• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.5
• /
• pp.635-643
• /
• 2003

Parametric study for the analysis of performance characteristics of a planar -type solid oxide fuel cell(SOFC) using computational flow analysis is conducted. A planar -type SOFC, which is composed by two gas channels (fuel and ai.) and one set of anode-electrolyte-cathode assembly, is modeled as a two -dimensional isothermal case. Results of computational analysis of flow field including distributions of mass fractions in gas channels are used to the performance analysis of the fuel cell. Flow analysis makes it possible to consider current density distributions along the length of the cell in the process of performance analysis of the SOFC. As results of parametric study, it is found that the mole fraction of fuel at the inlet of fuel channel, operating pressure and temperature are closely related to the performance characteristics of SOFC.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.94-96
• /
• 2002

In order to achieve the radiotherapy more precisely using highly energetic heavy charged particles, it is important to know the distribution of the electron density in a human body, which is highly related to the range of charged particles. We can directly obtain the 2-D distribution of the electron density in a sample from a heavy ion CT image. For this purpose, we have developed a heavy ion CT system using a broad beam. The performance, especially the position resolution, of this system is estimated in this work. All experiments were carried out using the heavy ion beam from the HIMAC. We have obtained the projection data of polyethylene samples with various sizes using He 150 MeV/u, C 290 MeV/u and Ne 400 MeV/u beams. The used targets are the cylinders of 40, 60 and 80 mm in diameter, each of them has a hole of 10 mm in diameter at the center of it. The dependence of the spatial resolution on the target size and the kinds of beams will be discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.4
• /
• pp.504-511
• /
• 2000

PIV(Particle Image Velocimetry) is a recently developed technique for visualizing the fluid velocity fields. Because it has several advantages over the LDV(Laser Doppler Velocimetry), it became one of the most popular diagnostic tools in spite of its short history. However, its application to combustion is restricted by some problems such as flame illumination, scattered light refraction, particle density variation due to heat release, the combined effect of abrupt change in particle density and fluid velocity on flame contour, and thermophoresis which is particle lagging due to temperature gradient. These problems are expected to be originated from the non-continuous characteristics of flames and the limitations of particle dynamics. In the present study, these problems were considered for the visualization of the instantaneous coaxial hydrogen diffusion flame. And the instantaneous flame contour was detected using particle density difference. The visualized diffusion flame velocity field shows its turbulent and meandering nature. It was also observed that the flame is located inside the outer shear layer and flame geometry is largely influenced by the vorticity.

• Women's Health Nursing
• /
• v.21 no.1
• /
• pp.43-54
• /
• 2015

Purpose: This study was conducted to identify the problem of bone health and potential influencing factors of bone mineral density (BMD) for women across the life cycle of menopause. Methods: Complex sampling design data analysis was performed on the fifth Korea National Health and Nutrition Examination Survey 2010 in order to identify the problems with bone health, BMD and its influencing factors in 3,499 women who answered the menopausal status. Women's life cycle was categorized by premenopausal, postmenopausal, and elderly. Results: 35.1% of premenopausal women, 73.3% of postmenopausal women, and 96.0% of elderly women had problems with bone health that were related to low BMD. Influencing factors of BMD were residential area, alcohol drinking, and body mass index (BMI) for premenopausal women; age, residential area, education, marital status, income, and BMI for postmenopausal women; and age, education, and BMI for elderly women. Conclusion: Problems with bone health required to be considered as a major health problem in all women regardless their life cycle. Interventions to maximize BMD need to be developed by considering its influencingfactors across the women's life cycle.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.45.2-45.2
• /
• 2018

CS molecule is known to be adsorbed onto dust in cold dense cores, causing its significant depletion in the center region of cores. This study is aimed to investigate the depletion of CS molecule with optically thin $C^{34}S$ molecular line observations, including significance of its differentiation depending on the evolutionary status of the dense cores. We mapped five evolved starless cores, L1544, L1552, L1689B, L694-2 and L1197 using two molecular lines, $C^{34}S$ (J=2-1) and $N_2H^+$ (J=1-0) with NRO 45 m telescope. The $H^2$ column density and temperature structures of each targets were obtained by SED fitting for Herschel continuum images and the internal number density profiles by model fitting. All of the integrated intensity maps of $C^{34}S$ show depletion holes and 'semi-ring-like' distribution, indicating that the depletion of CS is clear and general. The radial profiles of CS abundance also show significant decrease towards the core center, while $N_2H^+$ abundance is almost constant or enhanced. We find that the more evolved cores with higher $H^2$ density tend to have a stronger depletion of CS. Our data strongly support claims that CS molecule generally depletes out in the central regions of starless dense cores and such chemical differentiation is closely related to their evolution.

