• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.197-200
• /
• 2002

This paper is about a system development which control and monitor a PLC of the remote-distance through the Internet using the web-browser. In general, the PLC uses its own communication protocol of PLC Manufacture. It is actually impossible to be used through the Internet, because the PLC communication protocol is basically developed to be suitable for short-distance. Therefore, what we need is a transformation system which can convert the PLC communication protocol into the form which can connect to the Internet. In that sense, this paper is that about remote-control method through the WWW ( World Wide Web ). This system have three characteristics. First, it is possible to connect the Internet directly irrespective of CPU, Operating system and browser. Second, it is easy for user to access and treat. Third, it needs only HTML to operate without java or plug-in expansion. In this paper, we will introduce the monitoring and control system of PLC on the Linux with the Apache web-server.

• Journal of Drive and Control
• /
• v.10 no.2
• /
• pp.7-12
• /
• 2013

In this study, a wire/wireless communication system transmitting the operation data of engine from the ER (Engine Room) to the engine controller of ECR(Engine Control Room) has been developed through the communication of ISM(Industrial Science Medical) Band for the test operation environment improvement of medium speed engine. This wire/wireless communication system is composed of the RTU (Remote Terminal Unit) gathering and transmitting engine data as well as the MCU (Master Control Unit) receiving engine status information from the RTU to be sent to the engine controller (PLC). Through this study, a trial product of RTU and MCU has been manufactured. A test bench that has made temperature, pressure and pick-up sensor into a module for the local test of prototype was produced a test bench. In addition, at the same time save the data to a Web server and the smart phone real-time monitoring system has been developed using Wi-Fi communications. The ultimate objective of this study is to develop a wireless smart phone monitoring system of engine for the operator of engine to be able to monitor and control engine status even from the outside of engine room and control room based on this study.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2693-2695
• /
• 2005

In this paper, we developed a more efficient system for the remote control and monitoring of a wheeled mobile robot using internet without spatial limitation. The hardware configuration of the remote control system for a wheeled mobile robot includes a client PC executed on the remote site, a embedded web-server and a mobile robot with many measuring equipments. The communication between a client PC and a embedded web-server is implemented through internet. And the Bluetooth module is used for connecting a embedded web-server and a mobile robot. A GUI program has been developed by using JavaScript in order to easily control a mobile robot on a client PC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.132-137
• /
• 2004

On-Board Diagnostic(OBD) systems are in most cars and light trucks on the load today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. The CARB's diagnostic requirements to meet EPA emission standards have been designated as OBD with a goal of monitoring all of the emissions-related components, as well as the chassis, body, accessory devices and the diagnostic control network of the vehicle for proper operation. In this paper, we present a remote measurement system for the wireless monitoring of diagnosis signal and sensors output signals of ECU adopted KWP2000, united the OBD communication protocol, on OBD-compliant vehicle using the wirless communication technique of Bluetooth. In order to measure the ECU signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3C3410X is used for communicating ECU signals. The embedded system's software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on MicroC/OS kernel to communicate between bluetooth modules using bluetooth stack. The diagnostic system is developed using Visual C++ MFC and protocol stack of bluetooth for Windows environment. The self-diagnosis and sensor output signals of ECU is able to monitor using PC with bluetooth board connected in serial port of PC. The algorithms for measuring the ECU sensor output and self-diagnostic signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of self-diagnosis and sensor signals of ECU adopted KWP2000 in embedded system verified through the developed systems and algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1349-1354
• /
• 2021

An All-in-one LED lantern is a light device to determine the fairway of ships in operation. The current all-in-one LED lantern powered by solar energy is challenged by insufficient power capacity due to limited sun hours. This article presents an all-in-one 9-Nautical mile LED lantern driven by solar and wind power that is abundant maritime renewable energy. Furthermore, the remote smart monitoring system is developed. A smart control system capable of remote control of the lantern was implemented by using the LED lantern device and monitoring system as IoT. This technology that realtime condition monitoring and remote control are developed for safe ship navigation. We expect that maintaining the accuracy and consistency of LED lanterns prevents marine accidents and reduces social costs.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.359-364
• /
• 2006

This article describes the useful way to measure the torque and RPM of the geared motor. For this we have made the planetary geared reduction motor including 2 Hall sensors in it and the monitoring system. The monitoring system displays the sensing values (torque, rpm) and the calculated value (power) and it also has the network capability using the Bluetooth protocol. We will show that our solution is much more inexpensive and simple method to measure torque and rpm than before.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2686-2692
• /
• 2013

In this paper, various growth environment data collecting and monitoring based on wireless sensor network for greenhouse environmental monitoring system is designed and implemented. In addition, greenhouse control system is proposed to integrated control and management in internal environment and greenhouse facilities. The system provides real-time remote greenhouse integrated management service which collects greenhouse environment information and controls greenhouse facilities based on wireless sensor network. Graphical user interface for an integrated management system is designed based on the HMI and the experimental results show that the sensor data were collected by integrated management in real-time.

• International Journal of Advanced Culture Technology
• /
• v.4 no.3
• /
• pp.13-19
• /
• 2016

The growth of mobile devices in Internet of Things (IoT) leads to a number of remote and controlling system related IoT applications. For instance, home automation controlling system uses client system such web apps on smartphone or web service to access the home server by sending control commands. The home server receives the command, then controls for instance the light system. The web service gateway responsible for handling clients' requests attests an internet latency when an increasing number of end users requests submit toward it. Therefore, this web service gateway fails to detect several commands, slows down predefined actions which should be performed without human intervention. In this paper, we investigate the performance of a web server-side platgorm based event-driven, non-blocking approach called Node.js against traditional thread-based server side approach to handle a large number of client requests simultaneously for remote and controlling system in IoT remote monitoring applications. The Node.JS is 40% faster than the traditional web server side features thread-based approach. The use of Node.js server-side handles a large number of clients' requests, then therefore, reduces delay in performing predefined actions automatically in IoT environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.511-515
• /
• 1996

A remote controlled mobile robot system has been developed and tested to monitor the radiation area in the nuclear power plant. The mobile robot system operates according to car-driving-like commands and is capable of radiation measurement and visual inspection in unmanned situations under radiation. The robot system is equipped with a radiation sensor and two cameras with appropriate illumination set-ups. The camera with auto-focus function and 8-times zoom lens is mounted on the pan/tilt rotational base and the other is mounted on the front panel of the robot system. All commands regarding the motion of the mobile robot and various sensors are given through the monitoring system which is designed to provide an integrated man-machine interface.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.3
• /
• pp.13-18
• /
• 2003

A remote monitoring system of the semiconductor equipment is used to monitor or control operations of the equipment. Most of the conventional monitoring systems are based on the client-server model with the general purpose PC. Basically, it implies the difficulties in the system reliability and cost down due to its size and complexity. To overcome these difficulties, we suggest an embedded web server which is based on the low-cost microprocessor. It is designed for the monitoring or controlling a dedicated equipment only. To evaluate the feasibility of the suggested embedded web server, we have implemented a test-board with ATMega103 and programmed the basic modules using the AVR-GCC. Finally, we have tested its operations on the MS Explorer 6.0 environment.