• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.34-41
• /
• 2021

The purpose of this research is to improve analysis methods of determining the contents of fatty acids in infant formulas and follow-up formulas. A gas chromatography (GC) method was performed on a GC system coupled to flame ionization detector, with a fused silica capillary column (SP2560, 100 m×0.25 mm, 0.20 ㎛). The method was validated using standard reference material (SRM, NIST 1849a). Performance parameters for method validation such as specificity, linearity, limits of detection (LOD) and quantification (LOQ), accuracy and precision were examined. The linearity of standard solution with correlation coefficient was higher than 0.999 in the range of 0.1-5 mg/mL. The LOD and LOQ were 0.01-0.06 mg/mL and 0.03-0.2 mg/mL, respectively. The recovery using standard reference material was confirmed and the precision was found to be between 0.8% and 2.9% relative standard deviation (RSD). Optimized methods were applied in sample analysis to verify the reliability. All the tested products had acceptable contents of fatty acids compared with component specification for nutrition labeling. The result of this research will provide efficient experimental information and strengthen the management of nutrients in infant formula and follow-up formula.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.14-25
• /
• 2021

With the spread of COVID-19 and the government policy of social distancing, the demand for subways and buses is decreasing, whereas the demand for public bicycles and personal transportation is increasing. Hence, research is needed to understand the characteristics of this phenomenon and to prove the statistical reliability of the correlation between the subway and shared bicycle demands. In this study, the correlation between the number of confirmed COVID-19 cases and the replacement rate of subway and public bicycle demands was examined, but the statistical significance was not significant. However, during the period of September to December 2020, in which the number of confirmed COVID-19 cases in Seoul started to increase rapidly, there was a correlation between the number of confirmed COVID-19 cases and the replacement ratio. If the number of confirmed COVID-19 cases increases by more than a certain number, public bicycles are expected to play a significant role as alternates to the subways. It is expected that the role of public bicycles will increase, and that it is possible to suggest the direction of transportation operation and policy establishment for the continuation of COVID-19 countermeasures in field demonstration after elementary technology development. It is also expected that this study will suggest a direction for future development and policymaking.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.603-609
• /
• 2022

The dose distribution in the human body was evaluated and analyzed through dosimetry data using water phantom, ionization chamber and simulated by Monte Carlo simulation for ^99mTc and ¹⁸F sources, which are frequently used in the nuclear medicine in this study. As a result of this study, it was found that the dose decreased exponentially as the distance from the radioisotope increased, and it particularly showed a tendency to decrease sharply when the radioisotope was separated by 5 cm. It means that a large amount of dose is delivered to an organ located within 4 cm of source's movement path when a source uptake in the human body. Numerically, it was formed in the rage of 0.16 to 2.16 pC/min for ^99mTc and 0.49 to 9.29 pC/min for ¹⁸F. In addition, the energy transfer coefficient calculated using the result was found to be similar to the measured value and the simulation value in the range of 0.240 to 0.260. Especially, when the measured data and the simulation value were compared, there was a difference is within 2%, so the reliability of the data was secured. In this study, the distribution of radiation generated from a source was calculated to quantitatively evaluate the internal dose by radioisotopes. It presented reliable results through comparative analysis of the measurement value and simulation value. Above all, it has a great significance to the point that it was presented by directly measuring the distribution of radiation in the human body.

• Education of Primary School Mathematics
• /
• v.25 no.4
• /
• pp.279-295
• /
• 2022

This study was conducted to present implications for mathematics education by identifying the structural relationship among personality, negative emotion, motivation, and career maturity that affects elementary school student's mathematical academic achievement. The participants conveniently sampled 179 students, from 4th to 6th graders enrolled in the same elementary school, and data on their psychological variables were collected in the form of secondary data. The hypothetical structural equation model established based on prior studies was verified with a two-stage approach based on the collected data. It was confirmed that construct validity and construct reliability were secured through assessing the measurement model. In addition, as a result of analyzing the path coefficient of the final structural equation model, five paths were found to be significant: 'personality→motivation', 'personality→career maturity', 'negative emotion→motivation', and 'negative motivation→mathematical academic achievement'. In particular, the path of 'negative emotion→negative motivation→mathematics academic achievement' that can be confirmed through the results needs to moderate negative emotions to improve mathematical academic achievement, and at this time, negative motivation should be considered together.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.85-94
• /
• 2022

