카뮤스틴 (1,3-bis(2-chloroethy1-nitrosourea, BICNU)은 뇌종양 치료를 위하여 임상적으로 사용되는 약물로 짧은 생물학적 반감기를 가지고 있어 장기방출에 적합하지 않다. 하지만, poly(D,L-lactide-co-glycolide) (PLGA)는 벌크 분해 특성으로 인해 약물의 장기방출에 유용하며, PLGA의 유도체인 글리콜라이드 단량체는 독성이 없고 PLGA와 유사한 생분해성을 가지고 있어 BICNU의 방출조절에 이용된다. 이 실험에서 BICNU를 함유한 PLGA 웨이퍼는 일반적인 직접압축법에 의해 제조한 후 BICNU의 방출거동과 웨이펴의 분해속도를 전자주사현미경, 핵자기공명장치 그리고 젤투과크로마토그래피를 통해 관찰하였다. 또한, 글리콜라이드 단량체의 함량변화에 따른 다중층 웨이퍼를 제조하여 단일층 웨이퍼와의 방출거동을 비교하였다. 이러한 결과들로부터 BICNU를 함유한 PLGA 웨이퍼의 약물방출은 BICNU와 글리콜라이드 단량체의 함량이 증가할수록 증가하였고, 다중층 웨이퍼에서 외부층의 글리콜라이드 단량체와 BICNU가 약물방출 거동과 분해속도에 영향을 미친다는 것을 확인하였다.
Kim, Cheon-Woo;Park, Jong-Kil;Ha, Jong-Hyun;Song, Myung-Jae;Lee, Nel-Son;Kong, Peter-C.;Anderson, Gary-L.
한국세라믹학회지
/
제40권10호
/
pp.936-942
/
2003
In order to develop glass formulations for vitrifying Low-and Intermediate-Level radioactive Wastes (LILW) from nuclear power plants of Korea Hydro & Nuclear Power (KHNP) Co., Ltd., promising glass formulations were selected based on glass property model predictions for viscosity, electrical conductivity and leach resistance. Laboratory measurements were conducted to verify the model predictions. Based on the results, the models for electrical conductivity, US DOE 7-day Product Consistency Test (PCT) elemental release, and pH of PCT leachate are accurate for the LILW glass formulations. However, the model for viscosity was able to provide only qualitative results. A leachate conductivity test was conducted on several samples to estimate glass leach resistance. Test results from the leachate conductivity test were useful for comparison before PCT elemental release results were available. A glass formulation K11A meets all the KHNP glass property constraints, and use of this glass formulation on the pilot scale is recommended. Glass formulations K12A, K12B, and K12E meet nearly all of the processing constraints and may be suitable for additional testing. Based on the comparison between the measured and predicted glass properties, existing glass property models may be used to assist with the LILW glass formulation development.
열적 특성은 에너지 물질 분야에서 중요한 특성 중 하나로, 분해열을 방출하기 때문에, 열적 특성 분석에 DSC(Differential Scanning Calorimetry)가 자주 사용된다. 그러나 DSC 측정의 경우, 용융과 같은 열역학적 변화가 kinetics 분석에 방해를 끼친다. 이번 연구에서는 이 문제점을 해결하는 방안으로, 등온 조건으로 한 DSC 기초 데이터와 g 단위로 측정하는 ARC(Accelerating Rate Calorimetry)의 데이터를 이용하여 AKTS(Advanced Kinetics and Technology Solutions) thermokinetic 프로그램을 이용하여 열적 노화 특성을 예측, 비교한다.
폴리스티렌을 저수축제로 사용하고 Zn-stearate를 이형제로 사용하여 함량변화에 따라 벌크 몰드컴파운드의 표면형태 및 기계적 물성에 미치는 영향을 고찰하였다. XPS, 접촉각 측정기 등을 이용하여 표면과 깊이 방향에 대한 원소함량과 접촉각을 측정하였고, 표면형태는 FESEM을 이용하여 관찰하였으며, 표면조도 측정은 AFM을 이용하였다. 저수축제를 첨가하지 않은 경우에 비교하여 저수축제를 9.0 wt% 첨가하였을 경우에는 체적수축률은 0.35%에서 0.05%로 감소하였으며, 표면조도는 $0.27{\mu}m$에서 $0.12{\mu}m$로 감소하였다. 이형제의 함량을 1.8 wt%에서 3.6 wt%로 증가시켰을 경우에는 이형제가 주로 표면에 존재하고 표면조도를 증가시키는 것을 확인하였다. 저수축제의 함량을 5.0 wt%에서 9.0 wt%로 증가시킴에 따라 굴곡탄성율과 충격강도가 약 30% 감소하였다.
