• Advances in concrete construction
• /
• v.13 no.2
• /
• pp.191-198
• /
• 2022

FIB is introduced as the sole guideline for the design purpose that results in a practical relationship for the torsional capacity of concrete beams strengthened with carbon fiber-reinforced polymer (CFRP). This study applies first-order reliability method to assess the reliability evaluation of the torsional capacity of CFRP-strengthened beams on the basis of FIB guidelines. In terms of steel reinforcement losses, this study applies a corrosion model to investigate the ceaseless deterioration of the existing structure. Hence, the average of reliability indices varies between 2.68 and 2.80, indicating the reliability viewpoint of the design methodologies. The average values are somehow low compared to the target values of reliability (3.0 or 3.5) applied in the calibration stage of the FIB guideline. In this way, the partial safety factors may change in the forthcoming guideline revisions. For this aim, the reliability of strengthening ratio was applied to assess the variation in the average value of the reliability index with different partial safety factors. The performance of parametric study for the factor proved that minimum values of 1.60 and 2.32 are required for target values of reliability (3.0 and 3.5), respectively.

• The Korean Journal of Health Service Management
• /
• v.6 no.4
• /
• pp.279-294
• /
• 2012

The study compared refractive surgery patients' hospital selection factors and satisfaction, through this to see the factors influencing patients' satisfaction, aiming at 235 patients visiting two Eye hospitals. The research results are followed. First, target group's hospital selection factors appeared facilities and environment factor, reliability factor, personal service factor, and accessibility factor in the order. Second, patients' satisfaction appeared reliability factor, facilities and environment factor, and personal factor in the order. Fourth, in the result comparing patients' expectation on hospital selection and satisfaction score, all factors of facilities and environment, personal service, and reliability had high satisfaction score than expectation. Third, in the result of factors influencing refractive surgery patients' satisfaction, in surgery determination period, surgery expenditure, and hospital selection factors among characteristics relating to refractive surgery, facilities and environment, personal service, and reliability appeared as satisfaction influencing factors. In conclusion, the study found that hospital selection factors and satisfaction influencing factors by refractive surgery patients' surgery type are considered to be able to be used to establish marketing strategy in the fields excluded from insurance application, the researches to improve patients' satisfaction in patient-oriented medical market should be continuously proceeded.

• Asia Marketing Journal
• /
• v.16 no.1
• /
• pp.117-132
• /
• 2014

This study examined the use of Facebook in United Arab Emirates. There were two objectives of this study. The first purpose was to identify the motive for the use of Facebook among people in U.A.E. This study conducted the survey using both qualitative and quantitative methods. One hundred eighty-three working people were used from the survey. Thirty-five questions identified from the interviews were used for the questionnaire design in quantitative method. Factor analysis showed six factors namely usefulness, usage, reliability, making new friends, ethical issue and openness of information. The total variance explained by all the factors was fifty-two percent. This study also examined the demographic variables whether they would play an important role in using the social network site. The study included two more variables, income and married status, which were not frequently examined by previous studies. MANOVA showed statistical significant differences (p < .01) across six factors. ANOVA results showed that gender variable affected only the factor of openness of information. Males were more likely to share their information compared to females. Income variable affected all the factors except the openness of information. The results showed that high-income people had the highest meanscores on three factors (usage, reliability, making new friends) while low-income people had the highest means on usefulness and ethical factors.Marital status had significant effects on usefulness, reliability, and ethical factors. Married people had the low scores on reliability and ethical factors. Lastly, education variable had no effect on all the factors examined.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.427-434
• /
• 2010

Load Resistance Factor Design method is used increasingly in geotechnical design world widely and resistance factors for drilled shafts are suggested by AASHTO. However, these resistance factors are determined for intact rock conditions, by comparison most of bedrocks in Korea are weathered condition, so that applying the AASHTO resistance factors is not reasonable. Thus, this study suggests the proper resistance factors for design of drilled shaft in Korea. The 22 cases of pile load test data from 8 sites were chosen and reliability-based approach is used to analyze the data. Reliability analysis was performed by First Order Second Moment Method (FOSM) applying 4 bearing capacity equations. As a result, when the Factor of Safety(FOS) were selected as 3.0, the target reliability index($\beta_c$) were evaluated about 2.01~2.30. Resistance factors and load factors are determined from optimization based on above results. The resistance factors ranged between 0.48 and 0.56 and load factor for dead load and live load are evaluated approximately 1.25 and 1.75 respectively. However, when the target reliability are considered as 3.0, the resistance factors are evaluated as approximately 50% of results when the target reliability index were 2.0.

