• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.35-43
• /
• 2007

In this paper, the inductive power collector using electromagnetic induction for vehicle such as the PRT(Personal Rapid Transit) system is suggested and son ideas for power collector design to improve tile power transfer performance are presented. And also, the analysis of the inductive power transfer system in conjunction with series resonant converter operating variable high frequency is shown. Of particular interest is the sensitivity of the complete system to variations in operational frequency and parameters. In inductive power transfer system electrical power is transferred from a primary winding in the form of a coil or tract to one or more isolated pick-up coils that my relative to the primary. The ability to transmit power without contact enables high reliability and easy maintenance that allows inductive power transfer system to be implemented in hostile environments. This technology has found application in many fields such as electric vehicles, PRT(Personal Rapid Transit) etc. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, we will show you various characteristic of inductive power transfer system as double layer construction of secondary winding, which was divided in half to increase both output current and output voltage, a model of power collector and parallel winding structure, a model of concentration/ decentralization winding and the effects of parameter and operational frequency variation.

• Anxiety and mood
• /
• v.13 no.2
• /
• pp.123-131
• /
• 2017

Objective : The PTSD Checklist (PCL) is a self-report screen for posttraumatic stress disorder (PTSD) that can be scored for both diagnostic assessment and symptom severity measurement. The most recent revision of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) contains a number of changes to the definition of PTSD, and the aim of this study was to assess the psychometric properties of the Korean version of the PCL for the DSM-5 (PCL-5-K). Methods : The participants were 204 Korean veterans of the Vietnam War who completed the PCL-5-K, the Mini Mental Status Examination (MMSE), PTSD module of Structured Clinical Interview for DSM-5, Research Version (SCID5-RV PTSD module), Korean version of Impact of Event Scale-Revised (IES-R-K) and Combat Exposure Scale (CES-K). Results : The PCL-5-K demonstrated good internal consistency (${\alpha}=0.972$) and test-retest reliability (r=0.96); the suggested cut-off score for PTSD diagnosis was ${\geq}37$ with 0.88 sensitivity and 0.96 specificity. The PCL-5-K scale correlated highly with the IES-R-K and CES-K. Factor analysis identified only one factor. Conclusion : Among elderly Korean veterans of the Vietnam War, the PCL-5-K demonstrated similar psychometric qualities to those of both the original PCL and subsequent versions. It is expected that the PCL-5-K will be a useful PTSD screening tool.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.230-236
• /
• 2007

This paper presents a resource management mechanism for the mesh networking in IEEE 802.15.3 High-rate WPAN. IEEE 802.15 TGS is standardizing the MAC and PHY for mese networking. This task group researches the mechanism that are extension of network coverage without increasing transmit power of receive sensitivity, and studies the enhanced reliability via route redundancy. In this paper we propose the distributed resource management scheme that is fairly using the channel resource in the piconet without centralized piconet coordinator. Each DEV reserves the channel time and broadcasts its information. This scheme has unfairness for later associated DEV because of preoccupation of earlier associated DEVs. This paper presents the method that fairly allocates the channel time in MAC layer. And we evaluate the performance enhancement using simple simulations.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.343-357
• /
• 2018

Algorithm which can analyze the slope failure behavior utilizing the comprehensive information of the dense point of joint poles and the joint set orientations, both of which are obtained statistically, and the defect pattern of pole distribution has been developed. This method overcomes the potential incorrectness of the hemispheric projection method utilizing the joint set orientations only and also enhances the reliability of slope failure analysis. To this end a method capable of calculating the joint dispersion index directly from the joint pole distribution, instead of contour map, has been devised. The representative orientations for the slope failure analysis has been determined by considering the number and orientations of cone angle-dependent joint sets as well as the joint dispersion index. By engaging these representative orientations to the hemispheric projection analysis more reliable slope failure examination has been carried out. Sensitivity analysis for the potentially unstable slope of plane failure mode has been performed. Significance of joint strength index and the external seismic loading on the slope stability has been fully analyzed.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.45-54
• /
• 2000

Design-oriented approximate structural reanalysis models are compared and assessed, particularly with focus on the case of large changes of design variables. The effectiveness and reliability are demonstrated by means of numerical examples. The results of the study suggest the following conclusions relative to the potential of the procedures. (A) local approximation is only appropriate for the case of small changes in design : (B) global approximation is exact for the case of large changes in a small number of design variables, but inefficient : (C) local-global approximation is most effective and reliable for the case of large changes with a large number of design variables. These methods can improve the total efficiency when they are appropriately used to the design information for the redesign process of large scale structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.633-639
• /
• 2009

