• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1C
• /
• pp.11-17
• /
• 2011

This study was performed a series of the isotropic compression-expansion tests and the drained triaxial tests with various the relative densities 25%, 50%, 80% and 100% for Baekma river sand. Using the tests results the characteristic of the parameters of Lade's single hardening constitutive model were investigated. The soil parameters Kur and n representing elastic behavior are not much affected by the change of the relative density. The other parameters such as failure criterion (m, ${\eta}_1$), hardening function (C, p) and plastic potential (${\Psi}_2$, ${\mu}$) are in a positive linear relationship with the relative density. Since the soil parameters h and $\alpha$ representing yield function do not change much to the change of relative density and also closely related to failure criterion, they can be replaced by failure criterion ${\eta}_1$. We also observed that predicted values from the Lade's single hardening constitutive model were well consistent with the observed data.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.17 no.3
• /
• pp.334-342
• /
• 2010

Purpose: The purpose of this study was to examine the effects of Tai Chi exercise on flexibility, balance, walking ability, muscle strength, bone mineral density, and fracture risk in institutionalized elders. Method: A quasi-experimental pretest-posttest design with a nonequivalent comparison group was utilized, and 53 older adults living in one institution were recruited and assigned to one of two groups, experimental group (18) or comparison (20). Both groups completed posttest measures at 6 months. There was a 31% rate of dropouts. Tai Chi exercise was provided twice a week for 24 weeks. Outcome measurements were conducted by a physiotherapist at a university hospital health promotion center who did not know the group assignment. Results: At 6 months, the experimental group had significantly greater grip strength(t=2.12, p=.04), back muscle strength (t=2.42, p=.02), balance (t=5.31, p<001), and flexibility (t=3.57, p<.001). They also showed significantly greater bone mineral density of lumbar spine and femur, and reduced fracture risk. Conclusion: Tai Chi exercise was safely and effectively used with institutionalized elders for 6 months and significantly improved physical fitness, bone mineral density along with a reduction in fracture risk. Whether Tai Chi exercise would lead to prevention of fall episodes and fall related fractures in this population will require further study.

• Journal of Fashion Business
• /
• v.24 no.3
• /
• pp.30-39
• /
• 2020

This study was conducted to identify problems in domestic flame-retardant performance specifications. Currently, the domestic wallcovering anti-inflammatory regulations are not prepared for damage caused by smoke, with the carbonized area as the main function. In particular, given that smoke is the main cause of human casualties and injuries in a fire, it is reasonable that the flame density and toxicity of the wallcovering should also be the main performance indicators. The scope and method of research in this study were as follows. First, a prior study related to fire on various wallcoverings was considered. Second, it raised questions about the effects of smoke in the event of a fire and domestic anti-inflammatory performance tests. Third, textile wallcovering samples were manufactured with viscose rayon for experimental verification of the problems and tested by Korean and EU standards without flame retardant processing to analyze the differences between each regulation. Fourth, the performance of flame retardant wallcovering according to Korean standards was evaluated using smoke density and harmful gas testing methods. The results of each test were as follows. Non-fire retardant wallcovering was rejected by Korea standards. However, B-s1.d0 in Europe. Smoke density testing and harmful gas by domestic combustion processing on the same sample showed that the smoke density increased about 4.3 times more than before, and the harmful gas test showed that the suspension of the post-processing sample slowed earlier than the non-processed sample.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.

• Journal of Powder Materials
• /
• v.28 no.1
• /
• pp.20-24
• /
• 2021

Ti-based alloys are widely used in biomaterials owing to their excellent biocompatibility. In this study, Ti-Mn-Cu alloys are prepared by high-energy ball milling, magnetic pulsed compaction, and pressureless sintering. The microstructure and microhardness of the Ti-Mn-Cu alloys with variation of the Cu addition and compaction pressure are analyzed. The correlation between the composition, compaction pressure, and density is investigated by measuring the green density and sintered density for samples with different compositions, subjected to various compaction pressures. For all compositions, it is confirmed that the green density increases proportionally as the compaction pressure increases, but the sintered density decreases owing to gas formation from the pyrolysis of TiH2 powders and reduction of oxides on the surface of the starting powders during the sintering process. In addition, an increase in the amount of Cu addition changes the volume fractions of the α-Ti and β-Ti phases, and the microstructure of the alloys with different compositions also changes. It is demonstrated that these changes in the phase volume fraction and microstructure are closely related to the mechanical properties of the Ti-Mn-Cu alloys.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.5
• /
• pp.326-339
• /
• 2022

