• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.625-634
• /
• 2007

KARI SUAV program was initiated to develop a Smart Unmanned Aerial Vehicle with innovative smart technologies. SUAV is a tilt rotor aircraft of which rotor system is 3-bladed, gimbaled hub type. Several existing concepts of gimbaled hub were analyzed and compared to investigate the applicability to SUAV rotor system design. From the result of these investigations, it was concluded that a new design concept of low cost and high reliability characteristics was necessary for the rotor hub development of SUAV. The design requirements of new gimbal hub concept and the design results were presented. Also, the analysis results to verify the satisfaction of design requirements of SUAV rotor system were presented.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.140-145
• /
• 2015

An on-board reaction wheel is payload of small satellite for space environment test. The reaction wheel is designed for considering physical, electrical, and environmental requirements. In this paper, we report design, manufacturing process and operation performance verification. Furthermore, the specifications of environmental test are performed under environmental conditions for guarantee of stability and reliability. The operation and environment test results are presented to meet the requirements at the reaction wheel flight model.

• 산업경영시스템학회지
• /
• 제30권3호
• /
• pp.135-149
• /
• 2007

This paper investigates the relative effect of each ISO 9001 : 2000 quality management system's requirement and business performance. The empirical tests are conducted in ISO 9001 certification companies. As a result, the $1^{st}$, it shows the requirements positively affect performance of financial. The $2^{nd}$, also it shows the requirements positively affect non-financial performance. The $3^{rd}$ also it show the non-financial performance positively effect performance of financial performance.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권12호
• /
• pp.537-542
• /
• 2015

소프트웨어 공학에서 요구사항 분석은 전체 시스템의 성공률을 좌우한다. 요구사항에서 발생되는 오류는 전체 시스템에 영향을 주게 되고, 그 결과 고객의 만족도가 낮아진다. 따라서 요구사항 단계에서 정확한 분석을 위하여 이해관계자 간의 의견을 교환하고 수정할 수 있는 도구가 필요하게 된다. 본 논문에서는 이와 같은 문제를 해결하기 위하여 이해관계자 간의 의견을 교환할 수 있는 도구를 설계하고자 한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권5호
• /
• pp.257-265
• /
• 2004

The complex documentation involved in power system analysis software require a well-defined and friendly database system. We have developed an object-oriented database management system for power system analysis, and have described load flow analysis and transient stability analysis using object-oriented database(OODB). Database management systems are widely used and achieve high reliability of data management in the engineering fields. However relational database system have shortcomings in application to power system analysis. ill relational database, the data model is too simple for modeling complex data and database languages are very different from programming languages. Object-oriented techniques are sufficiently powerful to support data-modeling requirements of GUI applications. The GUI is implemented using C++ on a MS windows platform. The OODB supports data modeling requirements of GUI applications and the performance is well acceptable for Gill applications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.330-335
• /
• 2000

Faults detection and containment requirements are typically allocated from a top-level specification as a percentage of total faults detection and containment, weighted by failure rate. This faults detection and containments are called as a fault coverage. The fault coverage requirements are typically allocated identically to all units in the system, without regard to complexity, cost of implementation or failure rate for each units. In this paper a simple methodology and mathematical model to support the allocation of system fault coverage rates to lower-level units by considering the inherent differences in reliability is presented. The models are formed as a form of constrained optimization. The objectives and constraints are modeled as a linear form and this problems are solved by linear programming. It is identified by simulation that the proposed solving methods for these problems are effective to such requirement allocating.

• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.537-548
• /
• 2000

The requirement of ultra high reliability of the safety critical software can not be demonstrated by testing alone. The specification based on formal method is recommended for safety system software. But there exist various kinds of formal methods, and this variety of formal method is recognized as an obstacle to the wide use of formal method. In this paper six different formal method have been applied to the same part of the functional requirements that is calculation algorithm intensive. The specification results were compared against the criteria that is derived from the characteristics that good software requirements specifications should have and regulatory body recommends to have. The application experience shows that the critical characteristics should be defined first, then appropriate method has to be selected. In our case, the Software Cost Reduction method was recommended for internal condition or calculation algorithm checking, and statechart method is recommended for the external behavioral description.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2108-2110
• /
• 2001

Used analog control systems have been converted into digital control systems due to performance degradation and difficulty of maintenance. There are few domestic DCS (Distribued Control System)s that have been applied to power plant. To apply a domestic DCS to power plant, the reliability, redundacny, and fault tolerance of DCS is important. Besides those items, the control action of control function block is also important. In this paper, we describe the requirements that PID control function block has to have, and implement a PID control function block that satisfies those requirements. Finally, real control result using an implemented PID function block in thermal power plant shows the validity of an implemented PID control function block.

• 디지털산업정보학회논문지
• /
• 제15권2호
• /
• pp.53-61
• /
• 2019

In this paper, we propose 'a self - conformance system of convergence security provider' to provide basic data for security and reliability of convergence industrial technology, system and service. It is difficult to evaluate convergence security systems, limited to information and communication service providers, unable to check convergence security items, burden of submission documents, difficulty in measuring convergence security service level and we will summarize product and service-based requirements that can be integrated and systematically measure the level of convergence security and define renewed life cycle-based convergence security information and content security and assurance requirements. On the basis of this, each convergence security company declares conformity with the standard itself without the certification of the certification body, and introduces the provider conformity certification system which can manufacture and sell. This will enable the company to strengthen its competitiveness through timely launch and implementation of products and services and cost reduction.

• 한국가스학회지
• /
• 제22권5호
• /
• pp.72-78
• /
• 2018

최근 가스안전기기의 동향은 무선 기술의 발전과 수요자의 요구에 따라 무선 가스안전기기에 대한 개발과 연구가 활발히 이루어지고 있다. 무선의 신뢰성에 대한 논란이 제기되고 있지만 무선의 편리성이란 강점으로 가스안전기기에 도입이 확대되고 있으므로 이러한 기기의 안전성과 신뢰성을 검증할 수 있는 합리적인 성능평가 방안이 필요하다. 본 논문은 무선 가스안전기기에 대한 안전성과 신뢰성을 확인하여 기기가 원활하게 확대 보급될 수 있도록 성능평가 장치 설계 제작과 성능평가 방안 제시를 목적으로 한다. 이를 위하여 국내 외 무선 가스안전기기 관련제도를 조사하여 신뢰성과 안전성을 확인하는 기능과 방법을 검토하고 주요기능에 대해 시험평가가 가능한 장치를 제작하며 무선가스안전기기의 신뢰성과 안전성 요구조건을 만족시키는 주요 성능평가 항목(안)과 시험방안을 제시한다.