• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.547-556
• /
• 2013

Control chart is most widely used in SPC(Statistical Process Control), Recently it is a critical issue that the standard control chart is not suitable to non-normal process with very small percent defective. Especially, this problem causes serious errors in the reliability procurement, such as semiconductor, high-precision machining and chemical process etc. Procuring process control technique for non-normal process with very small percent defective and perturbation is becoming urgent. Control chart technique in non-normal distribution become very important issue. In this paper, we investigate on research trend of control charts under non-normal distribution.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.2038-2043
• /
• 2009

RAMS(Reliability, Availability, Maintainability, Safety) analyses are particularly important in the railway engineering sector and are increasingly required the specialized procedures. The RAMS analysis is performed to meet the high safety and quality standards. The RAMS standards were established in 1990s. EN 50126 of CENELEC, and IEC 62278 provide railway authorities and railway company with a procedure which will enable the implementation of a consistent approach to the management of RAMS. IEC 62278 will be often referred to in the field of railway system. This paper represents the RAMS procedure to apply to the EMU (Electrical Multiple Unit) based on the referenced RAMS standards.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.66-72
• /
• 1999

Local heating transportation pipe has sensor and return lines to detect water-leakage. There are impulse and resistance comparison measurement types for a water-leakage detection. The impulse type shows large detection error within a measurement range. Since the resistance comparison type can find a comparative accurate single water-leakage point in the measurement range of heating pipe, it has been used to detect water-leakages these days. However if the multi water-leakages are happened in the measurement range of transportation pipe. the resistance comparison type shows a detection error point by the parallel resistance between a detection sensor line and ground. But the detection error will be minimized by the divided transportation pipe loops. In this research, it suggests the design of remote controlled detection system which can divide a large pipe loop and a possible single water-leakage measurement process in each divided loops.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.168-174
• /
• 2001

For human error analysis, the structure and situation of a task should be analyzed in advance. The paper introduces Structured Information Analysis (SIA) as a task analysis method for error analysis, and delineates the result of application on the emergency procedure of Korean Standard Nuclear Plants (KSNPs). From the task analysis about emergency procedure of KSNP, total 72 specific task goals were identified in the level of system function, and 86 generic tasks were classified from the viewpoint of physical sameness of the task description. Human errors are dependent on task types so that the result of task analysis would be used as a basis for the error analysis on the emergency tasks in nuclear power plants.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.219-228
• /
• 2003

Today, the size of a parcel delivery service market, which is a part of logistics, at home and abroad has been extended rapidly and its growth rate is expected to increase hereafter. At this point, when service is applied strategically in a parcel delivery service, we need to understand the feature of logistics service quality by view of customer differentiation. In this study, we try to constitute a model of the feature of logistics service, which is combined five features of service quality (Responsiveness, Empathy, Reliability, Accuracy and Tangibility) based on measuring model of SERVQUAL with logistics service, and to know the feature of logistics service from parcel delivery service by jobs with statistical tool.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.45-52
• /
• 2009

In conventional structural design, deterministic optimization which satisfies codified constraints is performed to ensure safety and maximize economical efficiency. However, uncertainties are inevitable due to the stochastic nature of structural materials and applied loads. Thus, deterministic optimization without considering these uncertainties could lead to unreliable design. Recently, there has been much research in reliability-based design optimization (RBDO) taking into consideration both the reliability and optimization. RBDO involves the evaluation of probabilistic constraint that can be estimated using the RIA (Reliability Index Approach) and the PMA(Performance Measure Approach). It is generally known that PMA is more stable and efficient than RIA. Despite the significant advancement in PMA, RBDO still requires large computation time for large-scale applications. In this paper, A new reliability-based design optimization (RBDO) method is presented to achieve the more stable and efficient algorithm. The idea of the new method is to integrate a response surface method (RSM) with PMA. For the approximation of a limit state equation, the moving least squares (MLS) method is used. Through a mathematical example and ten-bar truss problem, the proposed method shows better convergence and efficiency than other approaches.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.485-497
• /
• 2021

The purpose of this study is to demonstrate the effects of authentic leadership on creativity, psychological safety, and the mediating effects of cooperative behavior in order to enhance the creativity of personnel as a means of innovation in enterprises. The hypothesis was established based on the theory and prior study of authentic leadership, creativity, psychological safety, cooperation behavior. The data collected from 353 employees of domestic enterprises were verified for reliability and validity through CFA, SPSS 25, and AMOS 25. Macro Process 3.0 was used for hypothesis testing. Verification of the hypothesis of the study model showed that authentic leadership had a significant positive effect on psychological safety, cooperation behavior and creativity, and that the mediating effect of psychological safety and cooperation behavior was also significant. The significance of this study can be found in the fact that the impact of authentic leadership has been verified based on motivation among the CMC (Componential Model of Creativity) and that it has suggested that creativity of an organization's personnel may be enhanced by changing organizational culture through leadership.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6040-6045
• /
• 2012

In this study, by utilizing the information fusion of multi sensor data and time within the crosswalk safety Assistive gait secondary to the safety of pedestrians on the system design and system performance verification through support to. Environmental awareness, and time information in addition to leveraging the default behavior for pedestrian safety design of the secondary system performed a study on the scenario and the behavior of a system for fuzzy control was performed for each sensor data processing, median filtering, including filters processing leveraging, and was attached by the time we complete the final algorithm, the system behavior. In addition, taking advantage of the sensor measurements, so basically uncertainties and sensor results, and you want to give at least the reliability of the data fusion experiment equipment using this simple verification.

• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.739-754
• /
• 2019

Purpose: The purpose of this paper is to develop a reliability estimation procedure for the underground gas pipeline in the presence of corrosion defects. Methods: Corrosion is one of the major causes of the gas pipeline failure. Several failure forms caused by corrosion have been studied. Among them, small leak and burst are considered in this paper. The composite failure of the two is defined by limit state function, and it is expressed with pipe parameters. Given a modified corrosion dataset, in order to obtain reliability estimations, the method of first order and second moment is adopted because of its simplicity. The computation processes are conducted with MATLAB coding. Results: According to numerical results, the probability of composite failure is affected by both small leak and burst. In particular, when corrosion depth stays at low level, it is consistent with the probability of burst failure. On the contrary, it is more influenced by the small leak failure as corrosion depth is increasing. In such case, the probability of composite failure is fast approaching to the safety limit. Conclusion: By considering the composite failure, more practical predictions of remaining life can be obtained. The proposed method is useful for maintenance planning of the underground gas pipeline.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.113-122
• /
• 1995

The purpose of this study is to evaluate performance and safety of structures designed according to current seismic code or provisions (e.g., Uniform Building Code(UBC), NEHRP provisions, etc.) during lifetime of structures. The performance is represented in terns of reliability in this paper. To perform reliability analyses, a large number of time history response analyses for a given structure are usually required. In this study, to perform reliability analyses ground motions are generated based on nonstationary random process and structures are designed based on UBC. In this paper, responses of structures under a given earthquake is evaluated using dynamic nonlinear time history analyses and also an equivalent nonlinear system (ENS) with response scaling factors. The ENS system is described in the companion paper. Therefore, this paper evaluates the seismic performance of structures and also verify the accuracy of ENS.