• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.62-68
• /
• 2016

The feeder cable assembly is an automotive part used for telecommunication. If it malfunctions, the control and safety of the automobile can be put at risk. ALT (Accelerated Life Testing) is a testing process for products in which they are subjected to conditions (stress, strain, temperatures, etc.) in excess of their normal service parameters in an attempt to uncover faults and potential modes of failure in a short amount of time. Failure is caused by defects in the design, process, quality, or application of the part, and these defects are the underlying causes of failure or which initiate a process leading to failure. Thermal shock occurs when a thermal gradient causes different parts of an object to expand by different amounts. Thermal shock testing is performed to determine the ability of parts and components to withstand sudden changes in temperature. In this research, the main causes of failure of the feeder cable assembly were snapping, shorting and electro-pressure resistance failure. Using the Coffin-Manson model for ALT, the normal conditions were from Tmax = $80^{\circ}C$ to Tmin = $-40^{\circ}C$, the accelerated testing conditions were from Tmax = $120^{\circ}C$ to Tmin = $-60^{\circ}C$, the AF (Acceleration Factor) was 2.25 and the testing time was reduced from 1,000 cycles to 444 cycles. Using the Bxlife test, the number of samples was 5, the required life was B0.04%.10years, in the acceleration condition, 747 cycles were obtained. After the thermal shock test under different conditions, the feeder cable assembly was examined by a network analyzer and compared with the Weibull distribution modulus parameter. The results obtained showed good results in acceleration life test mode. For the same reliability rate, the testing time was decreased by a quarter using ALT.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1086-1092
• /
• 2012

It has been studied for DGPS/INS(Differential Global Positioning System/Inertial Navigation System) to offer the more precise and reliable navigation data with the aviation industry development. The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system, as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is performed by comparing between the DGPS/INS navigation data and reference trajectory which is more precise than DGPS/INS. The GPS receiver, which is capable of post-processed CDGPS(Carrier-phase DGPS) method, can be used as reference system. Generally, the DGPS/INS is estimated the CG(Center of Gravity) point of aircraft while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. For this reason, estimated error between DGPS/INS and reference system will include the error due to lever arm. In order to more precise performance evaluation, it is needed to compensate the lever arm. This paper presents procedure and result of flight test which includes lever arm compensation in order to verify reliability and performance of DGPS/INS more precisely.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.35-43
• /
• 2024

Numerous methods have been applied to assess the antibacterial effectiveness of hand hygiene products. However, the different results obtained through various evaluation methods have complicated our understanding of the real efficacy of the products. Few studies have compared test methods for assessing the efficacy of hand hygiene products. In particular, reports on ex vivo pig skin testing are limited. This study aimed to compare and characterize the methodologies applied for evaluating hand hygiene products, involving in vitro, ex vivo, and in vivo approaches, applicable to both leave-on sanitizers and wash-off products. Our further aim was to enhance the reliability of ex vivo test protocols by identifying influential factors. We performed an in vitro method (EN1276) and an in vivo test (EN1499 and ASTM2755) with at least 20 participants, against Serratia marcescens or Escherichia coli and Staphylococcus aureus. For the ex vivo experiment, we used pig skin squares prepared in the same way as those used in the in vivo test method and determined the optimal treated sample volumes for sanitizers and the amount of water required to wash off the product. The hand sanitizers showed at least a 5-log reduction in bacterial load in the in vitro test, while they showed little antibacterial activity in the in vivo and ex vivo tests, particularly those with a low alcohol content. For the hand wash products, the in vitro test was limited because of bubble formation or the high viscosity of the products and it showed low antibacterial activity of less than a 1-log reduction against E. coli. In contrast, significantly higher log reductions were observed in ex vivo and in vivo tests, consistently demonstrating these results across the two methods. Our findings revealed that the ex vivo and in vivo tests reflect the two different antibacterial mechanisms of leave-on and wash-off products. Our proposed optimized ex vivo test was more rapid and more precise than the in vitro test to evaluate antibacterial results.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.431-439
• /
• 2016

