• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.142-153
• /
• 2011

'Silla Monument Stone in Jungseong-ri, Pohang' was discovered in Pohang City, Gyeongsangbuk Province of Korea in 2009. The monument stone with irregular shape has dimensions of maximum height of 105cm, width of 47.6~49.6cm, thickness of 13.8~14.7cm and weight of 115kg. The results of monument stone was found to be granitite. Conservation treatment procedure was carried out in the order of production of Weathering map, cleaning of surface pollutants, consolidation using ethyl silicate. Black pollutant(crust) that covered more than 60% of the surface was analyzed first in order to remove the pollutants on the surface of the monumental stone by cleaning of surface pollutants using laser. The purpose on analysis was not only to verify the pollutants on the stone but also to carry out preliminary cleaning by securing rocks with same pollutant as the monumental stone. As the results of analysis using p-XRF(PMI. INNOV-X, USA) on the site, high level of Mn and Fe were detected, and the analysis of small section that had been fallen off with SEM/EDX for the purpose of quantitative analysis also detected high level of Mn. The Similar contaminants on Stone secured in the manner described above were made into 10 samples ($5cm{\times}5cm$) and was subjected to preliminary cleaning by Nd-YAG Laser(Laser&Physics, Korea). The results of surface observation through portable microscope during cleaning revealed that the power of 460mJ, wavelength of 1064nm and irradiation frequency of 1,800~2,300 per $25cm^2$ were most effective. Evaluation on the preservative treatment was made through confirmation of the extent of removal through color-difference meter measurement and component analysis prior to and following removal of the pollutants. As the result of color-difference meter measurement increase in the brightness was evidenced by the increase in the brightness ($L^*$)value from 33 to 49, and it was possible to ascertain the reduction in the pollutants as the content of Mn was reduced by about 80% from $50,000{\pm}5,000ppm$ to $10,000{\pm}2,000pmm$ from the result of component analysis.

• Clean Technology
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2023

Due to water shortages caused by water pollution and climate change, total organic carbon (TOC) standards have been implemented for wastewater discharged from public sewage treatment facilities. Furthermore, there is a growing interest and body of research pertaining to the reuse of sewage treatment water as a secure alternative water resource. The membrane bio-reactor (MBR) method is commonly used for advanced wastewater treatment because it can remove organic and inorganic ions and it does not require or emit any chemicals. However, the MBR process uses a separation membrane (MF), which requires frequent film cleaning due to fouling caused by a high concentration of mixed liquor suspended solid (MLSS). In this study, process improvement and microbubble cleaning efficiency were evaluated to improve the differential pressure, water flow, and MF fouling, which are the biggest disadvantages of operating the MF. The existing MBR method was improved by installing a precipitation tank between the air tank and the MBR tank in which raw water was introduced. Microbubbles were injected into a separation membrane tank into which the supernatant water from the precipitation tank was introduced. The microbubble generator was operated with a 15 day on, 15 day off cycle for 5 months to collect discharged water samples (4L) and measure TOC. As the supernatant water from the precipitation tank flowed into the separation membrane tank, about 95% of the supernatant water MLSS was removed so the MF fouling from biological contamination was prevented. Due to the application of microbubbles to supernatant water from the precipitation tank, the differential pressure of the separation membrane tank decreased by 1.6 to 2.3 times and the water flow increased by 1.4 times. Applying microbubbles increased the TOC removal rate by more than 58%. This study showed that separately operating the air tank and the separation membrane tank can reduce fouling, and suggested that applying additional microbubbles could improve the differential pressure, water flow, and fouling to provide a more efficient advanced treatment method.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.337-343
• /
• 2020

