• 한국농공학회논문집
• /
• 제47권6호
• /
• pp.59-70
• /
• 2005

A series of resonant column test was performed to investigate the dynamic deformation characteristics of silty sand soils mixed with polypropylene fibrillated type fiber. Results show that optimum mixing ratios were $0.2\%$ for 19mm of cut fiber for shear modulus and $0.1\%$ for 60mm cut fiber fur damping ratio. As shear strain was increased, normalized values of shear modulus (G(Reinforced)/ G(Unreinforced)) of fiber reinforced soil were increased up to $10^{-3}\%\~10^{-1}\%$ ranges. However, normalized damping ratio (D(Reinforced/D(Unreinforced)) was diminished with an increase in strain beyond $10^{-3}\%\~10^{-1}\%$ for the damping capacity of soils mixed with fiber. Normalized shear modulus $(G/G_{max})$ obtained from the test was plotted in the chart suggested by Seed and Idriss. The shear modulus of silty sand was located between sand and gravel curves.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.51-58
• /
• 2008

The objective of this study was to investigate the mechanical characteristics of fiber-reinforced lightweight soil using waste fishing net or monofilament for recycling both dredged soils and bottom ash. Reinforced lightweight soil consists of dredged soil, cement, air foam, and bottom ash. Waste fishing net or monoiament was added the mixture in order to increase the shear strength of the lightweight soil. Test specimens were fabricated with various mixing conditions, including waste fishing net content and monofilament content. Several series of unconfined compression tests and direct shear tests were carried out. From the experimental results, it was found that the unconfined compressive strength, as well as the stress-strain behavior of reinforced lightweight soil was strongly influenced by mixing conditions. In this study, the maximum increase in shear strength was obtained with either a 0.5% content of monofilament or 0.25% waste fishing net. The unconfined compressive strength of reinforced lightweight soil with monofilament was greater than that of reinforced lightweight soil with waste fishing net.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.333-336
• /
• 2002

Traditional methods of earth reinforcement consist of introducing strips, fabrics, or grids into an earth mass. Recently, discrete fibers are simply added and mixed with the soil, much the same as cement, lime or other additives. The advantages of randomly distributed fibers is the maintenance of strength isotropy, low decrease in post-peak shear strength and high stability at failure. In this study, new composite reinforcement structures which consist of geotextile and randomly distributed discrete fibers were examined their engineering properties, such as shear strength of the composite reinforced soil. The increments of shear strength of composite reinforced soils were the sum of increments by fiber and woven geotextile respectively.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.146-152
• /
• 2000

To estimate the behavior of reinforced and unreinforced embankment constructed on a impermeable foundation ground, a laboratory model test was performed for two types of soils and water level increasing velocity of a flood period. The experiment models were constructed with slopes of water level is 1.25cm/min, 2.5cm/min each. From model test results, as the slope of reinforced and unreinforced embankment was the slower, the more seepage line rised. In the unreinforced embankment, the rising velocity of water level was the faster, the larger the embankment failure was. And the reinforced embankment with geotextile was the more safe than the unreinforced embankment for seepage force.

• 한국지반신소재학회논문집
• /
• 제9권4호
• /
• pp.67-73
• /
• 2010

보강토 옹벽에서 가장 중요한 것 중 하나는 양질의 뒷채움 재료를 구하는 것이다. 그러나 양질의 재료가 부족하여 부득히 부족한 토사대신 현장 유용토인 쇄석을 혼합하여 보강토 옹벽을 축조한 사례가 있었다. 따라서, 본 연구에서는 보강토옹벽의 뒷채움 재료로서 쇄석혼합토를 사용할 경우 혼합비에 따른 입도분포, 진단특성 및 인발특성에 대해서 각각 실험을 통하여 혼합비에 따른 특성변화들 검토하고자 하였다. 또한, 다양한 쇄석의 함유량에 대해 입도 선정기준에 적합한지 여부를 검토하였는데, 시험결과 입도19mm이하의 쇄석을 20%까지 혼합한 경우 뒷채움재료의 입도기준을 만족하였다. 전단강도정수 및 인발정수를 구하는 시험을 실시하였는데, 정수들은 쇄석함유량이 증가함에 따라서 증가하였다. 쇄석혼합토가 뒷채움재료로 사용될 경우 본 연구결과는 설계참고자료가 될 것으로 판단된다.