This paper dealt with contents of the quality evaluation method of lattice girder utilizing non-destructive method. Quality evaluation of ordinary lattice girder is performed through the tensile strength test of structural steel and visual inspection. The tensile strength test of structural steel is performed by collecting samples of lattice girder brought into the site, during which lattice girder must be damaged to obtain sample. In addition to such disadvantage, tensile strength tester is not available at the site in most cases, requiring an inconvenient service from test certification agency. In addition, it is substituted by mile sheet issued during the production of structural steel, which inevitably lacks reliability. Furthermore, visual inspection at the site entails a problem of lack of reliability, thereby requiring a method of easily and quickly evaluating the quality of lattice girder without damaging the material. Accordingly, this study comparatively analyzed the yield strength of tensile strength test and the yield strength of instrumented indentation test with same sample. The test results ensured over 95% precision level for the instrumented indentation test, based on which a quality evaluation method based on instrumented indentation test that allowed onsite direct quality evaluation is proposed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.53-64
• /
• 2009

Inter-vehicular communication that propagates information without infrastructures has drawn a lot of interest. However, it is difficult to apply conventional ad-hoc routing protocols directly in inter-vehicular communication due to frequent changes in the network topology caused by high mobility of the vehicles. MMFP(Multi-hop MAC Forwarding) is a unicast forwarding protocol that transport packets based on the reachability information instead of path selection or position information. However, delivering public safety messages informing road conditions such as collision, obstacles and fog through inter-vehicular communication requires broadcast rather than unicast since these messages contain information valuable to most drivers within a close proximity. Flooding is one of the simplest methods for multi-hop broadcast, but it suffers from reduced packet delivery-ratio and high transmission delay due to an excessive number of duplicated packets. This paper presents two multi-hop broadcast protocols for inter-vehicular communication that extend the MMFP. UMHB(Unreliable Multi-Hop Broadcast) mitigates the duplicated packets of MMFP by limiting the number of nodes to rebroadcast packets. UMHB, however, still suffers from low delivery ratio. RMHB(Reliable Multi-Hop Broadcast) uses acknowledgement and retransmission in order to improve the reliability of UMHB at the cost of increase in transmission delay, which we show through simulation is within an acceptable range for collision avoidance application.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.191-198
• /
• 2008

Flow accelerated corrosion (FAC) phenomenon of low alloy carbon steels in nuclear power plant has been known as one of major degradation mechanisms. It has a potential to cause nuclear pipe rupture accident which may directly impact on the plant reliability and safety. Recently, the equipotential switching direct current potential drop (ES-DCPD) method has been developed, by the present authors, as a method to monitor wall loss in a piping. This method can rapidly monitor the thinning of piping, utilizing either the wide range monitoring (WiRM) or the narrow range monitoring (NaRM) technique. WiRM is a method to monitor wide range of straight piping, whereas NaRM focuses significantly on a narrow range such as an elbow. WiRM and NaRM can improve the reliability of the current FAC screening method that is based on computer modeling on fluid flow conditions. In this paper, the measurements by ES-DCPD are performed with signal sensitivity analyses in the laboratory environment for extended period and showed the viability of ES-DCPD for real plant applications.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.67-79
• /
• 2016

Purpose - Over recent years, we have concerned about safety and quality on food products because of delivery complexity. The dependence of foreign food products escalate supply of products. And there are often negligent accident of marine and agricultural products. Therefore, the complexity increases the importance of safety on food and information quality for consumers. In spite of the interest augmentation of various interested parties, there is decrease in reliability and effectiveness, if it would be established without the right directivity. For the study, we tried to examine the first considerations the point of - view in service environment and information quality with accepting and diffusing the Traceability System. Then, we tried to verify the relationships between the factors of TS and the determinants of behavior decision. Next, we made efforts to find the mutual relationship among distributors, producers, consumers and the other prerequisite factors from the point of view in service environment and information quality in order to operate effectively the information perspective and system. Research design, data, and methodology - For the purpose of this study, the samples of consumers were targeted to Traceability System, and 661 people have been investigated. Through theoretical discussion of previous research, nine hypotheses were established, the influence of Continuous User Intention in TS. In order to test the hypotheses, a survey had conducted for 661 consumers as opinion leaders in their 20s-60s as data, and structural equation modeling was used. The difference analysis between Agricultural and Marine Products in TS; SPSS 22.0 and AMOS 22.0 were used for statistical analysis. Results - The major findings from this study were as follow; all factors of information quality excluding completeness and a social-impact had effects on the ease of use; all factors excluding understand ability in information quality and a social-impact had effects on the usefulness; completeness and social-impact had effects on perceived value; the ease of use had effects on usefulness and perceived value; usefulness had effects on perceived value and the intention of continuous use. From the results of different analysis, the CPLT(Completeness) factor has positive effects on Easy of USE and PV(Perceived Value) strongly in agricultural products. On the other hand, Social Duty has positive effects on Easy of Use strongly in marine products. Conclusion - In the age of information overflowing, TS will be a burden for users if it places too much emphasis upon accessibility. To accept and diffuse TS safely, therefore, Information System should be settled first into initial market formation. In addition, if TS elements are considered in conjunction with information factors and user environment, the acceptance and diffusion of TS would make synergy effect, even better. That is, this study contributes to the acceptance and diffusion of Traceability System. Accordingly, information quality will be settled into initial market formation. Also, social-impact element will be considered in conjunction with information quality's factors, and it will make synergy effect.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.27-31
• /
• 2006