• Journal of the Korean Ceramic Society
• /
• v.50 no.3
• /
• pp.180-185
• /
• 2013

We investigated the characteristics of hot-pressed pure yttria ceramics, and annealed them in an oxidation atmosphere. Regardless of the heat treatment in the oxidation atmosphere, XRD analysis showed that all the samples had a $Y_2O_3$ phase without structural change. Even though the color variation of the hot-pressed $Y_2O_3$ ceramics was due to the sintering temperatures, the oxidation process turned the color of the $Y_2O_3$ ceramics into white. The color change during oxidation treatment appears to be related to oxygen defects. In addition, oxygen defects also affected the weight change and microstructure of the $Y_2O_3$ ceramics. The $Y_2O_3$ ceramic sintered at $1600^{\circ}C$ had a $5.03g/cm^3$ density, which is close to the theoretical density of $Y_2O_3$. As the sintering temperature increased, small homogeneous grains grew to large grains which affected the Vickers hardness. $Y_2O_3$ ceramics hot-pressed at $1600^{\circ}C$ and annealed at $1200^{\circ}C$ had a flexural strength of 140MPa.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.68-77
• /
• 1995

Characteristics of electron cyclotron resonance (ECR) plasma thermal oxide grown at low-temperature have been investigated. The effects of several process parameters such as substrate temperature, microwave power, gas flow rate, and process pressure on the growth rate of the oxide have been also investigated. It was found that the plasma density, reactive ion species, is strongly related to the growth rate of ECR plasma oxied. It was also found that the plasma density increases with microwave power while it decreases with decreasing O2 flow rate. The oxidation time dependence of the oxide thichness showed parabolic characteristics. Considering ECR plasma thermal oxidation at low-temperature, the linear as well as parabolic rate constants calculated from fitting data by using the Deal-Grove model was very large in comparison with conventional thermal oxidation. The ECR plasma oxide grown on (100) crystalline-Si wafer exhibited good electrical characteristics which are comparable to those of thermal oxide: fixed oxide charge(N$_{ff}$)= 7${\times}10^{10}cm^{-2}$, interface state density(N$_{it}$)=4${\times}10^[10}cm^{-2}eV^{-1}$, and breakdown field > 8MV/cm.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.197-202
• /
• 2014

Positive plate was composed of lead hydroxide via reaction between lead oxide and $H_2O$ and lead sulfate was formed of the reaction of lead hydroxide with sulfuric acid. And its density is $3.8g/cm^3$, $4.0g/cm^3$, $4.2g/cm^3$ and $4.4g/cm^3$ by controlling volume of refined water. Curing of positive plate is done for low ($45^{\circ}C$, 40hr, over 95% of relative humidity) & high ($80^{\circ}C$, 40hr, over 95% of relative humidity) temperature, which created 3BS & 4BS active materials. Experimental result of DOD with 100% life cycle test shows that it was not related to the density of active materials but to the low & high temperature aging of active materials. The test makes us to understand that the crystallization which is made by curing of active materials is a more of a main factor than density of active materials under the deep cycle using circumstances. The active materials which were from the high temperature curing are better for deep cycle performance.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.592-603
• /
• 2000

This paper is concerning off-line signature verification using a density function which is obtained by convolving the signature image with twelve-directional $5\times{5}$ gradient masks and the weighted fuzzy mean classifier. The twelve-directional density function based on Nevatia-Babu template gradient is related to the overall shape of a signature image and thus, utilized as a feature set. The weighted fuzzy mean classifier with the reference feature vectors extracted from only genuine signature samples is evaluated for the verification of freehand forgeries. The experimental results show that the proposed system can classify a signature whether it is genuine or forged with more than 98% overall accuracy even without any knowledge of varied freehand forgeries.

• Applied Microscopy
• /
• v.27 no.2
• /
• pp.155-163
• /
• 1997

Ultrastructural and histochemical studies were carried out on the prostate gland of a Korean slug (Incilaria fruhstorferi) with light and electron microscopes. The results are as follows. The endothelial tissue of the prostate gland is constituted with tall and narrow ciliated columnar cells, irregularly shaped cells and gland cells in which are included the elongated oval or ellipsoid nucleus those are surrounded by curved membrane. The endothelial tissue of the prostate gland is composed by type-A, B, C and type-D gland cells, and the glanules of type-A, B, and D gland cells are certified to neutral mucopolysaccharide because are related by PAS-alcian blue (pH 2.5) , but the other hand type-C gland cell is only weakly reacted to PAS, but strongly reacted by Million reaction. The glanules of type-A gland cell are small size (about $0.4{\mu}m$) and are seen high electron density, but the glanules of type-B gland cell are large size (about $0.7{\mu}m$) and glanule density is same type-A glanules. Long ellipsoid type-C gland cell contained round nucleus which is well developed beterochromatin in, and that small oval glanules (size, about $0.9{\mu}m$) of moderate high electron density which are formed a group of large glanule together with $4\sim5ea$, but type-D gland cell possessed round small nucleus are seen high electron dense glanules (size, $0.8{\mu}m$).