• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.551-558
• /
• 2021

In this paper, we made the integrated intelligent air ventilation of the actuator module that can be remotely controlled based on IoT and sensors. we implemented a ventilation window system by configuring an algorithm design and a driving circuit to control the operation of the actuator to open and close the ventilation port based on a predetermined number of data that detects indoor gas/CO2/humidity temperature and outdoor fine dust related indoor/outdoor environment. It is difficult to store, manage, and analyze data due to the large number of sensors and conditions for the transmission data of indoor air circulation module. The remote monitoring and remote wireless control screens were constructed to automate the separation and operation conditions by extracting and managing the state. We apply MQTT to enhance big data transmission and construct the system using Rocket MQ to ensure safe transmission of operational big data against system errors.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.41-43
• /
• 2011

Cyber-Physical Systems are tight integration of computation, networking and physical objects to sense, monitor, and control the physical world. This paper presents a novel architecture that combines two next generation technologies i.e. cyber-physical systems and Cloud computing to develop a ubiquitous healthcare based infrastructure. Through this infrastructure, patients and elderly people get remote assistance, monitoring of their health conditions and medication while living in proximity of home. Consequently, this leads to major cost savings. However, there are various challenges that need to be overcome before building such systems. These challenges include making system real-time responsive, reliability, stability and privacy. Therefore, in this paper, we propose an architecture that deals with these challenges.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2590-2593
• /
• 1999

This paper describes the development of Emergency Generator Equipments Diagnosis System for monitoring generator equipments and battery system. This system is capable of measuring on up to 20 separate sites of generator, engine and periphral equipment's. Battery system also capable of measure the setting time, float and discharge voltage of up to 240 cells in a single installation, and has the memory capacity to store battery's alarm data information on up to 200 separate sites. This system are easy to maintain and attain cost effectively, so that prepared for meeting the customer's service needs immediately. The system is additionally programmed with a each model, that will enable to accurately determine the generator equipments and remain battery capacity in a system following a short discharge test. It is also equipped with remote interrogation and control facilities.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.328-333
• /
• 2011

A Distribution Automation System (DAS) is operated by monitoring and control of the field statesusing Feeder Remote Terminal Units (FRTUs) installed together withautomatic switches.An optimal placement of automatic switchescan enhanceefficiencyof the operation and restoration, and improve the power supply reliability ofa DAS.This paper proposes an algorithm to decide the optimal placement of automatic switches ina DAS.The proposed algorithm was developed ona DAS witha six sections and three links configuration. The proposed algorithm was provided inaneight-feeder power distribution system.

• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.905-914
• /
• 2005

This paper suggests a healthcare home service system based on the distributed object group framework that can not only provide healthcare application services using the information obtained from the physical healthcare sensors and devices, and but also monitor and control these services remotely. The distributed object group framework supports the object group service, the interaction service between object groups and the real-time service in order to execute the healthcare application. Here object group means the unit of logical grouped objects or healthcare sensors and devices for a service. Our suggested system consists of 3 layers. The first layer presents the physical sensors and devices for healthcare, as a physical layer. The second layer lays the distributed object group framework, and the third layer, the upper's one, implements healthcare applications based on lower layers. With healthcare applications providing for this system, we implemented the location tracking service, the health information service and the titrating environment service. Also the integrated executing results of these services can be monitored and controlled via remote desktop systems or PDAs.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.593-596
• /
• 2005

The MSC is a remote sensing instrument with very high performance that is to be installed on KOMPSAT2 satellite. The MSC consists of EOS (Electro-Optic Subsystem), PMU (Payload Management Unit) and PDTS (Payload Data Transmission Subsystem). PMU controls and monitors all the other payload units by sending commands and collecting telemetry. PMU is in charge of interfacing between payload system and satellite bus system. PMU gets commands from ground-station via OBC (On-Board Computer) that is a main controller of the satellite bus system and sends telemetry to the ground-station via OBC. There is a processor module, called SBC (Single Board Computer) in the PMU. The SBC is a main controller of the MSC system. The main roles of the SBC are payload mission management, command validation and execution, telemetry collection and monitoring, ancillary data handling, event reporting, power control of payload sub-units and communication with these units. Intel's 80486DX2 processor has been used for the SBC. Due to the fact that the SBC plays important roles for imaging mission execution and handles a lot of control data that is required for payload operation, it is required to make analysis of the CPU load when it is in maximum operation mode. In this paper, the analysis and measurement results of the SBC throughput in the maximum operation mode.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.181-184
• /
• 2008

The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study sequentially utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using DTM and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

• Journal of Information Processing Systems
• /
• v.20 no.2
• /
• pp.173-184
• /
• 2024

The connected car services are one of the most widely used services in the Internet of Things environment, and they provide numerous services to existing vehicles by connecting them through networks inside and outside the vehicle. However, although vehicle manufacturers are developing services considering the means to secure the connected car services, concerns about the security of the connected car services are growing due to the increasing number of attack cases. In this study, we reviewed the research related to the connected car services that have been announced so far, and we identified the threats that may exist in the connected car services through security threat modeling to improve the fundamental security level of the connected car services. As a result of performing the test to the applications for connected car services developed by four manufacturers, we found that all four companies' applications excessively requested unnecessary permissions for application operation, and the apps did not obfuscate the source code. Additionally, we found that there were still vulnerabilities in application items such as exposing error messages and debugging information.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.19-25
• /
• 2011

With the issue of a Green IT Technology, studies on a environment-friendly luminous source that can reduce Carbon discharge and increase energy efficiency are actively progressed all over the world. Especially, with the problems of high oil price and environmental pollution, LED has made a great attention as a new luminous source that can replace the existing incandescent bulbs and fluorescent lights. In this paper, the proposed streetlight system becomes more intellectual by combining the low power consuming, high efficient, and high luminous LED module with a complex sensor module with temperature, humidity, illumination and motion sensors. Then, we design and implement the Ad-Hoc based LED-IT-Sensor integrated streetlight system that can maximize the energy savings efficiently with central monitoring system and selective remote dimming control by connecting them to the wireless ubiquitous sensor network(USN) using a Zigbee module.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.629-631
• /
• 2015

Recently, the actual demand for electricity usage to out of demand forecasting demand appears to be based on the power of Government to address the insecurity is there are a lot of efforts on a more efficient energy management. In 2011, the first major outage, blackout since the current rate of no more than 10% of our power plants, such as power supply and demand crisis is being repeated. In addition, energy management systems, the demand for care and social areas are being expanded. In this paper, Building power supply and wired/wireless router and to optimize the DDNS (Dynamic Domain Name Service) for remote control and monitoring device for electric consumption Presonal Energy Management System offers a way to implement it. In the future, remote control and access the user's can minimize the settings for additional research is needed.