon in removing water pollution with plants is that each species removed different pollutants. In the case of Alisma canaliculatum, which was relatively poor in removing pollution, it was remarkable in reducing nitrogen and phosphorus. Hydrocharis dubia was also effective in eliminating floating matter.

• Journal of Microbiology and Biotechnology
• /
• 제13권2호
• /
• pp.217-224
• /
• 2003

Previously, we developed a CHO cell line (CHO-OTC1-Al9) that expresses the first two enzymes in the urea cycle and exhibits a higher ammonia-removing ability and faster growth rate than a vector-controlled CHO cell line (CHO-neo-5). The current study was undertaken to develop a cell line with an ammonia-removing ability higher than the cell line developed previously. To accomplish this, CHO cell lines expressing the first three, first four, or all five enzymes of the urea cycle were constructed using a stable transfection method. Finally, the CHO-AS-16, CHO-AL-19, and CHO-Arg-11 cell lines expressing the first three, first four, and all five enzymes of the urea cycle, respectively, were selected and found to exhibit higher ammonia-removing ability than the CHO-OTC1-Al9 cell line. Among the three selected cell lines, CHO-AL-19 showed the highest ammonia-removing ability and highest cell viability at a higher cell density, with 40% and 15% lower ammonia concentration in the, culture media than that of CHO-neo-5 and CHO-OTC1-A19 cell lines, respectively. CHO-AL-19 also showed 44% and 10% higher cell viability than the CHO-neo-5 and CHO-OTC-Al9 cell lines, at a higher cell density, respectively. The ammonia concentrations in the culture media were expressed as the ammonia concentration/cell, and the CHO-AL-19 cells revealed 45-60% and 20% lower ammonia concentration/cell than the CHO-neo-5 and CHO-OTC1-Al9 cells, respectively.

• 환경위생공학
• /
• 제14권1호
• /
• pp.80-87
• /
• 1999

According to the fact that algae, which is usually used as a biosorbent, contains chlorophyll, we used the chlorophyll as an adsorbent. In this study, chlorophyll is immobilized by agar, which was made of platan, oak, ginkgo and pine. We investigated the removing capacity of biosorbents to toxic heavy metals (Pb, CU, Cd, Zn) in the single ion solution. Then the experimental parameters were pH, reaction time and concentration of heavy metal ions.The optimum conditions for the adsorption of heavy metals were as follows : pH range was 4~5, reaction time was 40mon, and the highest ratio of the removing rate was 50~70 ppm. The order of the amount of Pb, Cu and Cd removed was specified as oak > ginkgo > pine > platan in these conditions and as pine > ginkgo > oak > platan at Zn. Fro the results of the desorption experiments, we found that the heavy metal with the highest ratio of desorption in the single ion adsorbent was Cu.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.406-409
• /
• 1997

An economical 4-axis CNC controller employing step motors is designed and implemented in this paper. By using the inherent ability of holding position of the motor, the CNC controller uses open-loop control for removing trajectory error and for a simple hardware. Each drive of axis has an 8-bit microprocessor 89C52 and a PC controls the axes and pendant by means of RS232C serial communication. Backlash is also compensated at the axis controller. While compensating the backlash, the feed rate becomes zero in order to minimize trajectory error. The trajectories of 16ms interval are computed on PC and are sent to motor drives. In the drives, the trajectories are linearly interpolated for 2ms interval. The developed CNC does not require add-on specific motion card on PC. From the experimental results, the validity of the CNC controller based on step motor is proved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1416-1417
• /
• 2007

The high frequency pulsed power system is widely available for use in high frequency generator applications. We designed and fabricated our own high frequency pulsed power system to obtain very sort pulse width and high peak value and investigated microbe removal characteristics using it. This paper introduces a simple high voltage high frequency pulsed power system for removing various bacteria caused by dirty water. This system include power supply circuit, switching MOSFET, and flyback converter. We can also control the switching using a PIC one chip microprocessor. As a result, we can obtain good removing characteristics of various bacteria by adjusting the charging voltage, the pulse repetition rate and the electrical field inducing time.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.401-411
• /
• 1990

Deposition of diamond films on Si(100) from the mixtures of methane and hydrogen were investigated using hot W filament CVD method. The nucleation density could be increased thousandfold by surface treatment with SiC powder. Upon oxygen addition to the mixture, crystal facets became developed more clearly by selectively removing non-diamond carbons, but the film growth rate generally decreased. However, at a very high methane content(e.g. 10%), a small amount of oxygen addition has resulted in an increase in the film deposition rate presumably by promotion of methane decomposition. When the gas pressure was varied, the growth rate exhibited a maxiumum at around 20torr and the film crystallinity steadily improved with the pressure increase. The observed variation of the growth rate by oxygen addition was discussed in terms of its role in the pyrolysis and the subsequent gas phase reactions.

• 한국통신학회논문지
• /
• 제32권1A호
• /
• pp.83-90
• /
• 2007

본 논문에서는 ISO/IEC 18000-6C 표준안을 만족하는 UHF대역 RFID 수신단(리더)의 지터(Jitter)처리와 글리치제거 알고리듬 및 설계방안을 제안하고 이를 이용한 리더를 구현하여 실제 TI(Texas instrument) Gen2 태그의 응답을 분석하였다. ISO/IEC 18000-6C표준안은 Reader에서 Tag로 데이터 전송 시 +/-1%의 오차와 Tag에서 Reader로 데이터 전송 시 최대 +/-22%의 오차를 허용하도록 정의하고 있다. 이러한 허용오차범위 내의 데이터에 대해 본 논문에서 제시한 회로는 기존의 PLL(DPLL, ADPLL)을 이용한 방식이 아닌 최대허용치(tolerance)와 허용치누적을 이용하여 일정치의 오차범위를 허용하며 디코딩 하도록 설계하였다. 또한 글리치와 지터제거 알고리듬의 기본원리를 동일하게 구성하여 글리치제거와 지터제거를 따로 구분하지 않고 하나의 기능으로 동작하게 한다. 주 클럭은 19.2MHz로 설정하였으며 LF는 국내 전파법에 맞도록 40kHz로 설정하였다 시뮬레이션결과 15%이하의 위상지터를 가진 입력데이터에 대해 판독에러율은 0이었으며 $15%{\sim}22%$ 위상지터를 가진 입력데이터에 대해서 는 0.000589였다. 그러나 동적LF생성회로를 사용한 결과 $15%{\sim}22%$ 위상변화를 가진 입력데이터에 대해 판독에러율은 0이었으며 표준안에 정의된 최대 +/-22%오차 범위내의 지터 발생에 대해서 판독에러율은 0이었다.