• Journal of Hydrogen and New Energy
• /
• v.31 no.1
• /
• pp.73-81
• /
• 2020

For the fault tree analysis (FTA) analysis of the packaged hydrogen filling station, the composition of the charging station was analyzed and the fault tree (FT) diagram was prepared. FT diagrams were created by dividing the causes of events into external factors and internal factors with the hydrogen event as the top event. The external factors include the effects of major disasters caused by natural disasters and external factors as OR gates. Internal factors are divided into tube tailer, compressor & storage tank, and dispenser, which are composed of mistakes in operation process and causes of accidents caused by parts leakage. In this study, the purpose was to improve the hydrogen station. The subjects of this study were domestic packaged hydrogen stations and FTA study was conducted based on the previous studies, failure mode & effect analysis (FMEA) and hazard & operability study (HAZOP). Top event as a hydrogen leaking event and constructed the flow of events based on the previous study. Refer to "Off shore and onshore reliability data 6th edition", "European Industry Reliability Data Bank", technique for human error rate prediction (THERP) for reliability data. We hope that this study will help to improve the safety and activation of the hydrogen station.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.155-160
• /
• 1997

The conventional fault tree and reliability analysis gives in many cases insufficient information concerning the relative frequencies of hazard events. This stems from that the basic events are not stationary and ergodic, and therefore the tolerances of the induced and top events cannot be calculated reliably based on the classical probability theory. To overcome this difficulty, the paper considers the relative frequencies of the basic events as fuzzy numbers and uses instead of probability, possible considerations for evaluating the mean values and tolerances of the top events. The possibility distribution of the basic events can be approximated based on heuristic considerations. This paper shows the use of these operators for constructing fault trees. The use of the method for numerical calculation is demonstrated on a field safety problem.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.87-92
• /
• 2010

Urban transit system must secure fast, safe and reliable transportation capacity as a metropolitan mass transit. For this purpose, it is important to make all the sub-systems (which consist of EMU, power feeding, signaling & telecommunication, railway, platform facility, and control system and so on) work well. To operate all the systems effectively and reliably, a maintenance measure optimal to each system's characteristics is needed to be established and executed. So, highly reliable maintenance should be performed. But, EMU maintenance methods suitable to its own model and EMU lines are not yet introduced. This study examined few examples mainly to secure reliability on a maintenance quality in operating method and the features of train maintenance system based on travel distance.

• Journal of Hydrogen and New Energy
• /
• v.19 no.4
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1288-1290
• /
• 2003

The maintenance CALS system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance CALS system from 2001 to 2005. The RAMS for management computerization system are utilized in a variety of CALS system for user's convenience and safety in maintenance. Ever since its inception though, the urban transit has searched for ways to improve reliability, availability, maintainability and safety of the railway subsystem. In this paper, This system include RAMS(reliability, availability, maintainability and safety) and expert system of the vehicles shall be enhanced in the future.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1463-1472
• /
• 2008

The present paper to relate with the maintenance of the high-speed vehicle, KTX and is to treat a reliability evaluation. The reliability of the high-speed vehicle while operating between-failure average mileage (MKBSF) and parts between-failure average mileage (MKBF), 1,000,000 per km service failure number of items and availability and per km evaluated a maintenance expense. The reliability evaluation results and 2007 year reliability management indexes compared in 2006 years and they improved, per km the maintenance expense compared at 2006 and 36.6% was decreased. Reliability management activity leads and availability of the high-speed vehicle, safety improves and with the fact that will be able to decrease the maintenance expense which is an economic scale of railroad service is expected.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.249-259
• /
• 2020

Design criteria for limit state design of underground structures have already been published overseas, and research has been conducted to revise the design method in Korea. In order to estimate the probability of failure under seismic load, the probability variable should be considered in the reliability analysis. In this study, the failure probability of the existing shield tunnel segment lining design was calculated by applying the coefficient of variation (COV) for the earth pressure and the seismic load effect in consideration of the statistical characteristics of the domestic ground properties. Based on the results of calculating the reliability index (β) from the calculated probability of failure and analyzing the reliability index according to the change in the load factor and the results of domestic and foreign research, the target reliability index (β_T) during earthquakes of shield tunnel segment lining is analyzed to be "2.3", it was proposed as the target reliability index for the design of the limit state under seismic load.

• Journal of Korean Society for Quality Management
• /
• v.45 no.3
• /
• pp.365-377
• /
• 2017

Purpose: In the A rotorcraft, the division of a long yaw control rod was studied to improve the heat treatment capability. The purpose of this study was to analyze whether division of yaw control rod affects quality reliability in the A rotorcraft and analyze whether it secured flight safety. Methods: The structural static test and the vibration durability test on the split shape of yaw control rod were carried out in order to examine and verify the existing structural analysis results. Results: Structural static test results showed that there were no cracks and vibration durability test results showed that there was no damage or breakage on the split yaw control rod. Conclusion: This study showed that the quality reliability was confirmed and thus the flight safety of the A rotorcraft was secured. And it is expected that the split technique of the yaw control rod will contribute to the development of the rotorcraft industry in the future.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.207-215
• /
• 2015

Safety' can be used in a variety of ways and may also have different meanings when used in theoretical field and routinely used. In this paper, the 'safety' means that human injury, fire or physical accident condition does not occur while used by the end-user. The meaning of safety may be different by era and culture. Even in contemporary era, the meaning can be used differently by country, region and culture. As the rights of consumers are increasingly reinforced, we can expect the acceptable risk or safety level can rise higher. In this paper, the R-map of Japan and the European risk assessment guidelines (RAPEX) were reviewed considering domestic incidents database status and its applicability. Because it is difficult to make a model based on a R-map, a revised model was developed mainly based on European Assessment Model with a combination of the important characteristics of Japan model R-map. Also utilizing this revised model, the availability as a new risk assessment model was confirmed by comparing the test results for the same scenarios to the other risk assessment model (RAPEX/RAG).