This study was carried out to evaluate the yield of cuttings according to the planting and runner releasing times of mother plants in order to raise the cutting seedlings of raising seedling period 75 days or more needed for forcing culture of strawberries to be transplanted into the field around the 15^th of September. Three domestic cultivars of 'Maehyang', 'Jukhyang', and 'Kuemsil' were tested. For experiment 1 to determine the yield of cuttings with the change of transplanting time, the mother plant were planted on February 28, March 20, and April 9 in 20 days intervals, and the cuttings were collected two to three times from June 4 to July 1. Experiment 2 was conducted to investigate the yield of cuttings depending on the runner releasing time, the runners were released in three intervals of 20 days, 40 days, and 60 days after planting the mother plant on March 5, and the cutting were collected once to three times from May 29 to June 26. From the comparisons of cutting yield according to the transplanting time of mother plants, February 28 treatment was more 9~25% and 114~165% for each cultivar than March 20 and April 9, respectively (Experiment 1). The yield of cuttings with releasing time 20 days after planting the mother plants had higher by 60~77% and 104~176% for each cultivar than 40 days and 60 days, respectively (Experiment 2). From these results, in case of propagating the seedlings from cuttings needed for field planting around September 15, early planting around in the latter part of February is the best for cuttings yield. In addition, releasing after the removal of the runners produced from mother plants by 20 days after planting gives an advantage over higher yield of cuttings. Consequently, this study suggest to apply an efficient raising seedling system for labor saving and quality improvement in raising seedlings of three strawberry cultivars in Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.4
• /
• pp.352-362
• /
• 1985

In succession to the previous paper, the present study was directed to investigate the optimal processing conditions of meat paste products with mackerel. To improve the gel forming ability of meat paste, washing conditions with water and alkaline solution, setting time and temperature, and heating temperature were controlled, and the influences of the freshness of raw mackerel and mixing ratios of ordinary and dark muscle on the qualities of meat paste products were discussed. The most effective condition for the keeping freshness of raw mackerel meat among different storage conditions was the forozen storage at $-20^{\circ}C$, followed by the storage at $-3^{\circ}C$ and ice storages, and this relation was coincided with the effect for maintaining of gel forming ability among above conditions, but there was no effect on keeping freshness of raw mackerel in the storage at $25^{\circ}C$. Gel strength of meat washed with tap water decreased with washing time, particularly, the meat washed three times showed higher gel strength than the meat washed more than 5 times. And the removal ratios of water soluble protein were $60\%$ in the meat washed three times and $90\%$ in the meat washed nine times. Washing effect of raw mackerel meat with alkaline solution was great at pH $6.5{\sim}7.0$ of meat paste yielding the highest gel strength in the meat washed with $0.5\%$ sodium bicarbonate solution. Gel strength of meat paste product decreased with the increase of mixing ratios of ordinary and dark muscle in the raw meat. In the setting conditions of meat paste examined, 15 hours at $5^{\circ}C$ and 2 hours at $30^{\circ}C$. The most suitable temperature for gel forming in heating conditions was $90^{\circ}C$, fellowed by $100^{\circ}C\;and\;80^{\circ}C$.

• Journal of Life Science
• /
• v.27 no.5
• /
• pp.575-578
• /
• 2017

Here we describe the histological lesion of a viral fibro-papilloma in a hedgehog. After surgical removal from maxilla, the solitary swollen mass was round to oval, yellowish with rough surface and measuring $6{\times}3{\times}2mm$ approximately. The tumor mass was submitted to the laboratory of pathology, college of veterinary medicine, Kyungpook National University for pathological diagnosis. Pathological examination of the tumor was established, the tumor was described grossly and sample was trimmed, sectioned and routinely prepared for histopathological evaluation. The tumor mass was diagnosed as viral fibro-papilloma, as the histological picture showed characteristic features of warts caused by papillomaviruses. The tumor characterized by thickening of the stratum spinosum (acanthosis) and basale, koilocytosis, intra-nuclear inclusion bodies in keratinocytes and fibrosis of submucosa. Further, viral inclusion bodies were demonstrated by Machiavello stain giving red color to the nuclei. No lymphocytes that responsible for regression of the wart could be detected, suggesting the poor possibility of spontaneous regression of the tumor. Papillomatosis is a disease of young animals, but in our case the infected Hedgehog was 5 years old, that maybe due to an impaired immune system, which is also shown by absence of lymphocytes. To the best knowledge of the author, this case presents the first report of viral fibropapillomatosis in Hedgehog.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.1-15
• /
• 1983