This retrospective study aimed to evaluate the difference in measurement between conventional orthodontic analysis and artificial intelligence orthodontic analysis in pediatric and adolescent patients aged 7 - 15 with the mixed and permanent dentition. A total of 60 pediatric and adolescent patients (30 mixed dentition, 30 permanent dentition) who underwent lateral cephalometric radiograph for orthodontic diagnosis were randomly selected. Seventeen cephalometric landmarks were identified, and 22 measurements were calculated by 1 examiner, using both conventional analysis method and deep learning-based analysis method. Errors due to repeated measurements were assessed by Pearson's correlation coefficient. For the mixed dentition group and the permanent dentition group, respectively, a paired t-test was used to evaluate the difference between the 2 methods. The difference between the 2 methods for 8 measurements were statistically significant in mixed dentition group: APDI, SNA, SNB, Mandibular plane angle, LAFH (p < 0.001), Facial ratio (p = 0.001), U1 to SN (p = 0.012), and U1 to A-Pg (p = 0.021). In the permanent dentition group, 4 measurements showed a statistically significant difference between the 2 methods: ODI (p = 0.020), Wits appraisal (p = 0.025), Facial ratio (p = 0.026), and U1 to A-Pg (p = 0.001). Compared with the time-consuming conventional orthodontic analysis, the deep learning-based cephalometric system can be clinically acceptable in terms of reliability and validity. However, it is essential to understand the limitations of the deep learning-based programs for orthodontic analysis of pediatric and adolescent patients and use these programs with the proper assessment.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.91-100
• /
• 2023

This study is a case study comparing and examining the effects of non-face-to-face(NFTF) classes in the 2021-2 semester and face-to-face(FTF) classes in the 2022-2 semester on learning immersion, learning stress, and learning satisfaction. The learning immersion and learning satisfaction of 240 students were analyzed in NFTF and FTF classes of department S of C junior college where the same textbook, same subject, and same professor were taught. For data processing, SPSS Ver. 23.0 was used. The data is used to measure reliability by Cronbach's α, t-test, Pearson's correlation coefficient, and multiple regression analysis. The results of this study are as follows. First, learners' learning immersion was higher in FTF than NFTF classes among engineering major subjects. Second, it was found that there was a difference in learning stress according to the types of FTF and NFTF classes in engineering major subjects. Third, it was found that there were differences in practice content, communication, and task performance of sub-factors of learning satisfaction according to FTF and NFTF class types in engineering major subjects. In conclusion, it was found that FTF classes had a more positive effect on learning immersion and satisfaction, and NFTF classes had a more negative effect on learning stress.

• Journal of the Korean earth science society
• /
• v.44 no.4
• /
• pp.318-330
• /
• 2023

This study aimed to verify the validity of a measurement tool for Vietnamese high school students' systems thinking abilities. Two quantitative assessment tools, the Systems Thinking Measuring Instrument (Lee et al., 2013) and the Systems Thinking Scale (Dolansky et al., 2020), were used to measure students' systems thinking after translation into Vietnamese. As a result, it was revealed that Cronbach-α for each tool (i.e., STMI and STS) was .917 and .950, respectively, indicating high reliability for both. To validate the construct validity of the translated questionnaire, exploratory factor analysis was performed using SPSS 26.0, and confirmatory factor analysis was performed using AMOS 21.0. For concurrent validity, correlation analysis using structural equation modeling was performed to validate the translated questionnaire. Exploratory factor analysis revealed that 10 items from the STMI and 12 items from the STS loaded on the intended factors and appropriate factor loading values were obtained. For confirmatory factor analysis, a structural equation model organized with 10 items from the STMI and 12 items from the STS was used. The result of this showed that the convergent validity values of the model were all appropriate, and the model fit indices were analyzed to be χ²/df of 1.892, CFI of .928, TLI of .919, SRMR of .047, and RMSEA of .063, indicating that the model consisting of the 22 items of the two questionnaires was appropriate. Analysis of the concurrent validity of the two tools indicated a high correlation coefficient (.903) and high correlation (.571-.846) among the subfactors. In conclusion, both the STMI and STS are valid quantitative measures of systems thinking, and it can be inferred that the systems thinking of Vietnamese high-school students can be quantitatively measured using the 22 items identified in our analysis. Using the tool validated in this study with other tools (e.g., qualitative assessment) can help accurately measure Vietnamese high school students' systems thinking abilities. Furthermore, these tools can be used to collect evidence and support effective education in ODA projects and volunteer programs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.70-77
• /
• 2023