• Journal of Korea Multimedia Society
• /
• v.14 no.6
• /
• pp.802-812
• /
• 2011

In this paper, we derived 7 reliability measurement factors for effective web site construction through literature research and empirically measured reliability of the web site using "Xenu" and "Yslow" which are reliability measurement tools. We selected and tested total 12 domestic and foreign web sites. As a result of measuring those 12 web sites, the reliability level was varied in a number of aspects according to 7 measurement factors, and we suggested alternatives based on those 7 factors in order to build the effective web site.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.458-464
• /
• 2020

Calibration of load-resistance factors for the limit state design of perforated caisson breakwaters are presented. Reliability analysis of 12 breakwaters in nationwide ports was conducted. Then, partial safety factors and load-resistance factors were sequentially calculated according to target reliability index. Load resistance factors were optimized to give one set of factor for limit state design of breakwater. The breakwaters were redesigned by using the optimal load resistance factor and verified whether reliability indices larger than the target value. Finally, some load-resistance factors were proposed by changing target reliability index.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.948-958
• /
• 2022

Since reliability and security of man-machine system increasingly depend on reliability of human, human reliability analysis (HRA) has attracted a lot of attention in many fields especially in nuclear engineering. Dependence assessment among human tasks is a important part in HRA which contributes to an appropriate evaluation result. Most of methods in HRA are based on experts' opinions which are subjective and uncertain. Also, the dependence influencing factors are usually considered to be constant, which is unrealistic. In this paper, a new model based on Dempster-Shafer evidence theory (DSET) and fuzzy number is proposed to handle the dependence between two tasks in HRA under uncertain and dynamic situations. First, the dependence influencing factors are identified and the judgments on the factors are represented as basic belief assignments (BBAs). Second, the BBAs of the factors that varying with time are reconstructed based on the correction BBA derived from time value. Then, BBAs of all factors are combined to gain the fused BBA. Finally, conditional human error probability (CHEP) is derived based on the fused BBA. The proposed method can deal with uncertainties in the judgments and dynamics of the dependence influencing factors. A case study is illustrated to show the effectiveness and the flexibility of the proposed method.

• Journal of Information Technology Services
• /
• v.23 no.2
• /
• pp.99-116
• /
• 2024

Recently, interest in ChatGPT has been increasing. This study investigated the factors influencing the satisfaction of users using ChatGPT service, a chatbot system based on artificial intelligence technology. This paper empirically analyzed causality between the four major factors of service quality, system quality, information quality, and security as independent variables and user satisfaction of ChatGPT as dependent variable. In addition, the mediating effect of reliability between the independent variables and user's satisfaction was analyzed. As a result of this research, except for information quality, among the quality factors, security and reliability had a positive causality with use satisfaction. Reliability played a mediating role between quality factors, security, and user satisfaction. However, among quality factors, the mediating effect of reliability between service quality and user's satisfaction was not significant. In conclusion, in order to increase user satisfaction with new technology-based services, it is important to create trust among users. The research results sought to emphasize the importance of user trust in establishing development and operation strategies for artificial intelligence systems, including ChatGPT.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.25-30
• /
• 2002

The problem of qualitative reliability system is very important issue in the digitalized nuclear power plant, because the failure of its system brings about extravagant economic loss, extensive environment destruction, and fatal damage of human. Therefore this study is to develop the reliability evaluation model through the normalized scoring model by the quantitative and qualitative factors considering the advanced safety factors In the Advanced Pressurized water Reactor 1400MWe(APR 1400) under uncertainty Especially, the qualitative factors considering the information and human factors for the systematic and rational justification have been closely analyzed. The reliability evaluation model can be simply applied in real fields in order to minimize the industrial accident and human error in the digitalized nuclear power plant.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.2
• /
• pp.1-14
• /
• 1997

In conventional probability-based human reliability analysis, the basic human error rates are modified by experts to consider the influences of many factors that affect human reliability. However, these influences are not easily represented quantitatively, because the relation between human reliability and each of these factors in not clear. In this paper, the relation is expressed quantitatively. Furthermore, human reliability is represented by error possibilities proposed by Onisawa, which is a fuzzy set on the interval [0,1]. Fuzzy reasoning is used in this method in order to obtain error possibilities. And, it is supposed that many basic events affected by the above factors are connected to the top event through Fault Tree structure, and an estimate of the top event expressed by a member- ship function is obtained by using the fuzzy measure and fuzzy integral. Finally, a numerical example of human reliability analysis obtained by this method is given.