• 한국지반공학회지:지반
• /
• 제12권1호
• /
• pp.63-72
• /
• 1996

현행 시방서는 입상토만을 보강토 뒤채움재로 사용하도록 규정하고 있다. 그러나 보다 경제적인 보강토체를 구축하고자 한다면 현장유용토를 이용하는 것이 가장 이상적이다. 특히 국내에는 매우 넓은 범위에 화강토(화강암풍화토)가 분포되어 있어 현장 유용토의 대분분을 차지하기 때문에 이 재료의 적합성 여부가 보강토공법 채택의 주요한 요소가 되고 있다. 본 연구에서는 전국의 화강토를 대상으로 입도분포를 조사하여 현행 시방규정에 따른 적용의 한계성을 고찰하고 미세립 함유율과 함수비의 변화에 따른 전단강도의 변화가 화강토의 적용한계에 미치는 영향을 분석하였다.본 연구결과 보강토 뒤채움재로서의 화강토는 배수시설 또는 배수성 보강재를 사용하여 불포화상태(배수상태)를 유지하면 보다 많은 범위에서 이용이 가능함을 알게 되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.428-435
• /
• 2011

In general, thickness of the sublayers under track is designed based on concept of vertical soil reaction value or vertical stiffness. However, this design method cannot take consideration into soil-track interaction under repetitive load, traffic condition and velocity of the train. Furthermore, the reinforced roadbed soils experience complex behavior that cannot be explained by conventional stress-strain relation expressed as soil reaction value k. The reinforced roadbed soils also can produce cumulative permanent deformation under repetitive load caused by train. Therefore new design method for the sublayers under track must be developed that can consider both elastic modulus and permanent deformation. In this study, a new design concept, a rule-of-thumb, is proposed as the form of design monograph that is developed using elastic multi-layer and finite element programs by analyzing stress and deformation in the sublayers with changing the thickness and elastic modulus of the sublayers and also using data obtained from repetitive triaxial test. This new design concept can be applied to design of the reinforced roadbed before developing full version of design methodology that can consider MGT, axial load and the material properties of the layers. The new design monograph allows the user to design the thickness of the reinforced roadbed based on permanent deformation, elastic modulus and MGT.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.968-976
• /
• 2004

본 논문에서는 여러 가지 입도의 사질토에 폴리프로필렌(polypropylene) 재질의 단섬유(staple fiber)를 중량비 0.3%로 혼합한 섬유혼합도의 거동특성과 보강효과를 평가하였다. 곡류계수는 일정하게 유지하고 균등계수를 변화시켜 성형한 공사체에 공진주시험을 수행하였다. 섬유혼합토의 최대전단탄성계수는 비혼합토에 비해 최대 30%까지 증가하였고, 비선형 영역에서의 전단탄성계수 감소량도 억제되었다. 섬유혼합토의 정규화 전단탄성계수 감소곡선이 Seed와 Idriss의 대표곡선 상한값 쪽으로 이동해, 비혼합토보다 얇은 밴드로 분포하여 섬유의 혼합이 흙의 강성 증가에 효과적임을 증명되었다.

• Geomechanics and Engineering
• /
• 제9권6호
• /
• pp.757-774
• /
• 2015

Reinforcing soils with the geosynthetics have been shown to be an effective method for improving the uplift capacity of granular soils. The pull-out resistance of the reinforcing elements is one of the most notable factors in increasing the uplift capacity. In this paper, a new reinforcing element including the elements (anchors) attached to the ordinary geogrid for increasing the pull-out resistance of the reinforcement, is used. Thus, the reinforcement consists of the geogrid and anchors with the cylindrical plastic elements attached to it, namely grid-anchors. A three-dimensional numerical study, employing the commercial finite difference software FLAC-3D, was performed to investigate the uplift capacity of the pipelines buried in sand reinforced with this system. The models were used to investigate the effect of the pipe diameter, burial depth, soil density, number of the reinforcement layers, width of the reinforcement layer, and the stiffness of geogrid and anchors on the uplift resistance of the sandy soils. The outcomes reveal that, due to a developed longer failure surface, inclusion of grid-anchor system in a soil deposit outstandingly increases the uplift capacity. Compared to the multilayer reinforcement, the single layer reinforcement was more effective in enhancing the uplift capacity. Moreover, the efficiency of the reinforcement layer inclusion for uplift resistance in loose sand is higher than dense sand. Besides, the efficiency of reinforcement layer inclusion for uplift resistance in lower embedment ratios is higher. In addition, by increasing the pipe diameter, the efficiency of the reinforcement layer inclusion will be lower. Results demonstrate that, for the pipes with an outer diameter of 50 mm, the grid-anchor system of reinforcing can increase the uplift capacity 2.18 times greater than that for an ordinary geogrid and 3.20 times greater than that for non-reinforced sand.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.404-411
• /
• 2007

Reinforced roadbeds are valued from the point of view of maintenance as well as enhanced mechanical capacity. They support more train load and less transmit to the sub-layers than general roadbeds. Also, the lateral sloping surface of the reinforced roadbed and its low permeability, achieved by the controlled compaction, increase drainage capability and prevent the softening of sub-layers. In the study, a series of cross-hole tests was performed to observe the temporal changes in the stiffness of reinforced roadbeds, if any, due to the cyclic loading of trains and alternating rainy and frozen seasons at Pyeong-taek experimental site. The three types of reinforced roadbed materials are slag, crushed stones, and soils, and the thickness of all the reinforced roadbeds is 0.8m. The stiffness of the slag and soil reinforced roadbeds was not changed or slightly decreased. The stiffness of the crushed stone was somewhat increased and is inferred to being densified close to surface.