Fine dust is a cause of serious ecological problems, and fugitive dust generated from construction sites is a major source of fine dust in Korea. However, at construction sites, including concrete manufacturing industry sites, measurements are rarely made at the fugitive dust generation stage, and passive removal methods are the majority. Therefore, in this study, a fugitive dust measurement method suitable for managing fugitive dust generated during aggregate unloading in the concrete manufacturing industry sites was selected. In addition, the purpose was to analyze the amount of fugitive dust reduction according to the operation of the reduction system by applying the automatic fugitive dust reduction system to the aggregate unloading site. As a result, the reliability of the light scattering method was secured through the comparative measurement of the beta-ray absorption method and the light scattering method, and the light scattering method correction coefficient was calculated and applied to the measured value of the fugitive dust particle mass concentration at the concrete manufacturing industry sites. In addition, the fugitive dust reduction rate according to the operation of the automatic fugitive dust reduction system was derived.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.137-148
• /
• 2023

This study investigated the influence of major satisfaction on learning flow and self-efficacy of students majoring in culinary arts at local junior colleges. In the 2022-2 semester, 260 freshmen and sophomore college students majoring in culinary from five junior colleges in the Gwangju and Jeonnam regions were analyzed. For data processing, SPSS Ver. 25.0 was used. The data is used to measure reliability by Cronbach's α, t-test, ANOVA, Pearson's correlation coefficient, and multiple regression analysis. The results of this study are as follows : First, there was a difference in satisfaction between freshmen and sophomores in major satisfaction with cooking related departments at local junior colleges. Second, there was a significant effect of satisfaction with cooking-related majors at local junior colleges on learning immersion. Third, there was a significant effect of satisfaction with cooking-related majors at local junior colleges on self-efficacy. In conclusion, it was found that major satisfaction affects learning immersion and self-efficacy for both students enrolled in cooking-related departments at local junior colleges. In the future, we suggest follow-up research on educational measures to increase learning immersion and self-efficacy for students who are not majoring in cooking in the high school curriculum and students who are insufficient in major classes due to part-time jobs during the semester.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.357-363
• /
• 2009

When yields the mean velocity of the closed conduit which is used generally, it is available to use Darcy Weisbach Friction Loss Head equation. But, it is inconvenient very because Friction Loss coefficient f is the function of Reynolds Number and Relative roughness (${\varepsilon}$/d). So, it is demanded more convenient equation to estimate. In order to prove the reliability and an accuracy of Chiu's velocity equation from the research which sees hereupon, proved agreement very well about measured velocity measurement data by using Laser velocimeter which is a non-insertion velocity measuring equipment from the closed conduit (Laser Doppler Velocimeter: LDV) and an insertion velocity measuring equipment and the Pitot tube which is a supersonic flow meter (Transit-Time Flowmeters). By proving theoretical linear-relation between maximum velocity and mean velocity in laboratory flume without increase and decrease of discharge, the equilibrium state of velocity in the closed conduit which reachs to equilibrium state corresponding to entropy parameter M value has a trend maintaining consistently this state. If entropy M value which is representing one section is determinated, mean velocity can be gotten only by measuring the velocity in the point appearing the maximum velocity. So, it has been proved to estimate simply discharge and it indicates that this method can be a theoretical way, which is the most important in the future, when designing, managing and operating the closed conduit.