• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.49-56
• /
• 1996

This study is to present the design methods in the Schrider House executed by the Dutch architect G. Th, Rieveld. The plastic principles which underlies the architecture design are examined through the analysis of the 'new structural joint system (Cartesian Coordinate System) ' and ' Color-Plasticity ' which characterized a series of his furniture design from 1918 to 1924. It indicates that Reitveld attempted to realize the simplicity, clarity and flexibility of spatial expression in his first independent architecture by the application of technical skills which have been developed in his early days.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.74-75
• /
• 2021

This study attempted to study the setting time and compressive strength according to the sugar type through XRD. Setting time was found to be delayed the most when mixing white sugar, and setting time was promoted when mixing Saccharin and Aspartame. It was found that when white sugar and Grosvener siraitia were mixed, the compressive strength was higher than that of Control. Aspartame the age passed, C₃S decreased and Ca(OH)₂ increased.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.553-560
• /
• 2021

In this study, cement clinker using a pure sample and clinker using 7% coal ash were sintered at a temperature of 1050~1500℃. Changes in the content of cement minerals and changes in microstructure by sintering temperature were reviewed. The application of coal ash as a raw material for cement clinker was applicable as a source of Al₂O₃ and SiO₂. At a sintering temperature of 1350℃ or higher, the cement clinker applied with coal ash showed the same level of mineral content as compared to the cement clinker applied with pure raw material. The microstructure also showed a similar state, confirming that coal ash can be used as a raw material for cement. In XRD-Reitveld analysis, a maximum amount of Belite was produced at 1250℃. The conversion from Belite to Alite was observed from 1350℃. From 1350℃, the interstitial phase and the mineral phase presumed to be alite were distinguished. It was clearly distinguished from 1400℃. As the sintering temperature increased, the shape and boundary of the crystal phase became clear, and the size of the crystal phase was also increased.