• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.479-482
• /
• 2007

This paper presents experimental analysis of a friction-driven wheel responsible for generating wheel squeal. Creep and squeal noise generating mechanism are influenced by friction conditions of attack angle, loading force, driving velocity and surface roughness. Squeal noise phenomena has been examined under the laboratory condition by the model rig. Creep characteristics and squeal noise were observed by varying relative velocity of the wheel with respect to the rail and friction coefficient.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.577-585
• /
• 2017

To study the mechanical performances of prestressed steel-concrete composite box beam under combination of bending-shear-torsion, nine composite beams with different ratio of torsion to bending were designed. Torsion was applied to the free end of the beam with jacks controlled accurately with peripherals, as well as concentrated force on the mid-span with jacks. Based on experimental data and relative theories, mechanical properties of composite beams were analyzed, including torsional angle, deformation and failure patterns. The results showed that under certain ratio of torsion to bending, cracking and ultimate torsion increased and reached to its maximum at the ratio of 2. Three phases of process is also discussed, as well as the conditions of each failure mode.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.49-57
• /
• 2011

In many industries, the accurate and quick checking of goods in storage is of great importance. Most today's inventory checking is based on bar code scanning, but the relative position between a bar code and an optical scanner should be maintained in close distance and proper angle for the successful scanning. This requirement makes it difficult to fully automate the inventory information/control systems. The use of RFID technology can be a solution for overcoming this problem. The mobile robot presented in this paper is equipped with an RFID tag scanning system, that automates the otherwise manual or semi-automatic inventory checking process. We designed the robot system in a quite practical approach, and the developed system is close to the commercialization stage. In our experiments, the robot could collect information of goods stacked on shelves autonomously without any failure and maintain corresponding database while it navigated predefined paths between the shelves using vision.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.3
• /
• pp.163-174
• /
• 2003

The motion of 3C 120 Jet relative to the core is reasonably uniform and the VLBI scale jet connects outwards to a VLA ~ 100kpc scale. We measured the jet width variation from the center and found some indication of a power law which indicates the jet expands roughly with a constant opening angle and a constant flow velocity, $V_{f}{\cong}c$, from subparsec scales to ~ 100 kpc. With such a constant flow velocity and based on other physical parameters deduced from observed emission characteristics of the jet, we have established an equipartition jet model which might accommodate the basic parameters of the jet on subparsec scales, with which one can fit the radio intensities over all the scale of the jet even to ~100 kpc.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.11
• /
• pp.527-531
• /
• 2006

Since 1996, KEPCO has been operating a wide range lightning detection system, LPATS, and been accumulating relative application techniques and statistical analysis skills. So, KEPRI already has its own basis to develope more accurate advanced detection technology and references to do comparative study. For three-dimensional imaging of lightning channels, UHF/VHF antenna systems were installed at 2 sites. The distance between two sites is about 30 km. These systems were used the AOA(Angle of Arrival) methods for lightning detection. In this paper, we would like to introduce about our system and its results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.3
• /
• pp.231-239
• /
• 2002

Experiments on the single phase cooling heat transfer and pressure drop with microfin tubes were performed using water as a test fluid. Experimental data were obtained in the range of Reynolds number 3000 ~40000 and Prandtl number 4-6. The data of microfin tubes presented the characteristics of rough surface tube in pressure drop and heat transfer Experimental data were compared with the heat transfer and friction factor correlations of smooth tubes. Heat transfer enhancements of microfin tubes were lower than pressure drop penalty factors. The helix angle is more significant parameter in both of the pressure drop and heat transfer than the relative roughness. The correlations of Nusselt number and friction factor were suggested for the tested microfin tubes. Maximum deviations between correlations and experimental data were within $\pm15$% for Nusselt number and $\pm10$% for friction factor.

• Transactions of Materials Processing
• /
• v.12 no.3
• /
• pp.251-258
• /
• 2003

The paper deals with an analysis of an extrusion process with a divided material flow in a combined radial - backward extrusion. The paper discusses the influences of tool geometry such as punch nose angle, relative gap height, die comer radius on material flow and surface expansion into can and flange region. To analyze the process, numerical simulations by the FEM and experiment, an Al alloy as a model material have been performed. Based on the results, the influence of design parameters on the distribution of divided material flow and surface expansion are obtained.

• Journal of ILASS-Korea
• /
• v.13 no.4
• /
• pp.187-192
• /
• 2008

In this study, the mechanisms of binary droplet collision were studied with diesel, ethanol and purified water. The droplet collisions of liquid droplet have been investigated for the same droplet diameter. In order to obtain the digital images of the droplet collision behavior, the experimental equipment was composed of the droplet generating system and the droplet visualization system. The droplets were produced by the vibrating orifice monodisperse generator. The visualization system consisted of a long distance microscope, a light source, and a high speed camera. The outcomes of binary droplet collision can be divided into four regimes, bouncing, coalescence, reflexive separation and stretching separation. The impact angle and the relative velocity of binary droplet are main parameters of collision phenomena, so the transition mechanism of droplet collision can be divided by the impact parameter.

• Journal of Environmental Health Sciences
• /
• v.29 no.4
• /
• pp.48-54
• /
• 2003

This study investigated retrogradation properties of Jeungpyun substituted for cereals with dietary fibers of 60% of brown rice, and barley. Quality changes during storage periods of the functional Jeungpyun, were studied using $\alpha$-amylase iodine enzyme digestion methods, X-ray diffraction patterns, and differential scanning calorimetry (DSC). The barley substituted samples showed significantly lower retrogrdation rates than those of control when examined by $\alpha$-amylase method. The Relative crystallity by X-ray diffraction patterns had typical A type in all samples with appealing big crystallity around its diffraction angle 23$^{\circ}$degrees as storage periods were increased. The brown rice and barley Jeunpyun made smaller crystallity than that of control, representing slower retrogradation rates. The batter controls had significantly lower ΔH than the other compared samples when measured by DSC, but had significantly higher ΔH after 30 days of storage, implying that the control required more energy for regelatinization after the 30 days of storage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.275-278
• /
• 2005

This paper presents a model for evaluating the contribution by arch action and frame action to shear resistance in shear-critical reinforced concrete beams without stirrup. The rotating angle softened truss model is employed to calculate the shear deformation of the web and the relative axial displacement of the compression and tension chord by the shear flow are also calculated. From this shear compatibility condition in a beam, the shear contribution by the arch action is numerically decoupled. The transverse strain obtained from the proposed model is selected for shear failure criterion. Using the failure criterion, shear strength of RC slender beams without stirrup is predicted.