• 제목/요약/키워드: relay control

검색결과 480건 처리시간 0.027초

Approximated Outage Probability for ADF Relay Systems with Burst MPSK and MQAM Symbol Transmission

  • Ko, Kyunbyoung;Lim, Sungmook
    • International Journal of Contents
    • /
    • 제11권1호
    • /
    • pp.7-14
    • /
    • 2015
  • In this paper, we derive the outage probability for M-ary phase shifting keying (MPSK) and M-ary quadrature amplitude modulation (MQAM) burst transmission (BT) of adaptive decode-and-forward (ADF) cooperative relay systems over quasi-static Rayleigh fading channels. Within a burst, there are pilot symbols and data symbols. Pilot symbols are used for channel estimation schemes and each relay node's transmission mode selection schemes. At first, we focus on ADF relay systems in which the probability density function (PDF) is derived on the basis of error events at relay nodes corresponding to channel estimation errors. Next, the average outage probability is derived as an approximate expression for an arbitrary link signal-to-noise ratio (SNR) for different modulation orders. Its accuracy is demonstrated by comparison with simulation results. Further, it is confirmed that BT-ADF relay systems with pilot symbol based channel estimation schemes enables to select correctly decoded relay nodes without additional signaling between relay nodes and the destination node, and it is verified that the ideal performance is achieved with small SNR loss.

전기자동차의 전력공급을 위한 PRA 설계 및 구현 (Design and Implementation of PRA for a Power Supply of Electrical Vehicle)

  • 채용웅
    • 한국전자통신학회논문지
    • /
    • 제11권7호
    • /
    • pp.653-658
    • /
    • 2016
  • 본 논문은 릴레이 장치 및 구동 제어 방법에 관한 것으로서, DC 고전압 배터리의 전력을 전기자동차의 인버터를 구동하기 위해 전력을 접속하거나 차단하는 릴레이에 관한 것이다. 본 논문을 통해 DC 고전압 배터리에서 릴레이가 접속되는 순간 릴레이의 접점에서 강한 스파크가 발생하는 것을 방지하고 접점의 열화 및 노후로 인해 증가하는 릴레이 내부 저항값을 보상하기 위한 서브릴레이가 제안되었다. 제작된 릴레이의 정격 전력은 10KW 정도이며 전기적 순단시험 등을 통해 릴레이의 전기적 특성을 검증하였다.

MC-CDMA 시스템에 대한 주파수 효율적인 CDD-DF-Relay 기법에 관한 연구 (Frequency Efficient CDD-DF-Relay schemes for MC-CDMA Systems)

  • 고균병;우중재
    • 대한전자공학회논문지TC
    • /
    • 제48권5호
    • /
    • pp.1-7
    • /
    • 2011
  • 본 논문에서는 CDD-DF-Relay 기법을 MC-CDMA 시스템에 대해 제안하고 제안된 기법의 성능을 다중경로 레일리 페이딩 채널에서 검증한다. 일반적인 DF-Relay 기법에서는 모든 Relay들이 직교 채널들로 신호를 전송하여야 하기 때문에 그 장점 즉, 다이버시티 이득은 주파수 효율의 저하로부터 얻어진다고 할 수 있다. 따라서 이러한 주파수 효율 저하의 문제점을 해결하기 위하여 본 논문에서는 CDD 기법을 각 Relay 노드에 적용하여 모든 Relay가 하나의 채널만을 사용하도록 한다. 이는 Destination에서 바라본 하나의 R-D 링크 채널의 Delay Spread가 길어지는 효과를 갖는다. 즉 Relay 개수의 증가에 따라 다중 경로수가 증가됨을 의미하고, 이는 MC-CDMA 시스템에서 주파수 다이버시티 이득으로 해설될 수 있다. 모의실험에서는 일반적인 DF-Relay 기법과 제안된 CDD-DF-Relay 기법의 성능을 비교 분석한다. 이를 통해 제안된 기법이 주파수 효율의 저하없이 협력 다이버시디 이득을 획득할 수 있음을 확인하였다.

전달 시간 제한이 있는 브로드캐스트 아웃티지 확률을 감소시키는 분산적인 다중 홉 중계 기법 (Distributed Multi-Hop Relay Scheme to Reduce Delay-Constrained Broadcast Outage Probability)

  • 고병훈;변일무;이두호;전기준;김범무;이성로;김광순
    • 한국통신학회논문지
    • /
    • 제38C권2호
    • /
    • pp.219-226
    • /
    • 2013
  • 본 논문에서는 수신 노드의 수가 증가하고 전달 제한 시간이 있는 브로드캐스트 센서 네트워크에서 아웃티지 확률을 감소시킬 수 있는 다중 홉 중계 방식을 제안한다. 패킷을 수신한 여러 개의 노드들이 분산 빔 형성 기법과 같이 동시에 패킷을 전송하는 다중 홉 중계 방식을 고려한다. 그리고 제한된 전달시간 내에서 패킷을 전송하는 데에 소모되는 평균 에너지 제한 조건을 만족 시키면서 패킷 수신에 성공한 모든 노드가 중계 노드로 동작하기 위한 채널 접속제어 기법과 송신 전력 제어 방식을 제안한다. 그리고 센서 네트워크 구축에 사용되는 지그비 기술의 다중 홉 브로드캐스트 중계 방식인 플러딩 기법과 비교하여 제안하는 방식의 아웃티지 확률이 더 낮아지고 평균 총 수신 전송률은 증가하게 되는 것을 실험을 통해서 보인다.

