• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.197-208
• /
• 2019

Biological damages of wooden cultural properties are closely related to the preservation of the environment; these damages can be accelerated because of rapid climate change. Therefore, to preserve cultural properties, it is important to understand environmental characteristics. This study aims to investigate the status of termite damage and the characteristics of major environmental factors such as micro-meteorology, meso-meteorology, and local-meteorology of the Josadang shrine in the Seonamsa temple at Suncheon. Damage was confirmed by visual observation and the response of the termite detection dog at the north-west corner. Also another damage was observed by the termite detection dog at the north-east corner. These pillars had lower surface temperature and higher moisture content compared with the pillars in the front. The mean temperature of the entire time was similar for the meteorologies; however, the relative humidity differed. High relative humidity, greater than 70%, was observed frequently. In particular, it was determined that the termite activity days were the most inside the Josadang shrine. The statistical analysis confirmed that there was a difference between the meteorology events through the F ratio. In addition, the difference of environmental factors with relative humidity and temperature was identified more great difference in relative humidity through the t-statistics of temperature and relative humidity. And then relative humidity was confirmed most great in the difference of meso-meteorology and local-meteorology.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.189-200
• /
• 2023

As urbanization and industrialization increase development in downtown areas, damage due to ground settlement continues to occur. Building collapse in urban has a high risk of leading to large-scale damage to life and property. However, there has rarely been studied on measurement data analysis methods when uneven loads are applied to the excavated ground and no prior knowledge of the ground. Accordingly, it was attempted to analyze the relative settlement behavior and correlation by processing the time-series surface settlement of construction sites in the urban. In this paper, the average index of difference in settlement and average of relative difference in settlement are defined and calculated, then plotted in the coordinate system to analyze the relative settlement behavior over time. In addition, since there was no prior knowledge of the ground, a standard to classify the clusters was needed, and the observation points were classified into using k-means clustering and Dunn Index. As a result of the analysis, it was confirmed that all the clusters moved to the stable region as the settlement amount converges. The clusters were segmented. Based on the analysis results, it was possible to distinguish between the independent displacement area and same behavior area by analyzing the correlation between measurement points. If possible to analyze the relative settlement behavior between the stations and classify the behavior areas, it can be helpful in settlement and stability management, such as uplift of the surrounding area, prediction of ground failure area, and prevention of activity failure.

• Journal of Distribution Science
• /
• v.13 no.8
• /
• pp.81-90
• /
• 2015

Purpose - To vitalize a market or develop a new one, companies frequently release new products into the market, often by shortening the time to market, called the release period. This research aims to investigate the purchase intention behavior of consumers in terms of buying new products at the time of product release based on the release speed. Research Design, Data, and Methodology - The research reviews the influence of relative advantage, complexity, and compatibility among innovative attributes of new products, as proposed by Rogers. Moreover, it examines the moderating effect of the innovative new product attributes in terms of speed of obsolescence of old products and how that influences consumer purchase behavior. Additionally, this study tests the research hypotheses using empirical analysis. Results - The analysis demonstrated that the relative predominance (H1) and suitability (H3) of new products had a statistically significant positive influence on new product purchase intention. However, the complexity (H2) of new products had a statistically significant positive influence on new product purchase intention in contrast to its predicted sign (-). The results of the moderating effect of the old product use period were as follows. H4-1 was not supported since the difference between the path coefficients of the group with the low level old product use period and the group with the high level, represented by the relationship of relative predominance and new product purchase intention, was not statistically significant. H5-1 was also not supported since the difference between the path coefficients of the group with the low level of old product use period and the group with the high level, represented by the relationship of complexity and new product purchase intention, was not statistically significant. However, H4-2 was supported since the difference between the path coefficients of the group with the low level of old product use frequency and the group with the high level, represented by the relationship of relative advantage and new product purchase intention was statistically significant. H5-2 was not supported since the difference between the path coefficients of the group with the low level of old product use frequency and the group with the high level, represented by the relationship of complexity and new product purchase intention, was not statistically significant. H6-2 was also not supported since the difference between the path coefficients of the group with the low level of old product use frequency and the group with the high level, represented by the relationship of compatibility and new product purchase intention, was not statistically significant. Conclusion - According to the results, only H4-2 among the hypotheses on the moderating effect of the old product use period and use frequency was statistically significant. Future research should focus on carrying out a detailed review of the hypothesis on the moderating effect of the old product usage period and frequency, find the cause, and connect this to potential new research.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.85-91
• /
• 2013

For location based service and context awareness services, accurate indoor positioning technology is essential. The TDOA method that uses the range difference between signal source and receivers for estimating the location of the signal source, has estimation error due to measurement error. In this paper, a new algorithm is proposed to select the real root among calculated roots using the range difference information, and the estimated position of the signal source shows good accuracy compared to the existing method.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.208-216
• /
• 1996