For operation of IEEE 802.22 WRAN system, spectrum sensing is a essential function. However, due to strict sensing requirement of WRAN system, spectrum sensing process of CR nodes require long quiet period. In addition, CR nodes sometimes fail to detect licensed users due to shadowing effect of wireless communication environment. To overcome this problem, CR nodes collaborate with each other for increasing the sensing reliability or mitigating the sensitivity requirement. A general approach for decision fusion, the "k out of N" rule is often taken as the decision fusion rule for its simplicity. However, since k out of N rules can not achieve better performance than the highest SNR node when SNR is largely different among CR nodes, the local SNR of each node should be considered to achieve better performance. In this paper, we propose two novel data fusion methods by utilizing confidence vector which represents the confidence level of individual sensing result. The simulation results show that the proposed schemes improve the signal detection performance than the conventional data fusion algorithms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1145-1158
• /
• 1994

A three-dimensional, finite difference, numerical model with free surface was developed on ${\sigma}$-coordinate. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The scheme is essentially independent of the stringent stability criteria (CFL condition) for explicit schemes of external surface gravity wave. Implicit algorithm was applied for vertical shear stress, Coriolis force and pressure gradient terms. The reliability of the model with vertically variable grid system was checked by the comparison of simulation results with analytic solution of wind-driven currents in a one-dimensional channel. Sensitivity analysis of differencing parameters was carried out by applying the model to the calculation of wind-driven currents in a square lake.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.116-122
• /
• 2001

In this paper, to make a base of the fire safety assessment about ship's fire protection design and Classification Society rule, statistical informations and modeling techniques for the fire safety engineering are investigated and probabilistic safety assessment methods in the structural reliability engineering are introduced. FSEM(Fire Safety Evaluation Module) developed in this paper calculates the probability of fatality, which can be used as an index of fire safety. FSEM is used to calculate the probability of fatality of the evacuees in a small room installed according to the rules for fire-proof. Sensitivity analysis is executed to investigate FSEM's applicability to ship. From results, the necessity of new criterion for ship's fire safety design, the need to study the human behavior in the evacuation from fire, and the development of new fire progress model considering special situations in ships are acknowledged.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.172-178
• /
• 2001

K-Ar dating system of Korea Basic Science Institute (KBSI) was installed in 1997 and has been used since then. The system consists of high temperature graphite furnace, gas purification system, and mass spectrometer with data acquisition system. K-Ar age is determined by the measurement of the concentrations of Ar and K through isotope dilution method using $^{38}Ar$ as spike and flame spectroscopy, respectively. The accuracy and reliability for the K-Ar age are checked using the several K-Ar standard materials. Although the exact age determination for young samples of less than 1 Ma is hampered by small fluctuations of sensitivity and mass discrimination, the present system yields the reliable K-Ar age compared to the standard materials of Tertiary and Mesozoic age. The measurements for the SORI93 biotite with the recommended K-Ar age of $92.6\pm$0.6 Ma and Bern4M muscovite of $18.5\pm$0.6 Ma yield the reliable age of $92.1\pm$1.1 Ma and $17.8\pm$0.2 Ma, respectively.

• Korean Journal of Head & Neck Oncology
• /
• v.20 no.2
• /
• pp.143-146
• /
• 2004

Background and Object: The role of fine needle aspiration cytology (FNAC) and frozen section (FS) in management of thyroid neoplasms continues to generate considerable controversy. We reviewed our current experience to determine the clinical utility of FNAC and FS in our surgical management and investigated reliability of FNAC and FS in planning the extent of thyroid resection. Material and Method: 212 patients who had operations for thyroid disease from May 1996 to November 2003 were included our retrospective study. FNAC was undertaken in 175 patients and FS was done in 148 patients. Result: The sensitivity and specificity of FNAC were 72.1% and 100%, respectively, and those of FS were 67.2% and 100%. The results of FNAC were benign (n=72) , malignancy (n=31), indeterminate (n=9), and nondiagnostic (n=63). The results of FS were benign (n=95), and malignancy (n=53). The 9 indeterminate cases on FNAC were benign (n=6) and malignancy (n=3) on final pathology, and benign (n=7) and malignancy (n=2) on FS. The false negative of FNAC were micro papillary carcinoma (n=6) and follicular carcinoma (n=6). The false negative of FS were micropapillary carcinoma (n=10) and follicular carcinoma (n=2). Conclusion: When results of FNAC are interpreted as indeterminate, FS is a valuable tool. FS is helpful in determining the extent of thyroidectomy when results of FNAC were follicular neoplasm. However we always concerned about micropapillary carcinoma and follicular carcinoma although FNAC and FS were benign.