• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.149-152
• /
• 2005

A new methodology to detect forest fire burnt scars at near real time using MODIS (Moderate-resolution Imaging Spectroradiometer) data is presented here with a goal of introducing a new and improved capability to detect forest fire burnt scars in Thailand. This new technology is expected to increase the efficiency and effectiveness of the forest fire tackling resources distribution and management of the country. Using MODIS data in burnt scars detection has two major advantages - high availability of data and high resolution per performance ratio. Results prove the near real time algorithm suitable and working well in order to monitor the forest fire dynamic movement. The algorithm is based on the threshold separated linear equation of burnt and un-burnt. A ground truth experiment confirms the burnt and un-burnt? areas characteristics (temperature and NDVI). A threshold line on a scatter plot of Band I and Band 2 is determined to separate the burnt from un-burnt pixels. The different threshold values of NDVI and temperature use to identify pixels' anomaly, abnormal low NDVI and high temperature. The overlay (superimpose) method is used to verify burnt pixels. Since forest fire is a dynamic phenomenon, MODIS burnt scars information is suiting well to fill in the missing temporal information of LANDSAT for the forest fire control managing strategy in Thailand. This study was conducted in the Huai-Kha-Kaeng (HKK) Wildlife Sanctuary, Thailand

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.4
• /
• pp.337-350
• /
• 2004

Because of a security problem and not enough IPv4 address space, the home network has been made up of private network, and it has been separated from Internet. This fact prevents people in Internet from controlling and monitoring home appliances. So, this paper designs and Implements the UPnP Proxy System which offers functions for users to control and monitor home appliances. When users are in the outside of the home network, they do not know which devices were connected in the home network because the advertisement messages of UPnP devices would not be delivered to the outside of the home network. Also, users cannot access devices directly, and their control messages are not delivered into the home network. So, this paper designs and implements the UPnP Proxy System to solve these problems. The merit of the system is that users can control and monitor home appliances in realtime using presentation web documents with the HTTP push technology.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.93-98
• /
• 2011

In this paper, we propose the surveillance and combat robot framework for remote monitoring and robot control on the smart phone, which is implemented with the fusion technology called RITS(Robot technology & Information Technology System). In our implemented system, the camera phone mounted on the robot generates signals to control the robot and sends images to the smart phone of the operator. Therefore, we can monitor the surrounding area of the robot with the smart phone. Besides the control of the movement of the robot, we can fire the weapons armed on the robot by sending the fire command. From experimental results, we can conclude that it's possible to control the robot and monitor the surrounding area of the robot and fire the weapons in real time in the region where the 3G(Generation) mobile communication is possible. In addition, we controlled the robot using the 2G mobile communication or wired phone when the robot is in the visual range.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.63-69
• /
• 2017

This study is about the development of a smart bed control system to be able to detect the human position and body signal on bed. The main control board in the bed control system consists of the human sensing part, motor driving part and MCU. Here, to increase the credibility to check the human presence on bed, the human sensing part is combined with the human position part by membrane sensor and the body-signal detecting part of EMFI sensor. Also, remotely connecting the two detected signal to the application program of the app mode makes it possible to monitor human information on bed. In this paper, the remote function monitoring of the on-bed human information by bluetooth communication will be abe to make it applicable to the technical prevention method of the bed fall and absence accident in hospital and care facilities.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.222-233
• /
• 2017

Debugging in distributed environments, such as wireless sensor networks (WSNs), which consist of sensor nodes with limited resources, is an iterative and occasionally laborious process for programmers. In sensor networks, it is not easy to find unintended bugs that arise during development and deployment, and that are due to a lack of visibility into the nodes and a dearth of effective debugging tools. Most sensor network debugging tools are not provided with effective facilities such as real-time tracing, remote debugging, or a GUI environment. In this paper, we present a hybrid debugging framework (HDF) that works on WSNs. This framework supports query-based monitoring and real-time tracing on sensor nodes. The monitoring supports commands to manage/control the deployed nodes, and provides new debug commands. To do so, we devised a debugging device called a Docking Debug-Box (D2-Box), and two program agents. In addition, we provide a scalable node monitor to enable all deployed nodes for viewing. To transmit and collect their data or information reliably, all nodes are connected using a scalable node monitor applied through the Internet. Therefore, the suggested framework in theory does not increase the network traffic for debugging on WSNs, and the traffic complexity is nearly O(1).