Recently, not only Korea but also the world has been suffering from problems related to coastal erosion. The hard defense method has been primarily used as a countermeasure against erosion. However, this method is expensive and has environmental implications. Hence, interest in other alternative methods, such as the eco-friendly vegetation method, is increasing. In this study, we aim to analyze the hydraulic characteristic of submerged rigid vegetation according to the cross-sectional change through a hydraulic experiment and numerical simulation. From the hydraulic experiment, the reflection coefficient, transmission coefficient, and energy dissipation coefficient were analyzed according to the density, width, and multi-row arrangement of the vegetation zone. From numerical simulations, the flow field, vorticity distribution, turbulence distribution, and wave distribution around the vegetation zone were analyzed according to the crest depth, width, density, and multi-row arrangement distance of the vegetation zone. The hydraulic experiment results suggest that the transmission coefficient decreased as the density and width of the vegetation zone increased, and the multi-row arrangement condition did not affect the hydraulic characteristics significantly. Moreover, the numerical simulations showed that as the crest depth decreased, the width and density of vegetation increased along with vorticity and turbulence intensity, resulting in increased wave height attenuation performance. Additionally, there was no significant difference in vorticity, turbulence intensity, and wave height attenuation performance based on the multi-row arrangement distance. Overall, in the case of submerged rigid vegetation, the wave energy attenuation performance increased as the density and width of the vegetation zone increased and crest depth decreased. However, the multi-row arrangement condition did not affect the wave energy attenuation performance significantly.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2015

PURPOSE: This study examined the effect of the combined exercise program on physical fitness and related hormone in elderly women. METHODS: The subjects included 40 elderly women who reside at B city. Upon thire agreements, the subjects were divided into either an experimental group and the control group. there 20 subjects in each. The combined exercise program was conducted during the 8 weeks, and the experimental group was underwent its associated program 5 times a week. there wear 2 subjects from each group that were excluded. The physical fitness wear measured and the related hormone(growth hormone, DHEA) were taken with blood serum density. RESULTS: After 8 weeks for intervention, there were statistically significant differences between in physical fitness and growth hormone, DHEA in experimental group(p<.05). however, this difference was not significantly different in the control group. Futher, there wear statistically significant difference between two group of all item(p<.05). CONCLUSION: The findings of this study show that combined exercise program helps the physical fitness and increase of growth hormone, DHEA in elderly women. In conclusion, the regular combined exercise program for 8 weeks is effective for increase physical fitness and related hormone in elderly women, and positive influence upon, thereby being thought to be able to lower risk in aging and weakness.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.809-817
• /
• 2010

The primary purpose of this study was to investigate high school students' conceptual understanding of density for solids and liquids in pure and mixed substances who had preceded formal school science instruction on density and related topics. A concept assessment on density was developed and administered by demonstrative experiments accompanied by a written assessment test method to 120 general high school students in a metropolitan city. The scientific conceptions and alternative conceptions from students' responses were identified and the percentages of them were calculated. Then, their alternative conceptions and implicit theories on density were analyzed. About half of the students couldn't differentiate weight-volume-density and regarded density as an innate property of matter. Furthermore, the greater the number of variables involved in an experimental condition of the question, the more complicated and undifferentiated students' density concepts were. Students employed more improper variables such as particle size, intermolecular distance, surface tension, polarity of the solvent, etc. in explaining counter-intuitive observations. The implications for school science instruction were discussed.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.455-469
• /
• 2007

The study area, Bonggil-ri, Gyeongju, SE Korea, is composed of Cretaceous sedimentary rocks, and Tertiary igneous rocks and dykes. A research on fracture developing history and density distribution was carried out on well exposed Tertiary granites. The fractures developed in this area have the following sequence; NW-SE trending duo-tile shear bands (set a), NNW-SSE trending extensional fractures (set d), WNW-ESE trending extensional or normal fractures (set b), NE-SW trending right-lateral fractures (set c), WNW-ESE trending reverse fault reactivated from normal faults (set e) and NW-SE trending left-lateral faults reactivated from shear bands (set a) under brittle condition. According to the result of fracture density analysis, the fracture density in this area depends on rock property rather than rock age, and also higher fracture density is observed around fault damage zones. However, this high fracture density may also be related to the cooling process associated with dyke intrusion as well as rock types and fault movement. Regardless of the reason of the high fracture density, high fracture density itself contributes to fluid flow and migration of chemical elements.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.478-483
• /
• 2010

Bisphosphonates are synthetic analogue and have high affinity on bone remodeling site. Since they have a long half-reduction time, they accumulate at bone and act for a long time. They are widely used in osteo-porosis derived from imflammatory bowel disease or postmenopausal osteoporosis patient for bone mineral density improvement. In addition, they neutralize hypercalcemia owing to bone metastasis of malignancy. However, a jaw bone necrosis was recently reported in some patients who have taken bisphosphonates for a long time. It is called Bisphosphonate Related Osteonecrosis of Jaws (BRONJ). It can come spontaneous-ly, but more often after oral surgery including tooth extraction. In this case, a 80-year-old woman was treated with bisphosphonate (sodium alendronate) for 2 years to improve bone mineral density. She had her left lower second molar tooth extracted at local clinic. After extraction, she had inflammatory symptoms like a pain, a cheek swelling, and a discharge of pus. She was referred to our clinic for treatment. We treated meticulously from dressing to surgery. After following up about 1.5 years, the jaw lesion was successfully healed. So we report this case.