• 제목/요약/키워드: relay node

검색결과 307건 처리시간 0.03초

건물 용도별 무선계측 최적 전파강도 산정을 위한 실험적 연구 (An Experimental Study for Optimal RF Output Power Estimation of Wireless Sensor Network)

  • 이정재;최석용;조수
    • 설비공학논문집
    • /
    • 제21권8호
    • /
    • pp.462-467
    • /
    • 2009
  • Researches and developments on BEMS are performed world-widely through sustainable management in various conditions. However, there are many obstacles to adapt the system in existing buildings because it needs highly expensive equipments, which are designed for newly built buildings, to install. Therefore, there are numerous limits exist when applying the BEMS in established buildings. The purpose of this study estimates the optimization of RF output power in WSN(Wireless Sensor Networks), which is the essential technology to develop PEMS. The results of this study is as follows ; 1) Applying WSN technique in buildings was possible. 2) As RF output power increases, the number of relay node reduced, therefore, the WSN showed more stability. 3) When estimating optimal RF output power in school, it should be considered between the number of relay node and RF output power. 4) Considering battery consumption and possibility of reception, the best suited RF output power is -20dbm in apartment house.

Fast Recovery Routing Algorithm for Software Defined Network based Operationally Responsive Space Satellite Networks

  • Jiang, Lei;Feng, Jing;Shen, Ye;Xiong, Xinli
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권7호
    • /
    • pp.2936-2951
    • /
    • 2016
  • An emerging satellite technology, Operationally Responsive Space (ORS) is expected to provide a fast and flexible solution for emergency response, such as target tracking, dense earth observation, communicate relaying and so on. To realize large distance transmission, we propose the use of available relay satellites as relay nodes. Accordingly, we apply software defined network (SDN) technology to ORS networks. We additionally propose a satellite network architecture refered to as the SDN-based ORS-Satellite (Sat) networking scheme (SDOS). To overcome the issures of node failures and dynamic topology changes of satellite networks, we combine centralized and distributed routing mechanisms and propose a fast recovery routing algorithm (FRA) for SDOS. In this routing method, we use centralized routing as the base mode.The distributed opportunistic routing starts when node failures or congestion occur. The performance of the proposed routing method was validated through extensive computer simulations.The results demonstrate that the method is effective in terms of resoving low end-to-end delay, jitter and packet drops.

Energy Efficient and Secure Multipoint Relay Selection in Mobile Ad hoc Networks

  • Anand, Anjali;Rani, Rinkle;Aggarwal, Himanshu
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권4호
    • /
    • pp.1571-1589
    • /
    • 2016
  • Nodes in MANETs are battery powered which makes energy an invaluable resource. In OLSR, MPRs are special nodes that are selected by other nodes to relay their data/control traffic which may lead to high energy consumption of MPR nodes. Therefore, employing energy efficient MPR selection mechanism is imperative to ensure prolonged network lifetime. However, misbehaving MPR nodes tend to preserve their energy by dropping packets of other nodes instead of forwarding them. This leads to huge energy loss and performance degradation of existing energy efficient MPR selection schemes. This paper proposes an energy efficient secure MPR selection (ES-MPR) technique that takes into account both energy and security metrics for MPR selection. It introduces the concept of 'Composite Eligibility Index' (CEI) to examine the eligibility of a node for being selected as an MPR. CEI is used in conjunction with willingness to provide distinct selection parameters for Flooding and Routing MPRs. Simulation studies reveal the efficiency of ES-MPR in selection of energy efficient secure and stable MPRs, in turn, prolonging the network operational lifetime.

DTN에서 메시지 분포에 따른 중계 노드 선택 기법 (Relay node selection scheme based on message distribution for DTN)

