• Journal of Community Nutrition
• /
• v.7 no.1
• /
• pp.49-57
• /
• 2005

Nutrition factors play an important role in the pathogenesis of osteoporosis. The purpose of this study is to investigate the relationship between nutritional status and bone mineral density of elderly women. Three hundred thirty five elderly women (over 65 years) in Asan were divided into three age groups (group 1, less than 70 y ; group 2, from 70 to 75 y ; group 3, 75 y or more). Total alkaline phosphatase and serum calcium (Ca) were analyzed using spectrophotometric procedure. Data for food and nutrient intakes were obtained by a 24-hour recall method. Bone density was measured by broadband ultrasound attenuation (BUA) using QUS-2. Age differences were tested with the X 2 test for categorical variables and with ANOVA and Tukey's test for continuous variables. Correlation was conducted to test the association between bone density and nutrient intake. The subjects in age groups 1,2 and 3 were $36.7\%$, $32.8\%$ and $30.4\%$, respectively. Height and body weight of the subjects were significantly decreased with age. Average bone density of the subjects in group 3 was lower than the other age groups. Osteoporosis determined by t-score is $17.9\%$ for group 1, $24.5\%$ for group 2 and $55.9\%$ for group 3 (p < 0.001). The serum Ca level of the subjects in group 2 was significantly lower than that of group 1 although mean values in all age groups are within the normal range. Dietary Ca intake, nutrient adequacy ratio (NAR) and index of nutrient quality (INQ) were decreased with age. Bone density was negatively correlated with age (p < 0.001), while body mass index (p < 0.01) was positively related with bone density. Although partial correlation did not reveal the significant correlation of BMD and dietary calcium after controlling for age, since calcium intake was very poor compared to sodium and phosphorous intakes, recommendation of more calcium intake for elderly women especially those over 75 years must be continuously emphasized.

• The Journal of Korean Medicine
• /
• v.29 no.3
• /
• pp.11-20
• /
• 2008

Objectives: Warm-needling is a method combining the effects of acupuncture with the effects of moxibustion. We need to standardize the characteristics of warm-needling in order to achieve consistency in its operational mechanisms and effects, which will improve clinical ability in the field of Eastern medicine. Methods: In this study, using the LabVIEW system on the warm-needling technique, we measured and compared partial temperature changes which varied according to the density of the moxa cone and the moxa cone's core peak temperature. Results& Conclusions: Examination of the warm-needle's partial temperature in relation to the cone density of the 0.8g moxa specimen suggests that a lower density of the moxa cone corresponds to a higher peak temperature and but with a shorter duration. During the effective stimulus time, the lower the density of the moxa cone, the shorter the duration of the effective stimulus time and the higher the mean temperature. Conversely, the higher the density of the moxa cone, the longer the effective stimulus time and lower the mean temperature.

• Journal of the Korean Geographical Society
• /
• v.43 no.1
• /
• pp.117-133
• /
• 2008

Although development density control has received murk attention in urban planning, there has been little research on empirical methods that can examine local changes in development density. Recently, attempts have been made to develop cellular automata (CA) models that can be applied to urban landuse change. This paper aims to develop an extended landuse change model based on urban CA considering development density. The proposed model not only includes density control component in a model framework, but also directly estimates local density changes in land use. The developed model was applied to the study area, which was a part of central Seoul. The calibration of the model was carried out over the period $1900s\sim2000s$ using parcel-based land use data and related variables The results of the calibrated model have been tested by comparison with actual landuse data, and have demonstrated that the developed model can produce realistic simulations of urban landuse changes. But model output is dependent on the spacio-temporal resolution of input data. Further research is necessary to improve the calibration procedure and methods for evaluating model validity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.4
• /
• pp.549-554
• /
• 2016

The present study was conducted to investigate whether dietary essential oils could affect growth performance, relative organ weights, cecal microflora, immune responses and blood profiles of broiler chickens fed on diets containing different nutrient densities. A total of eight hundred-forty 1-d-old male broiler chicks were randomly allotted into twenty-eight pens (7 pens per treatment, 30 chicks per pen). There were four experimental diets containing two different nutrient densities and supplemented with or without essential oils. Experimental period lasted for 35 days. No clear interaction between nutrient density and essential oils on any of growth performance-related parameters was observed. Live body weights were affected (p<0.05) by nutrient density at 21 days and by dietary essential oils at 35 days. Essential oils significantly (p<0.05) increased daily body weight gain and feed conversion ratio during the periods of 22 to 35 and 1 to 35 days, but failed to affect feed intake during the entire experimental period. Daily weight gain at 1 to 21 days and feed intake at 1 to 21 and 1 to 35 days were significantly impaired (p<0.05) by nutrient density. There were significant treatment interactions (p<0.05) on relative weights of bursa of Fabricius and abdominal fat contents. Finally, either essential oil or nutrient density did not influence the relative percentages of breast and leg meats, the population of cecal microflora, blood parameters and antibody titers against Newcastle disease and infectious bronchitis in broiler chickens. It was concluded that dietary essential oils, independent to nutrient density, failed to stimulate feed intake, but increased growth performance in broiler chickens.

