• 대한전기학회논문지:전력기술부문A
• /
• 제51권9호
• /
• pp.451-459
• /
• 2002

This paper presents a method for modelling of the impedance locus in order to test the protective relay with dynamic. This paper has the two parts, the first part is the configuration of impedance locus with voltage magnitude, total impedance magnitude and angle. And the second part is the control of the locus speed with deviation of two frequencies. The proposed method is applied to two machine equivalent system with PSCAD/EMTDC to show its effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.196-198
• /
• 2002

This paper represents a new approach for the protective relay of power transmission lines using a Artificial Neural Network(ANN). A different fault on transmission lines need to be detected, classified and located accurately and cleared as fast as possible. However, The protection range of the distance relay is always designed on the basis of fixed settings, and unfortunately these approach do not have the ability to adapt dynamically to the system operating condition. ANN is suitable for the adaptive relaying and the detection of complex faults. The backpropagation algorithm based multi-layer perceptron is utilized for the learning process. It allows to make control to various protection functions. As expected, the simulation result demonstrate that this approach is useful and satisfactory.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.124.3-124
• /
• 2001

The nonlinearity of several chemical processes is usually approximated by a series of the nonlinear static element and the linear subsystem. In the case of the model that the nonlinear static element precedes the linear subsystem, it is called a Hammerstein model. It is a Wiener model when the order is reserved. Here we investigate a relay feedback identification method for Hammerstein type nonlinear processes. The proposed method separates the identification of the nonlinear static function from that of the linear subsystem by using a relay feedback method. From two times activation of nonlinear processes, we identify he whole range of the nonlinear static function as well as the ultimate information of the linear subsystem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.606-610
• /
• 1991

A relay is the one of small electrical components for automobiles and used for industry widely. We have developed the automation system for relay assembly and test to make it improve the productivity and decrease the man power. In order to determine the objective process of automation, we investigated 6 small and medium sized-enterprises and 1 greate sized-enterprise producing relays. And, we selected 2 model enterprises of them. One of the two is the system to develop. The scope of our study is the analyse of the conventional workcell, the determination of the system specification, the design of the system layout, the determination of the system cycle time, the design of the system mechanism, and the development of the controller for the system. We think that the developed system may be solve the technical and the economical problems interrupted efficiential automation of domastic small and medium sized-enterprises, and improve the international competitive power.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.925-928
• /
• 2013

본 논문에서는 기존 유선 전력 전송 기반 에너지 하베스팅 시스템에서 발생되는 문제점을 해결하기 위해 릴레이 기반의 무선 전력 전송 방식을 제안한다. 본 논문에서 제안하는 방식은 에너지 블록 내에 4방향코일을 배치하여 전자기 유도 기반의 무선 전력 전송을 수행할 수 있으며, 전송 신뢰성을 확보하기 위한 릴레이 제어 알고리즘을 통해 송 수신 경로를 확장할 수 있다.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.43-47
• /
• 1980

The author designed and tested the high sensitive three-phase power factor meter and relay circuit, and dealt with the circuit to detect the phase of the current and the voltage. An operational amplifier comparator circuit and two single-phase transformers are used to control and detect the phase angle between the current and the voltage. The results obtained are as follows: 1. Converting the sine wave input current into the constant amplitude rectangular wave form by using a transistor chopper circuit, the power factor can be measured precisely over the load current of 0.08 A. 2. Using the moving coil type current meter, the power factor meter can be read in uniform . scale all over the range. 3. Using the three-phase power factor meter, the power factor relay which works at any power factor can be made.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권11호
• /
• pp.647-654
• /
• 2003

As electrical power system has become complicated and enlarged to cope with the increasing electric demand, it has to be expected that higher speed, higher reliability, higher function and higher arithmetic ability in protective relay should be realized. Therefore, in this papers, by hardware design and implementation used DMA controller that transfer blocks of data to any location in the memory map without interfering with CPU operation, CPU utilization is increased effectively, as a result it made possible to implement multi-function digital protective relay which has high trust and high function of protection as well as control and metering for power transformers using single processor(DSP).

• 한국멀티미디어학회논문지
• /
• 제15권12호
• /
• pp.1464-1474
• /
• 2012

In this paper, we propose a QoS (Quality of Service)-aware and cooperative resource reservation scheme using cross-layer link adaptation for wireless high definition video transmission through UWB (Ultra Wide Band) network with D-MAC (Distributed Medium Access Control). A wireless high definition video transmission system usually requires stable high throughput even without line-of-sight, e.g., a destination device in another room separated by a wall. Since the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme causes lots of DRP resource reservation conflicts due to failure of beacon detection in wireless channel environment, overall performances of the WiMedia D-MAC can be deteriorated. And the current WiMedia MAC standard has not considered QoS provisioning even though QoS parameters such as a range of service rates are provided to each traffic stream. Therefore, we propose Relay DRP protocol with QoS-based relay node selection criterion, which makes a relay path to avoid DRP resource reservation conflicts and guarantee QoS more stably through cross-layer link adaptation of cooperative relay transmission scheme and is compliant with the current WiMedia D-MAC protocol. Simulation results demonstrate performance improvements of the proposed method for throughput and QoS provisioning.

• 한국컴퓨터정보학회지
• /
• 제14권2호
• /
• pp.129-134
• /
• 2006

이 논문에서는 터미널 부분의 중요 신호를 유무선방식을 통하여 통합적으로 감시, 관리하기 위한 DCS 터미널 원격 감시 미들웨어를 설계 및 구현하고 미들웨어의 성능 및 기능을 평가하기 위해 터미널 부분의 릴레이들의 동작 상태 및 퓨즈의 이상 유무를 실시간으로 감시하기 위한 보드를 설계 제작한다. 제안된 DCS 터미널 원격감시 미들웨어는 각 릴레이들의 동작 상태를 실시간으로 확인이 가능하며 에러 발생 시 에러 유형을 즉시 제공하며 또한 릴레이의 규격 및 사용기간을 고려하여 교체시기를 알려주어 릴레이의 고장을 사전에 예방함으로써 산업분야의 경제적인 효과가 기대된다.

• 한국통신학회논문지
• /
• 제42권2호
• /
• pp.338-344
• /
• 2017

본 논문에서는 송신단, 수신단, 중계 전송단에서 모두 다중 안테나를 가지고 양방향 중계 증폭 전송 방식으로 동작하는 통신 환경을 고려한다. 양방향 중계 전송에서 발생하는 자기 간섭을 한 쪽의 수신단에서는 제거할 수 있고, 다른 한 수신단에서는 제거할 수 없는 상황에서 최대 전송률을 보내기 위해 릴레이 구조를 최적화하는 것을 목표로 한다. 먼저 최대 전송률을 구하기 위하여 GD(gradient descent) 기반의 지역 최적화 알고리즘을 개발하고, 보다 간단한 구조를 가지는 특이값 분해(SVD: singular value decomposition) 기반의 블록 삼각화 방법을 제안한다. 시뮬레이션 결과는 제안하는 양방향 기법들이 기존의 양방향 방법에 비해 자기간섭 제거 기능이 없는 기기가 상용될 때 향상된 성능을 얻는다는 것을 보여준다.