• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.151-160
• /
• 2009

At this study, we are developing a possible control system through remote monitoring for fire protection in various chemical factory facilities. It's possible to do real time confirmation of a normal operation presence of the various equipment installed in a chemical factory through the internet network at a fire fighting head office, an area fire department and a chemical factory situation room using this remote monitoring control system. When occurring, abnormal operation is the remote monitoring control system, which can check this immediately and notify the situation room administrator. After it was tested using developed remote monitoring control system, the remote monitoring for which the internet network was used confirmed possible.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.183-183
• /
• 2000

In this paper, web-based remote monitoring for cold-rolling system is developed and the analysis of spatial control system is performed. The remote monitoring system is able to grasp the status of cold-rolling system regardless of time and locations. We analyzed spatial control algorithm of the system with the collected data. The usefulness of spatial control system is shown by simulation studies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.140-143
• /
• 2000

This research presents new type of remote monitoring and control solution of PLC that can be used bi-directional and efficient management of factory automation through internet. This system has client/server architect for information handling between PLC and remote computer where a user can control and monitor target PLC. Actually the authors redirect RS232C connection between PLC and server computer into Internet connection between PLC and remote client computer using supplied PLC tool program So user feel like in front of PLC panel when he operates remote PLC through Internet. Each client/server program is constructed with Java language for security. In this paper the internet-based remote control system was proposed and proved validity by being applied to redirection of PLC control for factory automation.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.703-709
• /
• 2019

This paper proposes a monitoring and remote control system, an essential part of In Vehicle Infotainment (IVI) and Human Vehicle Interface (HVI) to provide safety and convenience to a driver. The system utilizes Bluetooth for a short range communication and utilizes WCDMA for a long range communication to enhance efficiency. In this paper, an integrated controller, which integrates a CAN communication module, a Bluetooth communication module, a WCDMA communication module, is designed to control a car. Also, a remote server for managing data is designed to provide real-time monitoring and remote control for a user via smart devices. Experiment results show that all the proposed remote control, driving log, real-time monitoring, and diagnostics functions are working properly. With the proposed system, a driver can drive safely by monitoring and inspecting a car before driving via smart devices, and control conveniently by controlling a car remotely.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.779-787
• /
• 2003

최근에는 웹(Web)을 기반으로 하여 여러 분야에 적용되는 원격 감시, 자동화 제어 시스템 등의 개발에 관한 연구가 활발히 전개되고 있다. 본 논문에서는 기존의 자동화 시스템에 원격 제어 기술을 추가하였다. 오류의 수정과 적용이 쉬운 LabView 그래픽컬 언어를 사용하여 멀티미디어 데이터 처리, 일반적인 통신망(TCP/IP)상의 확장성을 고려한 실시간 모니터링 및 원격 제어를 위한 방법을 제안하고, 온실 환경 제어 시스템에 적용하였다. 적용 결과는 온실의 제어 상황을 원격으로 제어 및 감시하는데 매우 효율적인 것으로 평가되었다.

• 풍력에너지저널
• /
• 제2권1호
• /
• pp.90-96
• /
• 2011

The purpose of this paper is to describe the control system for optimal performance of 2MW gearless PMSG wind turbine system, and to afford some techniques of the algorithm selection and design optimization of the wind turbine control system through analysis of load calculation and control characteristic. Wind turbine control system is composed of the main control system and remote control and monitoring system. The main control system is industrial PC based controller, and the remote control and monitoring system is a server based computer system. The main control system has a supervisory control of the wind turbine with operation procedures and power-speed control through the torque control by pitch angle. There are some applications to optimize the wind turbine system at the starting mode with increasing of rotor speed, and cut-in operating mode to prevent trundling cut-in and cut-out, a gain scheduling of pitch PID controller, torque scheduling and limitation of generation power by temperature limitation or remote command by remote control and monitoring system. Also, the server operation program of the remote control and monitoring system and the design of graphical display are described in this paper.

• Smart Structures and Systems
• /
• 제11권5호
• /
• pp.511-531
• /
• 2013

Recent advances in low-cost remote monitoring systems have made it possible and practical to perform structural health monitoring (SHM) on a large scale. However, it is difficult for a single remote monitoring system to cover a wide range of SHM applications due to the amount of specialization required. For the remote monitoring system to be flexible, sustainable, and robust, this article introduces a new cost-effective, advanced remote monitoring and inspection system named DuraMote that can serve as a next generation supervisory control and data acquisition (SCADA) system for civil infrastructure systems. To evaluate the performance of DuraMote, we conduct experiments at two representative counterpart sites: a bridge and water pipelines. The objectives of this article are to improve upon the existing SCADA by integrating the remote monitoring system (i.e., DuraMote), to describe a prototype SCADA for civil engineering structures, and to validate its effectiveness with long-term field deployment results.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.192-196
• /
• 2001

These days, most of electric power facilities need high stability. Therefore integrated system has been required to monitor and control electronic power distribution system in fields at all times when the interruption of electric power has occurred. To construct this system, unit that convert and process the input signal from fields needed. And for control and monitoring from remote place MMI software is required. Lastly network equipments are required for real-time communications. So, in this paper, units for control and monitoring of emergency power generator and for electric power monitoring in normal electric power and interruption of electric power are developed. Also integrated remote system for monitoring in remote is developed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.674-677
• /
• 2000

This paper describes a remote monitoring and control system using mobile internet environments through TCP/IP. The server program acts as the main interface between the machine system and the internet technology. The client program is to be distributed to the remote users such as PDA who want to monitor the machine status. A server system is designed to send information of the faults and status of application system to the client part. Therefore, The client parts can take measures and control the system remotely according to the error and faults of system. We developed the client- serversystem for remote control of a green house environment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.869-879
• /
• 2001

Serial communications such as RS-232C or RS-485 have been used to control and monitor the industrial plants for a long in cooperating with a computer or microprocessor. In recent years a great deal of effort has been made to achieve these control and monitoring through Internet network. This paper proposes a microprocessor system to implement remote control and monitoring system through Internet network. The proposed system uses NE2000 compatible NIC for data link and physical layer to access Internet network The microprocessor employed in the system plays a role of interfacing NE2000 compatible NIC interpreting protocols above link layer, controlling and monitoring industrial plants simultaneously. This paper also shows MMI and experimental results which control and monitor two power plants on the computer monitor with a mouse remotely to verify the proposed.