• Journal of Acupuncture Research
• /
• v.25 no.5
• /
• pp.167-189
• /
• 2008

This study was conducted to investigate the factors which are related to Bone Mineral Density(BMD) of female for prevention of osteoporosis. We measured the BMD of lumbar spine(L2-L4) and femoral neck in 4802 female, using dual energy X-ray absorptionmetry(DEXA; DPX-alpha. Lunar, U.S.A.). and then analysed the 9 factors-age group, body mass index(BMI), amount of smoking, drinking, exercise, sleep, and fast blood sugar-which are related to BMD of female. The following results were obtained : 1. In age group, T-score was the highest at 36－42(六七) years group in lumbar spine(L2-L4) and at 15－21(三七) years group in femoral neck. and then it was decreased rapidly after 43－49(七七) years group in both lumbar spine(L2-L4) and femoral neck. Therefore we concluded that T-score of female in lumbar spine(L2-L4) and femoral neck change according to age group in $\ll$Hwangjaenaekyong Somun; 黃帝內經 素問$\gg$. 2. In BMI, T-score of lumbar spine(L2-L4) and femoral neck were increased according to BMI increase. 3. In amount of drinking and smoking, T-score was highest in heavy groups(women who have drunk soju more than 4 bottles for a week) in both lumbar spine(L2-L4) and femoral neck. But there t was no significant difference in comparison according to age group. 4. In exercise, T-score was higher in exercising group than non exercising group. And it appeared that women who have taken proper exercise had higher T-score than women who have taken exercise daily. 5. T-score was higher in women who ordinarily sleep well in both lumbar spine(L2-L4) and femoral neck than sleep badly. And there was significant difference in 43-56 years group. 6. T-score was low in the group that exceed 110mg/dl in fast blood sugar. Conclusions : The age group in $\ll$Hwangjaenaekyong Somun; 黃帝內經 素問$\gg$ is related to BMD of women. And risk factors-BMI, exercise, sleep, fast blood sugar, thyroid disease-are related to BMD of women. Therefore we expect that this study will help for prevention of osteoporosis of women, and further study will be achieved.

• Journal of Nutrition and Health
• /
• v.32 no.8
• /
• pp.935-945
• /
• 1999

The factors affecting bone mineral density (BMD) of 103 rural women aged 30 to 76 years were investigated. Data for food and nutrient intake was obtained by 24-hour recall method. BMD of lumbar spine(L1-L4), femoral neck, ward's triangle and trochanter was measured by XR-series x-ray bone densitometer. Serum was collected and analyzed for total Ca, P and ionized Ca (Ca++)content. Relationship between the factors and BMDs was analyzed by Pearson's correlation coefficient(r) and multiple regression analysis. The results are summarized as follows. 50% of the subjects under 50 years of age($\leq$49 yr group) and 86.4% of the subjects from 50 up($\geq$50yr group) were classified as osteopenia or osteoporosis. Mean body weight, height and BMI were 153.1cm, 59.1kg and 25.0kg/$m^2$ in $\leq$49 yr group and 151.9cm, 55.9kg, and 24.2kg/$m^2$ in $\geq$50 yr group. BMDs of lumbar spines and femurs ranged from 0.84 to 1.05g/$m^2$ and from 0.67 to 1.16g/$m^2$ in $\leq$49 yr group, and ranged from 0.67 to 0.85kg/$m^2$ and from 0.68 to 0.44g/$m^2$ in $\geq$50 yr group, respectively. On the whole, the BMDs were reduced to 83.8 to 94.2% of peck bone mass in $\leq$49 yr group and 55.2 to 78.9% of those in $\geq$50 yr group. Mean daily intake of Ca was much less than the Korean RDA, \67.2% in $\leq$49 yr group and 62.3% in $\geq$50 yr group. The average concentration of total Ca, P and Ca++ in serum were within normal range in both age group. Both age and height were significantly related with BMD in both age group but the relationship tended to be stronger in $\geq$50 yr group than in $\leq$49 yr group. Body weight was also a potent determinant of BMD only in 50 yr group. In $\leq$49 yr group, total food intake was positively related with BMDs of ward's triangle, L1 and L2 and intake of cereals and grain products, sugars and sweets, milk and dairy products was positively related with BMDs measured in this study. On the contrary, intake of eggs, oil and fats were positively related with a few BMDs in 50 yr group. The BMDs were positively affected by intake of energy, protein, carbohydrate, Ca, P and Fe in $\leq$49 yr group and those of protein, fat Ca, P, vitamin B1, vitamin B2 and vitamin C in $\geq$50 yr group. It was noteworthy that serum Ca++ concentration was positively related with BMDs of lumbar spine in boty age groups. According to multiple regression analysis, the four factors, age, body weight, height and BMI additionally accounted for 21% of the variance in BMD of trochanter in $\leq$49 yr group and only two factors, age and C a intake accounted for 38% of that of femoral neck in $\geq$50 yr group. Further investigation is necessary to make sure of the relations between BMD and serum Ca++ level.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.175-181
• /
• 2014

