• Honam Mathematical Journal
• /
• v.21 no.1
• /
• pp.139-147
• /
• 1999

In this paper we generalize the definition of strongly close-to-convex functions by using the functions g(z) of bounded boundary rotation and investigate the distortion and rotation theorem, coefficient inequalities, invariance property and inclusion relation for the new class $G_{k}[A,\;B]$.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.90-96
• /
• 2002

A novel methodology on the calculations of osmotic pressure and gradient diffusion coefficient has been provided ill the present study, by applying a succinct numerical analysis on the experimental results. Although both the osmotic pressure and the gradient diffusion coefficient represent a fundamental characteristic in related membrane filtrations such as microfiltration and ultrafiltration, neither theoretical analysis nor experiments can readily determine them. The osmotic pressure of colloidal suspension has been successfully determined from a relationship between the data of the time-dependent permeate flux, their numerical accumulations, and their numerical derivatives. It is obvious that the osmotic pressure is gradually increased, as the particle concentration increases. The thermodynamic coefficient was calculated from the numerical differentiation of the correlation equation of osmotic pressure, and the hydrodynamic coefficient was evaluated from the previously developed relation for an ordered system. Finally, the estimated gradient diffusion coefficient, which entirely depends on the particle concentration, was compared to the previous results obtained from the statistical mechanical simulations.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.8-17
• /
• 2015

In this research, low fidelity air/heat load analysis was conducted for the intake of high speed vehicle. For air/heat load calculations, aerodynamic properties at the surface and the boundary layer edge were estimated using Taylor-Maccoll equation for conical flow, shockwave relation and Prandtl-Meyer expansion equation for internal and external flow. Couette flow assumption and Reynolds analogy were used in order to calculate convective heat transfer coefficient. In order to calculate skin friction coefficient for heat transfer coefficient analysis, Van Driest method II and Reference Enthalpy method were considered. An axis symmetric SCRAMJET model was selected as a reference configuration for verifying the proper implementation of the present method. Comparison of the results using the present method and Computational Fluid Dynamic analysis showed that the present method is valuable for efficiently providing pressure and heat loads for air-intake structure design of the high speed air vehicle.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.643-648
• /
• 2012

There are lots of analysis to determine the relation between dependent variable and explanatory variables. Often the regression analysis is used to do this, and we can analyze the how much the explanatory variable can be related with dependent variable and how much the regression model can explain the data. But the validation check of regression model is usually determined by coefficient of determination. We should check the validation of regression coefficient with different methods. This paper introduces the method for validation check the regression coefficient using the jackknife regression and bootstrap regression in clinical data.

• Ocean Systems Engineering
• /
• v.10 no.2
• /
• pp.163-179
• /
• 2020

Considering the huge demand of several types of subsea equipment, as Christmas Trees, PLEMs (Pipeline End Manifolds), PLETs (Pipeline End Terminations) and manifolds for instance, a critical phase is its installation, especially when the equipment goes down through the water, crossing the splash zone. In this phase, the equipment is subject to slamming loads, which can induce impulsive loads in the installation wires and lead to their rupture. Slamming loads assessment formulation can be found in many references, like the Recommended Practice RP-N103 from DNV-GL (2011), a useful guide to evaluate installation loads. Regarding to the slamming loads, RP-N103 adopt some simplifying assumptions, as considering small dimensions for the equipment in relation to wave length, in order to estimate the slamming coefficient C_S used in load estimation. In this article, an experimental investigation based on typical subsea structure dimensions was performed to assess the slamming coefficient evaluation, considering a more specific scenario in terms of application, and some reduction of the slamming coefficient is achieved for higher velocities, with positive impact on operability.

• Journal of Environmental Science International
• /
• v.17 no.11
• /
• pp.1211-1220
• /
• 2008

In this study, we estimated, the equivalent roughness using an estimation model, which considered grain distribution on the bed and the protrusion height of the grains. We also reviewed the appropriateness of the estimated equivalent roughness at the Goksung and Gurey station in the Seomjin River. To review the appropriateness of this model, we presented the water level-discharge relation curve applying the equivalent roughness to the flow model and compared and reviewed it to observed data. Also, we compared and reviewed the observed data by estimating the Manning coefficient n, the Chezy coefficient C, and the Darcy-Weisbach friction coefficient f by the equivalent roughness. The calculation results of the RMSE showed within 5% error range in comparison with observed value. Therefore the estimated equivalent roughness values by the model could be proved appropriate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1095-1100
• /
• 2003

The wavelet transform pair used simultaneously when two wavelets are designed to form an approximate Hilbert transform pair provide excellent property than present DWT(discrete wavelet transform), especially in field that detect wide-band signals like pulse and increase the bit rate at the same bandwidth. In this paper, the two dyadic wavelet bases which form an approximate Hilbert transform pair were designed, and flat delay filter which has the truncated coefficient vector is used in order that the two filters can form Hilbert transform relation in the process of design.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.5
• /
• pp.3-15
• /
• 2006

The purpose of the study is to determine grid cell of radar relationship, and to promote the radar data on hydrology field. The study region is the Chungjudam basin with a drainage area of $6,648km^{2}$ located within the 260 km circle under the DWSR-88C C-band umbrella(Kwanak Mt Radar). Grid cell was produced to extract radar reflectivity and rainfall data of the same time and point using Arc-view software package. The grid cell size is to estimate mean correlation coefficient for $1km{\times}1km,\;2km{\times}2km,\;3km{\times}3km$ grid. The result of mean correlation coefficient showed good result(0.57) for the $1km{\times}1km$ grid cell. The 32 rainfall stations Z-R relationship was estimated in Chungjudam basin.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2004-2007
• /
• 2002

In the linear combination type stereophonic echo canceller, it is known not to converge the coefficient vector of the adaptive filter to a correct echo path. In this report, we analyze the convergence value of the filter coefficient vector of the stereo echo canceling algorithm using input signals of all channels in relation to this problem. In this analysis, one of the two inputs to the un-known system and adaptive one are assumed to be a delayed and attenuated version of the other signal as a model of the input signal with a strong cross-correlation. As a result, it is shown for the coefficient vectors not to converge to echo paths, and nor to converge to the value which depends on the time delay and the attenuation of the input signal. We show that the computer simulation result are corresponding to our analytical results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.130-137
• /
• 2004

The ultrasonic attenuation coefficients were measured by interfacial crack length in the adhesive components of double-cantilever beam(DCB). The energy release rate, G, was obtained by the experimental measurement of compliance. The numerical analysis by the boundary element method(BEM) and Ripling's equation was investigated. The experimental results represent that the relation between interfacial crack length for the ultrasonic attenuation coefficient and energy release rate is increased proportionally. A measurement method of the interfacial crack length by the ultrasonic attenuation coefficient was proposed and discussed.