• International Journal of Reliability and Applications
• /
• v.1 no.1
• /
• pp.89-104
• /
• 2000

Accelerated testing consists of a variety of test methods for shortening the life of products or hastening the degradation of their performance. This paper presents practical, modern statistical methods for evaluating the reliability of Nickel-Cadmium batteries at their design temperature of 2$0^{\circ}C$ by accelerated life test. Batteries have been life tested at three high temperature conditions, 50, 60, 7$0^{\circ}C$, respectively to yield failures quickly. The failures have been observed and judged by means of charge and discharge current integration. Analyses of life data from those conditions resulted in the Weibull distribution, which has been verified on the ground of the Kolmogorov-smirnov test and the pairwise t-test. Life data are modeled according to the Arrhenius life-temperature relationship. The mean life of tested batteries is assessed at about 590 cycles, and the activation energy of this chemical reaction is concluded to be 0.39eV as results. This study provides procedures for estimating the reliability of batteries in a short period, which has little been possible in domestic industries. The results can be applied in many fields such as proof testing, acceptance testing, and estimating assurance periods.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.732-738
• /
• 2006

This research provides a scheme for Highly Accelerated Stress Test that is necessary to demonstrate reliability prediction of Korean Rapid Transit Railway Train Control System sub-equipment, which is calculated by a relevant standard for failure rate prediction of electronic products. Although determining failure information generated in the process of trial running by statistic analysis is widely accepted as a measure of confirmation for reliability prediction, this research suggests the modeling for System Life Test determined by accelerating stress factors as a measure of confirmation for reliability prediction of sub-equipment unit that is generated ahead of a trial running in System Life Cycle. Consequently, the research demonstrates sub-equipment unit reliability test, which is based on the model derived from Accelerated Stress Test, according to accuracy level and the number of samples, and conducts an official experiment by making out a reliability test procedure sheet based on test time as well.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.111-118
• /
• 2006

Recently, the reliability evaluation and analysis are applied far many industrial products which are required to guarantee in quality and efficiency. The purpose of this paper is to present some of reliability evaluation methodologies that are applicable to machine tools. Especially ATC (Automatic Tool Changer), which is a core component of line center, was chosen as the target of the reliability evaluation and analysis. The scope of research is reliability prediction, reliability test and evaluates their results. The results of reliability evaluation have shown the failure rates, MTBF (Mean Time Between Failure), reliability for those components of ATC and real tests reliability through the constructed reliability test-bed. It is expected that proposed methodologies would increase reliability for a high-speed line center.

• Journal of Applied Reliability
• /
• v.14 no.2
• /
• pp.129-136
• /
• 2014

Reliability test is focusing to detect the unexpected reliability failure and solve them for the high quality of products. The test data should be used to assess and project the current level of interesting product reliability and so it is very important to have the accurately assessing methodology with test data. There are two type of trend for test data as constant and changing one during testing and this paper shows the difference in the assessing results of these two cases. There is less information how to define the existence of reliability growth rate changing and calculate the parameters of the reliability growth models to make an accurate assessment with such condition, so i established the process and mathematical model to calculate the parameters at such condition to make reliability growth curve with high Goodness of Fit. I validated the new method with the data made from Monte Carlo Simulation and case from Demko (1993). Even the assessed result with the new methodology may be different with the case by case because of very diversity in test condition and testing product quality, but the process and method founded in this research can be applied to any case using Duane and AMSAA model for their test data assessment. I also present the evaluation method to see the effectiveness with new one which is a conventional knowledge and not popular to use, so it is possible to compare the results with the newly presented and conventional method for better business decision.