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.1-7
• /
• 2009

Use of the PV(photovoltaic) generation system is increased in such areas as remote mountain places or islands at which electrical energy is not serviced. The stand alone PV system is required the power storage products such as battery, fly wheel and super capacitor. Several lead storage batteries are connected in series to get high voltages. The life of lead storage battery is shortened when over charge or over discharge takes place. So, it is needed to control batteries not to be overcharged or be discharged deeply. Voltage of each battery was ignored in former control methods in which overall voltage was used to control charge or discharge battery. In this study, the charging and discharging voltage variations of sealed lead storage batteries with l2V/l.2A were investigated step by step experiments. The results of the test show that one should consider and specify the state of each battery to prevent overcharge or deep discharge. With the basis of the experiments, we designed a monitoring unit to monitor battery voltages simultaneously using micro-controller. The unit measures voltage of 20 batteries simultaneously and displays data on the color LCD monitor with curved line graph. It also sends data to PC using the RS232C communication port. The designed unit was adapted to stand alone PV system with 1kW capacity and lead storage batteries are connected to the PV generation system. The number of lead storage batteries was 10 in series and 12V/250Ah each. Resistive load with 3kW was used for discharging.

• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.125-129
• /
• 2018

In order to develop a smart cultivation facility based on ICT (Information Communication Technology), a cultivation house was selected. Sensor devices were installed to monitor any changes in the cultivation environment. A control panel was constructed to monitor and control the data on environmental changes collected by the sensors. To efficiently manage the proceedings of the cultivation environment, the cultivation process was divided into 4 stages. We designed an environmental control module using these processes. PC and mobile phone software were designed for remote monitoring and control to develop a smart cultivation system that can conveniently manage the cultivation environment and produce mushrooms in a more stable manner.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.332-337
• /
• 2010

In this paper, we propose G-Robot framework implemented with the fusion technology called RITS(Robot Technology & Information Technology System) for robot control and remote monitoring using the mobile phone. In our implemented system, the mobile phone mounted on the robot controls the robot and sends the images to the mobile phone of the user. We can monitor surrounding area of the robot with mobile phone and control the movement of the robot by sending the data between mobile-phones. Also, if the predefined situation occurs to the robot, the mobile phone on the robot sends the data to the mobile-phone of the user. From the experimental result, we can conclude that it's possible to control the robot and monitor surrounding area of the robot in real time in the region where the 3G(Generation) communication is possible. In addition, we can control the robot using the bluetooth instead of the mobile phone communication if the robot is in visual range.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.859-863
• /
• 2005

This paper describes the improvement of power control characteristics of ship's emergency lighting power supply(SELPS), by which electric power is controlled extensively, and power ON-OFF is controlled and system parameter monitored in remote distance by PC serial communication. Proposed system is composed of step-down converter(SDC), emergency power supply circuit(EPSC), half bridge(HB) inverter, fluorescent lamp(FL) starting circuit, microprocessor control and multi communication circuit. Experimental works confirm that relative system stops when over current is detected and speedy and stable emergency power is supplied when main power source cut-off, and controls input power up to 35[$\%$] by adjusting pulse frequency of the HB inverter, and ON-OFF control of multiple SELS, real time transmission and monitor of parameters as to voltage, current, and power values are performed appropriately by PC communication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.236-240
• /
• 2004

We have implemented image monitoring system on PXA255 processor based embedded board that is ported QT/Embedded 2.3.7 version. User is able to monitor camera's capture image for widely separated host PC at client PXA255 board target board by ethernet communication method. And we designed PCI interface card that control motor for camera's Pan & Tilt. Bitmap format's images of $320\times{240}$ size are displayed on PXA255 board's TFT-LCD and User is able to monitor wanted position's image by touch screen input method.