GNSS Services and Applications are today in permanent evolution in all the market sectors. This evolution comprises: ${\bullet}$ New constellations and systems, being GALILEO probably the most relevant example, but not the only one, as other regions of the world also dwell into developing their own elements (e.g. the Chinese Beidou system). ${\bullet}$ Modernisation of existing systems, as is the case of GPS and GLONASS ${\bullet}$ New Augmentation services, WAAS, EGNOS, MSAS, GRAS, GAGAN, and many initiatives from other regions of the world ${\bullet}$ Safety of Life services based on the provision of integrity and reliability of the navigation solutions through SBAS and GBAS systems, for aeronautical or maritime applications ${\bullet}$ New Professional applications, based on the unprecedented accuracies and integrity of the positioning and timing solutions of the new navigation systems with examples in science (geodesy, geophysics), Civil engineering (surveying, construction works), Transportation (fleet management, road tolling) and many others. ${\bullet}$ New Mass-market applications based on cheap and simple GNSS receivers providing accurate (meterlevel) solutions for daily personal navigation and information needs. Being on top of this evolving market requires an active participation on the key elements that drive the GNSS development. Early access to the new GNSS signals and services and appropriate testing facilities are critical to be able to reach a good market position in time before the next evolution, and this is usually accessible only to the large system developers as the US, Europe or Japan. Jumping into this league of GNSS developers requires a large investment and a significant development of technology, which may not be at range for all regions of the world. Bearing in mind this situation, MAGIC appears as a concept initiated by a small region within Europe with the purpose of fostering and supporting the development of advanced applications for the new services that can be enabled by the advent of SBAS systems and GALILEO. MAGIC is a low cost platform based on the application of technology developed within the EGNOS project (the SBAS system in Europe), which encompasses the capacity of providing real time EGNOS and, in the near future, GALILEO-like integrity services. MAGIC is designed to be a testing platform for safety of life and liability critical applications, as well as a provider of operational services for the transport or professional sectors in its region of application. This paper will present in detail the MAGIC concept, the status of development of the system within the Madrid region in Spain, the results of the first on-field demonstrations and the immediate plans for deployment and expansion into a complete SBAS+GALILEO regional augmentation system.

• The Korean Journal of Community Living Science
• /
• v.20 no.3
• /
• pp.397-411
• /
• 2009

The use of local product foods and fresh-cut products, the dietitian's recognition, the required items and the quality for school foodservice was investigated to increase the consumption of high-quality agricultural products. Data from 578 elementary schools, 228 middle schools and 116 high schools were collected by school foodservice personnels in each regional Education Administration in Gyeong-gi province. The first criteria of buying food materials was reliability/safety for all school foodservice. The second criteria were the origin of the product and freshness/ripeness for elementary and middle schools and high school, respectively. The most important consideration for selecting a supplier was the quality of the material. The appearance/status of the food was the first factor for buying food materials. The origin and the seasonality were very important for buying farm products. Dietitians in Gyeong-gi province recognized the local products, and used them weekly. The advantages of using local products were the quick supply, freshness and safety. On the other hand, the disadvantages were the lack of information and the uncertainty of supply. Sixty eight percent of the subjects had experienced the high-quality agricultural products in school meals, but the frequency was low. The main reasons for not servicing high-quality agricultural products were the high cost and the lack of trust on the quality. Among fresh-cut products, seasonings and root vegetables were purchased most frequently, but leaf vegetables was 5.7% only. The purchase of fresh-cut products was not frequent, but usually satisfied. The advantages of fresh-cut products were the reduced workload and waste, but the reason for not using them were poor hygiene and the high price. The diverse supply system and the promotion of the local product foods would be necessary since the most food materials were purchased through suppliers. In addition, the problems related to the high cost and distrust should be resolved to expand the consumption of the high-quality agricultural products and the fresh-cut vegetables. The institutions for certifying the quality should be needed to increase the confidence of these products.