We used the photoreactive poly(allylamie) (PPA) as the hydrophilic membrane to control the release of drug from polyurethane(PU). PPA was covalently bonded onto PU surface through the highly reactive nitrene intermediate upon UV light irradiation $(3.3mW/cm^2)$ at 254nm for 5min. Thus the release rate of rifampicin from PU surface was controlled. To know the characteristics of PU surface bonded with PPA, we measured the ATR-FTIR, ESCA, Static Contact Angle and SEM. From these, we suggest that PPA as a hydrophilic membrane is enable to control the release rate of a hydrophobic drug from polymer without the change of bulk property.
When a saturated clay is sampled in an undisturbed manner from a bore hole, the sample extends vertically and shrinks horizontally under undrained conditions due to stress release. The conventional consolidation test specimen is trimmed from the expanded sample so that its diameter is equal to the inner diameter of the consolidation test ring, this test procedure does not reproduce the actual consolidation behavior. The measurement of sample extension was conducted by means of overcoring method found that the extension strains were 1 to 2%. To simulate the in-situ consolidation behavior, the consolidation test method that uses a specimen with a slightly smaller diameter than the inside diameter of consolidometer so that the specimen expands laterally to the inside of the ring.
실온에서 베니어에 ammonium chloride, ammonium sulfate, monoammonium phosphate, 그리고 diammonium phosphate와 같은 암모늄염으로 도포하고, 도포된 베니어의 물리적 성질과 가연성을 조사하였다. 암모늄염로 처리된 베니어의 가연성을 평가하기 위해서, ISO 5660-1 표준에 따른 콘칼로리미터를 이용하여 베니어의 열방출율을 측정하였다. 암모늄염으로 도포된 베니어판은 미처리된 순수 베니어판에 비하여 가연성을 감소시켰다. 도포된 베니어의 flashover 가능성은 R. V. Petrella에 의한 분류 방법에 따라서 착화시간과 최대열방출율을 이용하여 시험하였다. 비중측정 결과 ammonium sulfate로 처리한 베니어의 비중만 미처리 베니어보다 더 높았다. 또한 암모늄염으로 도포된 베니어는 무처리된 순수 베니어보다 낮은 평형함수율을 보였다.
생분해성이 있는 polycaprolactone을 사용하여 용액 상태에서 건조시키는 방법으로 마이크로 캡슐을 제조하였다. 심물질로는 화장품 분야에서 중요한 성분으로 쓰이는 retinol을 선택하였으며 안정제로는 poly(vinyl alcohol)을 사용하였다. 제조 조건에 따른 마이크로캡슐의 형태 변화와 물성 변화를 scanning electron microscope와 differential scanning calorimeter를 이용하여 측정하였으며 심물질의 방출 속도에 미치는 영향들을 UV를 이용하여 측정하였다. 사용한 벽재 물질 용액의 농도, 교반속도, 안정제의 농도 등을 변화 시켜 가면서 마이크로캡슐을 제조하여 보았으며, 최적 조건에서 지름이 5~6 um인 구형 모양의 균일한 크기를 갖는 마이크로캡슐들이 형성되었음을 확인하였다.
폴리우레탄에 인계 화합물을 첨가하여 폴리우레탄폼을 제조하였으며, 인계 화합물이 제조된 폴리우레탄폼의 기계적 물성과 난연성에 미치는 영향에 대하여 고찰하였다. 폴리우레탄과 인계 난연제인 Tri(chloroisopropyl) phosphate(TCPP), Triethyl phosphate(TEP), Trimethyl phosphate(TMP) 각각을 약 $90^{\circ}C$에서 혼합시켜 혼합물로부터 제조된 경질 폴리우레탄폼에 대한 여러 실험을 통하여 기계적 물성뿐만 아니라 난연 효과도 상당히 향상됨을 확인하였다. Cone calorimeter를 이용하여 열방출율(heat release rate, HRR)을 측정하여 난연 첨가제의 함량에 따른 재료별 난연 특성을 평가하였다. 그리고 Scanning Electron Microscope(SEM)을 사용하여 난연제를 첨가하여 만든 폴리우레탄폼의 morphology를 관찰한 결과 순수한 폼과 마찬가지로 매우 균일한 형태의 cell 분포를 가짐을 확인하였다.
기재위에 입혀진 코팅에서 발생하는 크랙킹 현상을 파괴역학을 이용해서 분석하였다. 코팅/기재 구조에서 굽힘모드시 발생하는 코팅크랙킹을 변분법을 이용하여 분석하였으며, 본 연구에서 유도된 변위에너지 방출량을 통해 기재위에 입혀진 코팅층에서 크랙이 확장되는 것을 예측할 수 있다. 본 연구를 통해 얻어진 코팅의 임계 변위에너지 방출량은 재료의 고유성질이며 코팅크랙킹의 보다 근본적인 의미를 제공할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.