• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.960-967
• /
• 2012

Wireless sensor network is used at the environment to obtain nearby information and since such information is transferred through wireless link, it causes unnecessary re-sending and disadvantage of big energy consumption at node. Because of this to select reliable, energy effective link, method of estimating quality on wireless link using RSSI(received signal strength indication), LQI(link quality indication), etc is needed on wireless link. To set up path extending survival time by reducing energy consumption of nodes at the wireless sensor network, the thesis selects with small standard deviation of LQI after obtaining LQI within each path. Additionally, LQI standard deviation routing algorithm is compared based on LQI algorithm such as minimum-LQI, hop-LQI weight and RF output -7dBm. According to the outcome, the algorithm suggested has superior characters such as the number of node, retransmission rate and network life span respectively compared to existing algorithm. Therefore, energy consumption can be efficiently reduced in case that LQI standard deviation routing scheme suggested by this paper is adapted to wireless sensor network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.225-234
• /
• 2012

In Wireless Sensor Networks (WSNs) where deployed sensors are not stationary, the most important demand of is to design a cost effective and reliable network. This paper proposes an energy aware network construction and routing scheme, which is based on the hierarchical approach to distribute the task in some sensors in order to prolong the network lifetime. It aims to make even the energy consumption on constitute nodes. With the node hierarchy, the sink initiates the construction by electing gateway nodes in the network and the elected gateway nodes participate to form logical clusters by electing a cluster head in each cluster. Then, the cluster heads aggregate data from the sensing sensors and transmit the data to the sink through the gateway. Our simulation result illustrates that the proposed scheme provides a basement to reduce the source of energy dissipation in network construction, and as well as in data routing.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.297-307
• /
• 2009

For reliable water quality simulation by semi distributed model, accurate daily runoff simulation should have preceded. In this study, newly developed channel routing method which is nonlinear storage method is combination of Muskingum routing method and variable storage routing method and temporally weighted average curve number method were applied for effect analysis of water quality simulation. Developed modules, which are added in SWAT models and simulation, were conducted for the Chungju dam watershed. The simulation result by each module applied effect. As a result of analysis contribute water quality modeling, nonlinear storage method is more effective than temporally weighted average curve number method. Nutrient loading discharge was affected by development of runoff delaying from improvement of channel routing, because of characteristics of nonpoint source pollution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1034-1042
• /
• 2008

It is very hard, but important to sustain path stability for a reliable communication in mobile ad hoc networks. We propose a novel source routing protocol that establishes a group path with virtual multiple paths to enable a robust communication. The entire mobile nodes form a disjoint set of clusters: Each has its clusterhead as a cluster leader and a unique cluster label to identify itself from other clusters. A group path is a sequence of cluster labels instead of nodes and the nodes with the same label collaborate to deliver packets to a node with next label on the group path. We prove by resorting to simulation that our proposed protocol outperforms the existing key routing protocols, even for a network with a high node mobility and a high traffic.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2010

In Wireless Sensor Network, transmission errors are frequently occurred due to the node failure, battery discharge, and interference by objects. Although Directed Diffusion has been considered as a prominent Data-centric routing algorithm, it revealed some weaknesses at this kind of unexpected network errors. In order to address the problem, we proposed a radio-aware routing algorithm for improving reliability of Directed Diffusion in Wireless Sensor Networks. The proposed algorithm is aware of the network status based on the radio information of MAC and PHY layers using a cross-layer approach. The link quality and the node failure information from the acquired network status were used to decide an alternative path to provide a reliable data transmission in error-prone sensor networks. The proposed algorithm showed its effectiveness of the data delivery rate and data ratio with several simulations consisting of various error rates and the number of nodes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.775-784
• /
• 2008

It is not easy to access very high speed Internet services at sea due to some technical and economical problems. In order to realize the very high speed Internet services at sea like on land, new communication network models based on MANET should be adopted. In this paper, a new MANET model at sea is provided, which considered the ocean environments, and the characteristics and movement of vessels. On the basis of the fact that most vessels navigate on the predetermined courses, which are the shortest paths between source and destination ports in most cases, a type of location oriented routing protocol is proposed in this paper. The Hybrid Course-Based Routing Protocol(HCBR) makes use of the static information such as courses and positions of ports to proactively find the shortest paths not only among ports but also the cross points of courses. HCBR also makes use of the locational information of vessels obtained via GPS and AIS systems to reactively discover the shortest route by which data packets are delivered between them. We have simulated the comparison of the performance of HCBR with those of LAR scheme 1 and scheme2, the most typical protocols using geographical information. The simulation results show that HCBR guarantees the route discovery even without using any control packet. They also show that HCBR is more reliable(40%) and is able to obtain more optimal routes(10%) than LAR scheme1 and scheme2 protocols.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.3
• /
• pp.55-70
• /
• 2016

The most critical research issue in MANET environment is on supporting reliable communication between various devices. Various Multi-Hop Routing Protocol studies have proceeded. However, some problems you might have found when you use the existing link state routing technique are that it increases Control Message Overhead and it is unstable when node moves in CR circumstance which has transformation of using channel and MIMC circumstance which uses a number of interfaces. This essay offers a technique which is based on On-Demand Hello and the other technique which used Broadcast Interface of optimization as a solution to decrease Control Message Overhead. Also it proposes Quick Route Restoration technique which is utilized by GPS and MPR Selection technique which consider mobility as a solution of stable communication when node moves. Those offered Routing Protocol and OPNET based simulator result will be expected to be an excellent comparison in related research fields.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.244-250
• /
• 2011

Gossip is a well-known protocol which was proposed to implement broadcast service with a high reliability in an arbitrarily connected network of sensor nodes. The probabilistic techniques employed in gossip have been used to address many challenges which are caused by flooding in wireless sensor networks (WSNs). However, very little work has yet been done on real-time wireless sensor networks which require not only highly reliable packets reception but also strict time constraint of each packet. Moreover, the unique energy constraining feature of sensor makes existing solutions unsuitable. Combined with unreliable links, redundant messages overhead in real-time wireless sensor networks is a new challenging issue. In this paper, we introduce a Reliable Gossip Zone, a novel fine-tailored mechanism for real-time wireless sensor networks with unreliable wireless links and low packet redundancy. The key idea is the proposed forwarding probability algorithm, which makes forwarding decisions after the realtime flooding zone is set. Evaluation shows that as an oracle broadcast service design, our mechanism achieves significantly less message overhead than traditional flooding and gossip protocols.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.424-434
• /
• 2017

In industrial wireless sensor networks, many applications require integrated QoS supporting. This paper proposes a reliable protocol for real-time monitoring in industrial wireless sensor networks. Retransmission is well-known to recover the transmission failure, however, this might cause the time delay to violate the real-time requirement. The proposed protocol exploits broadcasting feature of wireless networks and the temporal opportunity concept. The opportunities to relay the data packets are shared by the broadcasting feature and the temporal opportunity concept maximize the number of candidates in communication. Simulation results show that the proposed protocol is superior to the existing real-time protocols in term of real-time service and reliability.