The esthetics of chin contour is very important in facial deformities, and the quantity of soft tissue overlying the symphysis can be helpful to the correct diagnosis and surgical treatment for optimal facial harmony. The objectives of this study is to measure the different thicknesses of skeletal and soft tissues of chin on lateral cephalometric radiographs, to obtain the mean values of normal Korean adults, and to investigate the relative proportions of skeletal and soft tissues of chin. The results were as follows ; 1. In normal Korean adults, the relative proportions of the distances of soft tissue toward skeletal tissue were 1.5 in B point and 0.95 in Pg, and there were significant difference between male and female in the relative proportion of Pg (p<0.05). The relative proportion of the distances of vertical soft tissue toward horizontal soft tissue of Me was 1.91, and there were not significant difference between male and female. 2. In normal Korean adults, the distances of skeletal and soft tissues of chin showed no correlation, but the distances of vertical and horizontal soft tissues of Me showed high correlation (p<0.01). 3. In normal Korean adults, the correlations among the distances of each skeletal and soft tissues of chin were significantly high in both of male and female (p<0.01). Among the relative proportions of the distances of skeletal and soft tissues, the correlations of the proportions of B point and Mp and the proportions of Mp and Pg were significantly high (p<0.01).

• Phonetics and Speech Sciences
• /
• v.5 no.4
• /
• pp.99-107
• /
• 2013

The purpose of this study is to examine the relative distances among English front vowels in a message produced by 47 Korean and American speakers in order to better instruct pronunciation skills of English vowels for Korean English learners. A Praat script was developed to collect the first and second formant values(F1 and F2) of eight words in each sound file which was recorded from an internet speech archive. Then, the Euclidean distances were measured between the three vowel pairs: [i-ɛ], [i-ɪ], and [ɛ-æ]. The first vowel pair [i-ɛ] was set as the reference from which the relative distances of the other two vowel pairs were measured in percent in order to compare the vowel sounds among speakers of different vocal tract lengths. Results show that F1 values of the front vowels produced by the Korean and American speakers increased from the high front vowel to the low front vowel wih differences among the groups. The Korean speakers generally produced the front vowels with smaller jaw openings than the American speakers did. Secondly, the relative distance of the high front vowel pair [i-ɪ] showed a significant difference between the Korean and American speakers while that of the low front vowel pair [ɛ-æ] showed a non-significant difference. Finally, the Korean speakers in the higher proficiency level produced front vowels with higher F1 values than those in the lower proficiency level. The author concluded that Korean speakers should produce the front high vowels distinctively by securing sufficient relative distance of the formant values. Further studies would be desirable to examine how strong the Korean speakers' English proficiency correlate with the relative distance of target words of comparable productions.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.263-266
• /
• 2018

This study was investigated the growth characteristics of 'Nongjingo' cultivar(Lentinula edodes) according to relative humidity(RH). The color difference of the pileus showed the highest L(Lightness, L) value in RH65 and the a(Redness, a) value in RH95. b(Yellowness, b) values were similar in all treatments. The hardness of pileus is highest at RH95. As the relative humidity increased, the length of pileus and stipe tended to increase. The diameter and thickness of pileus were high at RH95%. The diameter of stipe could not see the big difference in the three treatment groups. This study growth characteristics and yield were increased at higher relative humidity, but quality was decreased. Therefore, must adjust the relative humidity to produce high quality mushrooms.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.1
• /
• pp.65-72
• /
• 2002

Generally, there are laser operating equipments( aligner, stepper) and electronic microscope( SEM, TEM) as a high precision manufacturing and inspection equipment in semiconductor production companies, precision examination and measuring laboratories. Mostly, these equipments are characterized by projection and target part. The relative displacements between projection and target part are dominant roles in vibrational problem in these precision equipments. These relative displacements are determined by the position of incoming vibration and the difference of vibration response in projection and target part. In this study, the allowable vibrational limits are suggested and the vibrational reduction plans are proposed by measurement and analysis of vibration phenomenon in the Clean Room in PDP(plasma display panel) production building. The vibration performance is evaluated by comparison relative displacements between projection and target part before/after the vibration isolation plan.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3291-3296
• /
• 2010

A gelastatins (1), natural MMP inhibitors, and their hydroxamate analogues (2) in TACE enzyme evaluated for discovery of potent TACE inhibitors. We have employed molecular dynamics simulations to compute the relative free energy of hydration and binding to TACE for gelastatin (1) and its hydroxamate analogue (2). The relative free energy difference is directly described in this article using the free energy perturbation approach as a means to accurately predict the TACE inhibitor of gelastatin analogues. The results show that the good agreement between the experimental and theoretical relative free energies of binding, gelastatin hydroxamate (2) binds stronger to TACE by -3.37 kcal/mol. The desolvation energy costs significantly reduced binding affinity, hydroxamate group associated with high desolvation energy formed strong favorable interactions with TACE with more than compensated for the solvation costs and therefore led to an improvement in relative binding affinity.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.69-77
• /
• 2012

Relative density, used to express dynamics condition of sand quantitatively, is measured by RI Test, Standard Penetration Test and Cone Penetration Test. Each measurement method has demerits, which is complicated or needs a specific analysis instrument and an analysis of expert. Also the ground is in wet condition commonly because of an unsaturated zone between a saturated zone and a surface, so the behaviour of the ground has different engineering properties unlike the dry ground and it diminishes accuracy of measuring relative density. In this study, the correlation between relative density and penetration of fall cone test in dry condition and wet condition with variation of water content was analyzed and a simple measuring method for relative density was suggested. As a result, there were difference of penetration between dry sands and wet sands, the correlation between relative density and penetration showed linear expression and relative density could be measured by the linear relation.