유리 성형기의 무접점릴레이(SSR) 수명 예측장치 개발 (Development of Solid State Relay(SSR) Life Prediction Device for Glass Forming Machine)

  • 양성규;김갑순
    • 한국기계가공학회지
    • /
    • 제21권2호
    • /
    • pp.46-53
    • /
    • 2022
  • This paper presents the design and manufacture of a Solid State Relay (SSR) life prediction device that can predict the lifetime of an SSR, which is a key component of a glass forming machine. The lifetime of an SSR is over when the current supplied to the relay is overcurrent (20 A or higher), and the operating time is 100,000 h or longer. Therefore, the life prediction device for the SSR was designed using DSP to accurately read the current and temperature values from the current and temperature sensors, respectively. The characteristic test of the manufactured non-contact relay life prediction device confirmed that the current and temperature were safely measured. Thus, the SSR lifetime prediction device developed in this study can be used to predict the lifetime of an SSR attached to a glass forming machine.

중용량 전동기보호를 위한 전류형 디지털 보호계전기 개발 (Development of Current-based Compact Digital Protective Relay for Induction Motor Protection)

  • 정종진;김중표;신종한;박장수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
    • /
    • pp.140-142
    • /
    • 2005
  • This paper describes the current- based compact digital motor protective relay for low and high voltage induction motors, which are widely used in industrial and commercial power systems. The existing protective relays for motor protection had only overload, short circuit, reverse phase, open circuit and grounding protective elements, and measurement, start/stop control function. But in present day, for automation system, various functions are required, especially motor management and sequence control function and more. To meet these requirements, we developed an economic current-based compact digital motor protective relay which had various function to control, manage and monitor the induction motor.

  • PDF

Relay Feedback을 이용한 시간지연 시스템에 대한 제어기 설계 (Control1er Design for Time-Delay System Using Relay Feedback)

  • 이규용;이석원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 D
    • /
    • pp.2636-2638
    • /
    • 2000
  • In this paper, we show the simple methods of designing the Smith predictor for the long dead time processes. We are using the relay feedback to model the processes in the second-order plus dead time structure. The model is able to represent a various class of processes dynamics including low- or high-order, and monotonic or oscillatory process. A PID type controller is proposed for the main controller in the Smith controller, which insure the stability of overall system. Simulation Examples are also provided to illustrate the effectiveness and applicability of the proposed controller.

  • PDF

IEEE802.16j 기반의 2-홉 셀룰러 중계시스템에서 하향링크 접근영역과 중계영역에 대한 최적 무선자원 할당방법 연구 (A Study on the Optimal Wireless Resource Allocation for the Access and Relay Zones of Downlink in a 2-hop Cellular Relay System based on IEEE802.16j)

  • 이인환;김세진;조성호
    • 인터넷정보학회논문지
    • /
    • 제11권3호
    • /
    • pp.43-51
    • /
    • 2010
  • 본 논문에서는OFDMA-TDD 구조를 갖는 IEEE802.16j 기반의 2-홉 셀룰러 중계시스템에서 non-transparent 방식의 무선 중계기를 이용하여 서비스 영역을 확장할 때, 시스템 전송률 및 하향링크 접근영역(Access zone)과 중계영역(Relay zone)에 대한 최적 무선자원 할당방법을 연구한다. 분석을 위해 먼저 non-transparent 방식의 MAC (Media Access Control) 프레임 구조를 알아보고, 접근영역과 중계영역에서 단말과 중계기 등의 네트워크 구성요소들에 대한 간섭요소들을 조사한다. 모의실험을 통하여 기지국과 중계기의 거리에 따라 확장되는 2-홉 셀 커버리지 크기와 전송률을 분석하고, 분석된 결과를 이용하여 하향링크 접근영역과 중계영역에 대한 최적 무선자원 할당량을 제시한다.

Relay Station 기반 최적 핸드오프 우선화 제어 알고리즘 (Relay Station based Optimal Handoff Prioritization Control Algorithm)

  • 유혜인;강해린;김낙명
    • 대한전자공학회논문지TC
    • /
    • 제46권7호
    • /
    • pp.24-31
    • /
    • 2009
  • 차세대 멀티미디어 이동통신 시스템에서 자원 예약 기법은 핸드오프 call의 Qos를 보장하기 위한 효과적인 방법이다. 그러나 핸드오프를 위한 자원 예약은 new call의 blocking 확률에는 부정적인 영향을 미친다. 본 논문에서는 핸드오프 dropping 확률과 new call의 blocking확률 사이의 tradeoff관계를 최적화하기 위하여 relay station을 기반으로 한 새로운 핸드오프 우선화 제어 알고리즘을 제안한다. 제안된 알고리즘에서는, relay가 핸드오프 과정에 개입하여 핸드오프 직후의 단말에게 고효율의 데이터 전달 전송을 가능하게 함으로써 신속한 서비스를 제공해줄 수 있다. 본 논문에서는, 제안된 알고리즘을 Markov chain을 통해 모델링 하고, 핸드오프 패킷의 dropping 확률과 new 패킷의 blocking 확률의 성능을 도출한다. 수치 해석 결과를 통해, 제안된 핸드오프 알고리즘이 기존의 핸드오프 우선화 기법들에 비해 핸드오프 패킷의 dropping 확률과 신규 패킷의 blocking 확률 측면에서 우수한 성능을 가짐을 보였다.