  • 도윤형;이강환
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 춘계학술대회
    • /
    • pp.431-433
    • /
    • 2016
  • 본 논문에서는 Delay Tolerant Network(DTN) 환경에서 메시지 분포를 사용하여 효율적인 중계노드를 선택하는 기법을 제안한다. DTN은 종단 간 연결이 불확실한 네트워크에서의 통신을 Store-Carry-Forward 방식을 사용하여 메시지를 목적 노드에 전달한다. 또한 종단 간 연결이 불확실한 상황에서도 중계 노드를 통해 메시지를 목적 노드에 전달하여 높은 전송률을 보장한다. 하지만 에피데믹(Epidemic) 라우팅이나 Spray and Wait 라우팅과 같은 기존 다중 복사 라우팅 알고리즘은 접촉한 모든 노드에게 메시지를 복사하여 메시지 복사로 인한 오버헤드가 높아진다. 반면에 PRoPHET 라우팅과 같은 단일 복사 알고리즘은 적은 오버헤드를 발생시키지만 중계 노드 수 감소로 인한 메시지 전송률 감소 현상이 나타난다. 본 논문에서 제안하는 알고리즘은 기존 DTN 라우팅의 문제점을 보완하기 위해 네트워크의 메시지 분포를 분석하여 효율적인 중계 노드를 선택할 수 있는 확률을 결정한다. 본 논문에서는 모의실험을 통해 제안하는 알고리즘이 기존 DTN 라우팅 알고리즘과 비교하여 더 효율적임을 증명한다.

  • PDF

IEEE 802.16 시스템에서 양방향 트래픽을 위한 네트워크 코딩 기법 (Network Coding for Bidirectional Traffic in IEEE 802.16 Systems)

  • 박정민;황준;고승우;황영주;김성륜
    • 한국통신학회논문지
    • /
    • 제36권12A호
    • /
    • pp.975-983
    • /
    • 2011
  • 본 논문에서는 네트워크 코딩 기법이 IEEE 802.16 계열의 무선 통신 시스템에 어떻게 적용되는지에 대해 다룬다. 또한, 본 논문에서는 네트워크 코딩의 overhearing 문제를 피하기 위해, 통신하고자 하는 양단의 단말들이 중계기를 통해 정보를 서로 교환하는 양방향 트래픽에 주안점을 두고 있다. 이러한 양방향 트래픽은 TCP 프로토콜이 혼잡 제어와 ACK을 기반으로 하는 에러 복구를 수행하는 인터넷 환경에서 주로 관찰된다. 그러므로 네트워크 코딩 기법의 적용을 통해 무선 인터넷의 스펙트럼 효율을 향상시킬 수 있을 것이라 예상되는 바이다. 본 논문에서의 모의실험 결과는 네트워크 코딩 기법을 적용하였을 때, 기존의 무선 중계 시스템과 비교하여 평균적으로 36 퍼센트의 수율 향상을 가져올 수 있음을 보여준다.

연결도와 에너지 가중치 기반의 라우팅 프로토콜 (Routing Protocol based on Connectivity Degree and Energy Weight)

  • 정윤수
    • 중소기업융합학회논문지
    • /
    • 제4권1호
    • /
    • pp.7-15
    • /
    • 2014
  • 이 논문에서는 노드 당 소비 전력의 균형을 달성하기 위해 네트워크 수명의 최적 경로 탐색 과정을 달성하기 위한 효율적인 라우팅 프로토콜을 제안한다. 제안 프로토콜은 각 중간 노드가 전력 레벨 및 자식 노드의 분기 수를 유지하고 노드에 가장 가까운 이웃 노드로 데이터를 전송한다. 제안 프로토콜은 클러스터내에 존재하는 싱크의 수명을 연장시키기 위해서 각 노드의 에너지 소비를 최소화 한다. 또한, 제안 프로토콜은 노드의 잔류 에너지와 기지국과의 거리를 기준으로 인접한 중계 노드를 선택한다. 실험 결과, 제안 프로토콜은 기존 프로토콜에 비해 네트워크 내 잔존하는 노드들의 수명을 7.5 % 의 높였다.

  • PDF

Adaptive Data Aggregation and Compression Scheme for Wireless Sensor Networks with Energy-Harvesting Nodes

  • Jeong, Semi;Kim, Hyeok;Noh, Dong Kun;Yoon, Ikjune
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권3호
    • /
    • pp.115-122
    • /
    • 2017
  • In this paper, we propose an adaptive data aggregation and compression scheme for wireless sensor networks with energy-harvesting nodes, which increases the amount of data arrived at the sink node by efficient use of the harvested energy. In energy-harvesting wireless sensor networks, sensor nodes can have more than necessary energy because they harvest energy from environments continuously. In the proposed scheme, when a node judges that there is surplus energy by estimating its residual energy, the node compresses and transmits the aggregated data so far. Conversely, if the residual energy is estimated to be depleted, the node turns off its transceiver and collects only its own sensory data to reduce its energy consumption. As a result, this scheme increases the amount of data collected at the sink node by preventing the blackout of relay nodes and facilitating data transmission. Through simulation, we show that the proposed scheme suppresses the occurrence of blackout nodes and collect the largest amount of data at the sink node compared to previous schemes.