• Journal of Applied Reliability
• /
• v.9 no.3
• /
• pp.195-218
• /
• 2009

Wiper motors are used in every automobile. They are exposed to a very diverse environment and consists of several components and, therefore needs careful approach to the enhancement and assessment of reliability of the item. In this article reliability standards for wiper motors are established in terms of quality certification test and failure rate test.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.981-994
• /
• 2017

Purpose: In this study, the reliability growth management procedures for armed vehicle is suggested and an illustrative case study of launcher system is given. Methods: Crow-AMSAA model is adopted to manage reliability growth of armed vehicle using failure data acquired from development test phase to field operation phase. Between the development test phase and the production phase, the suggested reliability growth procedures for armed vehicle entails accelerated life test of the selected module whose design is changed to improve its reliability for assuring the target system reliability. And it can be verified through estimating the system reliability based on the failure data of field operation phase. Results: It is shown that the proposed reliability growth management procedures are effective for armed vehicle based on the case study of launcher system. After estimating the reliability of launcher system at every development test, some items are selected to change their designs for improving reliability. Accelerated life test is performed to prove the reliability improvement and finally it is verified through the field operation. Conclusion: The reliability growth management procedures for armed vehicle is suggested and the case study of launcher system shows it can be effective for managing the reliability growth of the armed vehicle.

• Corrosion Science and Technology
• /
• v.8 no.3
• /
• pp.116-118
• /
• 2009

Korea Institute of Construction Materials founded Seosan Outdoor Exposure Test Site 2005 at Korea, which is a part of Worldwide Exposure Network (WEN). To evaluate the test site along with other exposure test sites, three different types of paints have been under real time weathering conditions at three major weathering test facilities around the world. Using these test specimens several spectroscopic experiments along with physical tests have been performed. Also acceleration tests have been performed using the same paints. The correlation of weathered paints among three different test facilities and accelerated test results has been compared. From the results the reliability of Seosan Weathering Test Facility and reasonable life time prediction tests are discussed.

• Journal of the Korea Society for Simulation
• /
• v.27 no.1
• /
• pp.25-32
• /
• 2018

This paper presents an efficient software reliability testing method for the model based auto-generated code and reify a dynamic test procedure. The benefits of executing the model-based each static/dynamic reliability test before the code-based static/dynamic reliability test are described. Also, The correlations of code/model based reliability test are demonstrated by using model testing tool, Model Advisor and Verification and Validation, and the code testing tool, PolySpace and LDRA. The result of reliability test is indicated in this paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1914-1917
• /
• 2005

Recently, the reliability evaluation and analysis are applied for many industrial products, and many products are required to guarantee in quality and in efficiency. The purpose of this paper is to present some of reliability evaluation methodologies that are applicable to machine tools. Especially ATC(Automatic Too Changer), which is core component of line center, was chosen as the target of the reliability evaluation and analysis. The scope of research is reliability prediction, reliability test and evaluates their results. The results of this research has shown the failure rate, MTBF(Mean Time Between Failure), reliability for those components and real tests reliability through constructed reliability test-bed. It is expected that proposed methodologies will increase reliability for high speed line center.

• Korean Journal of Child Studies
• /
• v.6 no.1
• /
• pp.41-59
• /
• 1985

The present research investigated the validity and reliability of the Verbal and Figural tests of the Torrance Tests of Creative Thinking(TTCT). Its potential as a basis of normative data, and differences in children's sex and grade in school were also examined. The subjects of this study were 360 children (180 boys, 180 girls) enrolled in two public elementary schools grades 1-6. Pearson's product-moment coefficient and two-way analysis of variance were used for analyzing data collected from these tests. The present research showed a coefficient of concurrent validity of the TTCT-Verbal test of .40. The coefficient of equivalence from reliability between the TTCT-Verbal test and TTCT-Figural test was .65 (p<.01). Regarding the coefficient of interscorer reliability, the total score of the TTCT-Verbal test was .86 and that of the TTCT-Figural test was .95. The coefficient of intrascorer reliability on the total score of the TTCT-Verbal test was .93 and that of the TTCT-Figural test was .96. Generally, score reliability was .86 to .96 in total score but there were great differences in the reliability of sub-factor scores. There were no significant differences between boys and girls in the distribution of scores on the TTCT-Verbal test and the TTCT-Figural test. There were significant differences between grades (p<.01) on the distribution of total scores and subfactor scores of the TTCT-Verbal Test.