This study was conducted to evaluate stand density-specific and generalized allometric equations, and biomass expansion factors (BEFs) for two stand densities (high density of 47-year-old: $667tree{\cdot}ha^{-1}$; low density of 49-year-old: $267tree{\cdot}ha^{-1}$) of Cryptomeria japonica plantations in Namhae-gun, located in the southern Korea. Biomass in each tree component, i.e. foliage, branch, and stem, was quantified by destructive tree harvesting. Allometric regression equations of each tree component were significant (P<0.05) with diameter at breast height (DBH) accounting for 80-96% of the variation except for branch biomass in high density or foliage and cone biomass in low density. Generalized allometric equations can be used to estimate the biomass of C. japonica plantations because the slopes of allometric equations were not significantly different by the stand density. The biomass expansion factors (BEFs) were significantly lower in the high stand density (1.33) than in the low stand density (1.50). The results indicate that BEFs were affected by different stand density, while allometric equations were little related to the stand density.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.58-68
• /
• 2000

In this paper, a mathematical model of describing oxygen density in multi-band type reheating furnaces was presented. Model designed in this paper was composed of majorly two parts. One is a model regarding 'variation of existing gas'. The other is a model of showing 'variation of oxygen content'. Each model is designed by considering four factors related to variation of oxygen density based on chemical reaction, fluid dynamics and fuzzy theory. Four factors to be considered are combustion reaction in burner, fluid transfer between adjacent combustion bands, fluid transfer from furnace's inner space to external space, and input of external air via gates. According to simulation results, it was shown that varying pattern of oxygen density in each combustion band is similar to generally expected operation data in reheating furnace.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.746-751
• /
• 2002

In order to make clear the physical relation among the arc plasma, the anode heat transfer and the weld penetration, the results of experimental measurements of temperatures of arc plasma, the distributions of heat input and current on the anode and the weld penetration were presented The experimental results showed that the electron temperature above the anode and current and heat input density on the anode was dominated by the position of the cathode. Furthermore, it was showed that electron temperature of arc plasma was dominated by the cathode shape. These results were related with the results of the welded penetration measurements. As a result, it was showed that the electron temperature above the anode and current density distribution on the anode decided the heat input density distribution on the anode and that the heat input density on the anode remarkably dominated the size of the weld penetration in argon GTA welding process. Furthermore, it was suggested that the cathode played the important role in the determination of the weld penetration in argon GTA welding process.

• Imaging Science in Dentistry
• /
• v.30 no.4
• /
• pp.259-263
• /
• 2000

Purpose: Upper cervical vertebrae are commonly imaged together with the jaw bones in panoramic radiography. There have been many studies investigating the possible role of mandible as an indicator of osteoporosis. But the result doesn't show unanimity. This study measured bone densities of mandible and second and third cervical vertebrae to find out any relationship between these two areas. These results may contribute in panorama being used as a screening method in detecting possible osteoporotic patient. Materials and Methods: Randomly selected 226 digitized panoramic images with cervical vertebrae shadows from 156 dental patients between 5 to 80 years of age were used. And the bone densities of second and third cervical vertebrae, apical areas of first and second mandibular molars and interdental areas were measured. The bone density measurements were restricted to the cancellous bone and the average and standard deviations and paired t-tests were done to each measurements. Results: All the measurements were statistically significantly related. The best relationship was found between the third cervical vertebrae and first and second mandibular apical areas. The average and standard deviations of the measured bone density ratios of these areas were 1.20±0.45 and 1.34±0.48 each. Conclusion: Patients whose panoramic bone density of the third cervical vertebrae are much below those of mandibular first or second molar apical areas may have osteoporosis.