This paper has concentrated on estimating the possibility and mathematical analysis for the application of BFB to the treatment of nightsoil with low dilution rate. The experiment for the study of this purpose was conducted by continuous type reactor at $20^{\circ}C$, varying F/M ratio from 0.12 to 0.37 and dilution ratio from 2 to 10, and in it provided matted reticulated polypropylene sheets for the solid supports. The obtained results showed that the application of BFB to the treatment of nightsoil would be more effective than any other biological treatment process. Also, it has observed that the optimum dilution ratio was about 5 times and the optimum HRT was about 17 hours, and then it was estimated that the reactor volume and the quantity of weak water could be reduced to the extent of 70 percent and 80 percent. The experimental results of BFB could be analysed by the mathematical models applied to complete mixing activated sludge process. The substrate removal rates which were obtained by McKinney's($K_m$) and EcKenfelder's($K_e$) equation was 1.784/hr and $2.0{\times}10l/mg{\cdot}day$, and substrate was removed very rapidly compared to those of conventional type biological treatment processes. The biomass yield coefficient($a_5$), the endogeneous respiration rate(b), the synthesis oxygen demand rate($a{_5}^{\prime}$), and the endogeneous respiration oxygen demand rate(b') were 0.349, 0.0237/day, 0.495 and 0.0336, respectively.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1999.06a
• /
• pp.97-117
• /
• 1999

This study was performed to investigate the effect of pork on the cadmium detoxification in rats. Ninety male Sprague-Dawley rats weighing $125.3{\pm}1.4g$ were divided into five groups based on cadmium treatment(0, 25, 50, 100, 250ppm) and five levels of Cd in AIN-76 purified diet had been fed for 8 weeks. Cadmium was supplemented with a form of $CdCl_2$.. During following 8 weeks of intoxication, casein was replaced by pork and the effect of pork on cadmium- detoxification was compared with casein. After 8 weeks of Cd intake had resulted in apparent cadmium intoxication; reduced growth rate, enlarged kidney and testis, decreased hematocrit value and hemoglobin content in response to the supplemented Cd levels in the diets. Discontinuing cadmium feeding, the body weights were relieved. Pork-fed groups seemed to have higher body weight than casein-fed groups. Hemoglobin content and hematocrit value became normal range at detoxification stage. The weights of liver, kidney, and testis were decreased along with cadmium intake. However, organ weight ratio was not affected by cadmium. Cadmium accumulation in liver and kidney showed a tendency to increase in the cadmium-exposed groups. The levels of metallothionein were also significantly elevated in the tissues of liver in response to the levels of Cd supplemented(p<0.05). Cadmium concentration in kidney was two times higher than that in liver. Cadmium removal rate of liver was higher than that of kidney. Cadmium accumulation of the pork-fed group was lower than that of casein. Especially, the factors which affected the cadmium contents in kidney were $Cd^{***}$ and $Cd{\times}pork^{***}$. Metallothionein(MT) was increased with cadmium, and MT was not likely to be affected by pork. Based on the findings from gross lesion, rats fed 250ppm of Cd were externally emaciated, had exposed penis and observed atrophies of kidney and testis. Histopathological observation seemed that the liver of groups feeding Cd supplemented diets showed cellular degeneration and accumulation of eosinophilic materials in the capillaries. In kidney, rats fed Cd diets had shown tubular epithelium degeneration and lesions of basophilic materials, while testis were weakened in numbers of spermatid and sporadically enlarged of giant cells. But the rats administered cadmium-detoxified diet supplemented pork for 7 weeks were shown individually decreased lesions compared with the rats supplied with casein diet.

• Clean Technology
• /
• v.22 no.2
• /
• pp.122-131
• /
• 2016

Caesium radioisotopes, ¹³⁴Cs and ¹³⁷Cs which come from the atmospheric nuclear tests and discharges from nuclear power plants, are very important to study artificial radioactivity. In this work, in order to lower the minimum detection activity (MDA) we investigated environmental radioactivity according to the Environment Measurement Laboratory procedure by ¹³⁷Cs and ¹³⁴Cs which is similar to chemical and environmental behaviors of ¹³⁷Cs. The environmental soils in high mountain areas near nuclear power plant were collected, and an Ammonium Molybdophosphate (AMP) precipitation method, which showed high selectivity toward Cs⁺ ions, was applied to chemically extract and concentrate Caesium radioisotopes. Radioactivity was estimated by a gamma-ray spectrometry. In gamma energy spectrum, with an increasing of ⁴⁰K radioactivity, it increased the MDA of ¹³⁴Cs and ¹³⁷Cs. Therefore, if the natural radionuclides were removed from the soil samples, the MDA of Caesium may be reduced, and the contents of ¹³⁷Cs of in the environmental soils can effectively be estimated. In the standard soil sample of Korea Institute of Nuclear Safety, radioactivity of ⁴⁰K was removed more than 84% on average, and the MDA of ¹³⁴Cs was reduced 2 times. The content of ¹³⁷Cs was recovered over 84%. On the other hand, in environmental soils, AMP precipitation method showed removal ratio of ⁴⁰K up to 180 times, which reduced the MDA about 5 times smaller than those of Direct method. ¹³⁷Cs recovery ratio showed from 54.54% to 70.06%. When considering the MDA and recovery ratio, AMP precipitation method is effective for detection of Caesium radioisotopes in low concentration.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.2
• /
• pp.391-400
• /
• 1997