Load-Balanced One-hop Overlay Multipath Routing with Path Diversity

  • Liao, Jianxin;Tian, Shengwen;Wang, Jingyu;Li, Tonghong;Qi, Qi
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권2호
    • /
    • pp.443-461
    • /
    • 2014
  • Overlay routing has emerged as a promising approach to improve reliability and efficiency of the Internet. For one-hop overlay source routing, when a given primary path suffers from the link failure or performance degradation, the source can reroute the traffic to the destination via a strategically placed relay node. However, the over-heavy traffic passing through the same relay node may cause frequent package loss and delay jitter, which can degrade the throughput and utilization of the network. To overcome this problem, we propose a Load-Balanced One-hop Overlay Multipath Routing algorithm (LB-OOMR), in which the traffic is first split at the source edge nodes and then transmitted along multiple one-hop overlay paths. In order to determine an optimal split ratio for the traffic, we formulate the problem as a linear programming (LP) formulation, whose goal is to minimize the worse-case network congestion ratio. Since it is difficult to solve this LP problem in practical time, a heuristic algorithm is introduced to select the relay nodes for constructing the disjoint one-hop overlay paths, which greatly reduces the computational complexity of the LP algorithm. Simulations based on a real ISP network and a synthetic Internet topology show that our proposed algorithm can reduce the network congestion ratio dramatically, and achieve high-quality overlay routing service.

무선 다중 홉 환경을 위한 기여도 기반의 기회적 플러딩 기법 (Contribution-Level-Based Opportunistic Flooding for Wireless Multihop Networks)

  • 변승규;서형윤;김종덕
    • 정보과학회 논문지
    • /
    • 제42권6호
    • /
    • pp.791-800
    • /
    • 2015
  • 본 논문은 다중 홉 무선 네트워크 환경에서 브로드캐스트 전송 효율성 뿐 아니라 신뢰도도 우수한 기여도 기반 기회적 플러딩 기법을 제안한다. 브로드캐스트 트리를 전송 결과와 관련 없이 미리 결정하면, 무선 네트워크의 내재적 불안정성으로 지정된 릴레이 노드가 패킷을 수신하지 못할 수 있다. 본 논문에서 제안하는 기여도 기반 기회적 플러딩 기법은 릴레이 노드를 전송 결과를 기반으로 선택하는 기회적 전송의 개념을 사용하여 신뢰도를 제고하였다. 또한 전체 네트워크에 대한 단말 기여도에 따라 릴레이 우선 순위를 조정하여 불필요한 릴레이를 제거하고 전송 효율을 높였다. NS-3 시뮬레이터를 활용하여 제안 기법을 블라인드 플러딩, 그리고 도미넌트 프루닝과 비교하였다. 성능 분석 결과 제안 프로토콜은 블라인드 플러딩에 비해 릴레이 횟수에 기초한 효율 관점에서 35%, 도미넌트 프루닝에 비해 수신 노드 수에 기초한 신뢰도 관점에서 20~70% 수준의 성능 향상을 얻었다.

웨이블릿 변환을 이용한 고장과 Variation의 유형 구분 알고리즘 개발 (Development of the Algorithm for Discriminating Faults from Variation using Wavelet Transform)

  • 서훈철;이순정;김철환
    • 전기학회논문지
    • /
    • 제60권8호
    • /
    • pp.1460-1466
    • /
    • 2011
  • This paper proposes the algorithm for discriminating faults from the variation due to the operation of non-linear components to prevent the mal-operation of protection relay in the distribution system. An IEEE 13 node test feeder is modeled to analyze the characteristics of the fault and each variation using EMTP-RV. Simulations with various operating conditions of transformers, non-linear loads, and unbalanced loads are performed using the test feeder model. Based on simulation results, the wavelet transform is adopted to analyze the current waveforms from the faults and variations to find out the differences between them and the algorithm for discriminating faults from the variation is proposed. The proposed algorithm is verified by using the current waveforms simulated in the KEPCO's distiribution system and IEEE 13 node test feeder.