• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.165-170
• /
• 2002

For the inaccessible area where the field verification is unable, it is difficult to obtain the ground control points (GCPs) or the acquired GCPs may be inaccurate. In general systematic geometric correction is achieved by utilizing orbit ephemeris and three axis attitude data of the satellite. however, this method results to poor accuracy of the imagery's absolute coordinates. To improve the absolute accuracy as well as the relative accuracy, we added the accessible region into the inaccessible area. We obtained GCPs in the accessible region by the fast static GPS survey and made geometric corrections with these biased GCPs. Because the biased GCPs show a pattern of coordinate errors, we analyzed this tendency to track the estimated errors in the inaccessible area.

• Korean Journal of Community Nutrition
• /
• v.5 no.4
• /
• pp.608-614
• /
• 2000

The purpose of this study was to evaluate the relative importance among various biological and environmental factors on refractive errors. Various factors such as diseases, health related behavior such as drinking, smoking and exercise, as well as dietary factors were considered as a possible determinant. Surveys of 492 residents over 20 years of age in Kuri city were conducted during 1998. The survey included a refractive error test adopting a autokerato-refractometer, dietary survey using a 24 hour recall method, disease survey including blood and other diagnosis tests, and a health behavior survey using questionnaires with variables of smoking, drinking, and exercise. A stepwise logistic regression analysis was adopted to analyse the relative importance among independent variables of health behaviors, disease, and dietary factors on ametropias. As a result, in the case of myopia, liver dysfunction appeared to be the most important factors followed by the health related behavior of smoking and exercise as the second most important factors. Nutrient factors such as carotene and protein appeared to be the third most important factors. Similar results had been shown in the case of the hyperopia. In summary, liver dysfunction and the health related behaviors of drinking and smoking appeared to be more influential factors on abnormal eye sight of myopia and hyperopia than dietary factors.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.1
• /
• pp.3-13
• /
• 2004

For optimal irrigation reservoir operation during flood and normal period, a general and systematic policy is suggested to make balance of the conflicting purposes between water conservation and flood control. We developed Open Water Management Program (OWMP) with an open architecture to deal with newly arising upgrade problems for optimal management of irrigation reservoir. And we evaluated the applicability of OWMP to estimate daily runoff from an agricultural watershed including irrigation reservoirs, and analyzed behaviour of irrigation reservoirs as irrigation water requirements considering frequency analysis of reservoir storage and frequency analysis water requirements for effective management of reservoir. When we executed OWMP with data produced from an experimental field, IHP basins, the mean relative errors of application of daily runoff and irrigation water requirement were less than 5％. We also applied OWMP to a Seongju irrigation reservoir to simulate daily runoff, storage and water requirement from 1998 to 2002, and the mean model efficiency between measured and simulated value was 0.76. Our results based on the magnitude of relative errors and model efficiency of the model simulation indicate that the OWMP can be a tool nicely adapted to the effective water management of irrigation reservoir for beneficial water use and flood disaster management.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3888-3896
• /
• 2022

Nuclear data is the basis of reactor physics analysis. This paper aim at studying the influence of major evaluated nuclear data libraries, CENDL-3.2, ENDF/B-VIII.0, JEFF-3.3, and JENDL-4.0u, on the neutronics modelling of CEFR start-up tests. Results show these four libraries have a good performance and consistency in the modelling CEFR start-up tests. The JEFF-3.3 results exhibit only an 8 pcm k_eff difference with the measurement. The difference in criticality is decomposed by nuclide, which shows the large overestimation of CENDL-3.2 is mainly from the cross-section of ⁵²Cr. Except for few cases, the calculation results are within 1σ of measurement uncertainty in control rod worth, sodium void reactivity, temperature reactivity, and subassembly swap reactivity. In the evaluation of axial and radial reaction distribution, there are about 65% of relative errors that are less than 5% and 82% of relative errors that are less than 10%.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.13 no.2
• /
• pp.10-15
• /
• 1984

The aims of this study are to obtain a suitable method and a proper mesh for investigation of the temperature distribution and heat transfer. The relative errors of temperature distribution and heat transfer for each mesh are acquired in accordance with linear finite element (FEM 3), square finite element (FEM 6), cubic finite element (FEM 10), and finite difference method (FDM). It has been found that FEM 10 is the most accurate measure to obtain the temperature distribution and heat transfer. However, no significant results have been obtained successfully, because when higher order finite element methods are used the more computational efforts are necessary due to the distribution of elements. The results of this study are as follows ; 1 . In case of a=b=L, meshes for less than $1\%$ relative errors (temperature distribution) acquired in various methods to exact solution are $2\times2,\;4\times4,\;8\times8\;and\;8\tiems8$ for each FEM 10, FEM 6, FEM 3 and FDM and a=L, b=1/2L are $10\times5$ for each FEM 3 and FDM. And the tendency of results acquired of heat transfer is similar to those above. 2 . In computational efforts (a=b=L), FEM 6 has taken 21 times. and FEM 10 154times FEM 3 and FDM and FEM 3 is the sane as FDM.

• Communications for Statistical Applications and Methods
• /
• v.15 no.2
• /
• pp.255-264
• /
• 2008

It is common in practice to use mean squared error(MSE) for prediction. Recently, Park and Shin (2005) and Jones et al. (2007) studied prediction based on mean squared relative error(MSRE). We proposed a new nonparametric way of prediction based on MSRE substituting Jones et al. (2007) and provided a small simulation study which highly supports the proposed method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.1
• /
• pp.59-65
• /
• 1987

This paper presented the procedures for detecting gross errors, and described the influence of the number and distribution of points on the internal reliability in photogrammetric adjustment, such as relative orientation and independent model method. The use of the standard six points for relative orientation and the regular four points for independent model method result in low internal reliability. With such a distribution, gross erors in measured points might not be detected But using cluster of double or triple points instead of individual point, internal reliability improves remarkably.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.147-152
• /
• 1992

This paper describes a new approach that can extract the relative shift vectors between two aerial image sequences for implementing the visual navigation system. This method minimizes the noise included in the aircraft attitude information that represents the changes of the aircraft attitude using the statistical method and Kalman Filtering method. This result can be used to find the relative shift vectors which are independent of the attitude changes indicating the true trajectories of aircraft. We applied this method to the image about which we had already known the information of aircraft attitude, and that result showed that the errors were minimized successfully.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2003

In this paper, an observer-based adaptive controller is proposed to control the longitudinal motion of vehicles. The standard gradient method is used to estimate the vehicle parameters, mass, time constant, etc. The inter-vehicle spacing and its derivatives are estimated by using the sliding mode cascade observer introduced in this paper. It is shown that the proposed adaptive controller is uniformly ultimately bounded. It is also shown that the errors of the relative distance, the relative velocity and the relative acceleration asymptotically converge to zero. The simulation results are presented to investigate the effectiveness of the proposed method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.9-15
• /
• 2011

Any relative deformation between the cutting tool and the workpiece at machining point results directly in geometric and dimensional errors. The sources of relative deformations between the cutting tool and the workpiece at the contact point may be due to vibration, thermal deformation and cutting forces. In this paper, geometric error prediction of workpiece in turning has been investigated. To reach this goal, turning experiments are carried out according to selected cutting conditions. The variable cutting conditions are cutting speed, depth of cut and feed rate. The results will be useful as a guidance to select cutting conditions to improve the geometrical accuracy.