Background : Bronchoscopy is an essential procedure for identifying the bleeding site and evaluating cause of hemoptysis. However, it is controversial regarding to the timing of bronchoscopy in patients with hemoptysis. Early bronchoscopy, which was performed during hemoptysis or with 48hour after cessation of bleeding, was better for identifying the site of bleeding compared with delayed bronchoscopy, which was performed 48 hours after cessation of bleeding. The diagnostic yield of identifying the bleeding site by bronchoscopy was variable in reported literature and the safety of early bronchoscopy was not mentioned in previous literature. Therefore, we evaluated the efficacy and safety of early bronchoscopy in patients with hemoptysis. Method : From October 1994 to August 1996 in Samsung Medical Center, bronchoscopy was performed in patients with hemoptysis. Early bronchoscopy was performed prospectively during hemoptysis or within 48 hours after cessation of bleeding from May 1995 to August 1996. Delayed bronchoscopy group included patients who did not received early bronchoscopy at the same period or in whom bronchoscopy was performed 48 hour after cessation of bleeding from October 1994 to May 1995. Results : Early bronchoscopy group was performed 73 times in 71 patients. Delayed bronchoscopy was performed in 57 times in 55 patients. There was no difference as to amount and underlying cause of hemoptysis between both groups. Indentification of bleeding site by visualizing active bleeding was significantly higher in early bronchoscopy (38.3%) than delayed bronchoscopy group (8.7%)(p < 0.05). Indentification of bleeding site by bleeding after clot removal was 8 in early and 10 in delayed bronchoscopy. Indentification of bleeding site by visualizing active bleeding and bleeding after clot removal was 36 in early and 15 patients in delayed bronchoscopy(p > 0.05). Causes of hemoptysis was found in 18 patients in early and 16 patients in delayed bronchoscopy group. patients who had early bronchoscopy underwent surgery. We diagnosed the site of bleeding in 4 patients preoperatively. In 3 patients we made a treatment plan promptly right after bronchoscopy. Among early bronchoscopy group, bleeding over 100cc during bronchoscopy occurred in 2 patients. In early bronchoscopy group there was no other major complication during bronchoscopy. Conclusion : In patients with hemoptysis, early bronchoscopy which performed within 48 hours after cessation of bleeding was more effective procedure for identifying the bleeding site than delayed bronchoscopy which was performed after 48 hour cessation of bleeding.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.413-419
• /
• 2011

Nanoscale zero-valent iron (NZVI) particles were tested as remediation media for groundwater contaminated by organic pollutants (e.g., TCE, trichloroethylene). The contaminated groundwater contained anions ($NO_3^-$, $Cl^-$, $SO_4^{2-}$, and $HCO_3^-$) and natural organic matter (NOM). Treatability of commercial NZVI particles (NANOFER 25, Nanoiron, Czech) was tested by using a synthetic groundwater and the field groundwater samples. More than 95% of 1.8 mM TCE was removed within 20 hours with a NZVI dosage of 25 g/L ($k=0.15hr^{-1}$). Repetitive degradation experiments revealed that the removal capacity of NANOFER 25 was 0.19 mmole TCE/g NZVI. TCE degradation reactions were not substantially affected by the presence of each anion with concentrations as high as 100 times the average field concentrations. However, when the four anions ($NO_3^-$, $Cl^-$, $SO_4^{2-}$, $HCO_3^-$) were present simultaneously. the degradation reactivity and removal capacity were decreased by 60% ($k=0.069hr^{-1}$) and 10%, respectively. The k value of TCE degradation in the presence of NZVI (25 g/L) with dissovled organic carbon of 2.5 mg/L was also decreased by 84% ($k=0.025hr^{-1}$). In the experiments with the field groundwater, more than 90% of $1.8{\mu}M$ TCE, which is the concentration of TCE at the source zone, was removed within 10 hours with a NANOFER 25 dosage of 25 g/L. The results imply that the contaminated groundwater can effectively be treated by NANOFER 25 with more information on the hydrogeology of the site.