• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.609-614
• /
• 2001

This paper is to explain reasonable shear behavior that can apply usually to reinforced concrete beams on the basic concepts of existent analysis and experimental research information. This study is succession $paper^{2) 3) 4) 5)}$ of treatise announced in existing and main control variable of reinforced concrete beams with stirrups used internal force state factor($\alpha$). Shear failure of reinforced concrete beams with stirrups is Influenced greatly because of the actual geometrical shape(a/d) of the concrete and flexural reinforcement steel ratio, stirrup reinforcement ratio and concrete compression strength, size effect etc. Therefore, shear behavior of reinforced concrete beams with stirrups that flexural crack is happened can be explained easily through proper extent proposal of internal force state factor($\alpha$) that express internal force state flowing. Use existent variable truss model by analysis model to explain arch action. Also, wish to compose each failure factors and correlation with internal force state factor by function, and when diagonal cracks happens, internal force state factor($\alpha$) study whether shear stress and some effect are.

• 콘크리트학회지
• /
• 제10권3호
• /
• pp.185-196
• /
• 1998

이 논문은 직사각형 단면을 갖는 철근콘크리트 보에서 휨전단균열(Flexural-Shear Crack)이 원인을 규명하기 위해 모두 16개의 보를 실험한 결과를 기술한 것이다. 실험에 이용된 콘크리트보는 전단균열에 영향을 준다고 생각되는 몇 가지 요소를 인위적으로 소거 도는 고립되도록 특수하게 제작된 것이다. 이러한 특수보의 실험결과를 같은 재원을 갖는 보통의 정상보의 결과와 직접 비교하여서 그 차이를 분석함으로써 휨전단 균열의 발생원인을 규명하였다. 그 결과, 일반적인 콘크리트보에서의 휨전단균열 발생은 철근과 콘크리트의 경계면의 부착현상과 매우 밀접한 관련이 있는 것으로 나타났다. 또한 발생된 휨전단균열의 안정성은 주철근을 따라 발생되는 수평균열의 크기에 직접적인 영향을 받고 있는 것으로 나타났다. 본 연구에서 나타난 몇 가지 사실은 현재 사용중인 전단설계규준의 근본을 이루는 전단 위험단면개념과는 상반되는 것도 있었다. 실험에서 알아낸 사실을 근거로 전단파괴기구에 대한 새로운 가설을 제안하였다. 이 새 가설은 지금까지 잘 설명되지 않은 휨전단균열의 발생과 진행에 대한 원인 및 과정을 상당히 잘 설명해주고 있다고 생각된다.

• Computers and Concrete
• /
• 제30권1호
• /
• pp.43-74
• /
• 2022

Machine learning technique is recently opening new opportunities to identify the complex shear transfer mechanisms of reinforced concrete (RC) beam members. This study employed 1224 shear test specimens to train decision tree-based machine learning (ML) programs, by which strong correlations between shear capacity of RC beams and key input parameters were affirmed. In addition, shear contributions of concrete and shear reinforcement (the so-called V_c and V_s) were identified by establishing three independent ML models trained under different strategies with various combinations of datasets. Detailed parametric studies were then conducted by utilizing the well-trained ML models. It appeared that the presence of shear reinforcement can make the predicted shear contribution from concrete in RC beams larger than the pure shear contribution of concrete due to the intervention effect between shear reinforcement and concrete. On the other hand, the size effect also brought a significant impact on the shear contribution of concrete (V_c), whereas, the addition of shear reinforcements can effectively mitigate the size effect. It was also found that concrete tends to be the primary source of shear resistance when shear span-depth ratio a/d<1.0 while shear reinforcements become the primary source of shear resistance when a/d>2.0.

• 콘크리트학회지
• /
• 제8권3호
• /
• pp.177-185
• /
• 1996

실물크기와 1/10축소모델의 부재거동 상사성을 검토하기 위하여 네 가지 형태의 실험을 수행하였다. : (1) P-$\Delta$효과를 가지는 장주의 실험, (2) 구속 띠철근의 유무에 따른 단주의 실험, (3)스터럽이 없는 단순보(전단)실험, (4) T형보 휨실험. 실험의 결과에 기초하여 다음의 결론을 도출하였다. : (1)장주의 P-$\Delta$효과는 1/10축소모델에서 거의 정확하게 상사할 수 있다. (2)단주의 띠철근에 의한 구속 효과는 1/10축소모델에서 대체로 상사할 수 있다. (3)스터럽이 없는 단순보의 파괴모드는 실물크기의 경우 전단취성파괴를 나타내었으나 1/10축소모델은 인장철근의 항복과 더불어 상당한 크기의 연성을 나타낸 후 사인장균열 심화에 뒤이은 압축 콘크리트 파괴를 나타내었다. (4) T형보에서 실물크기와 1/10축소모델의 거동은 매우 근사하게 나타났다.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.539-546
• /
• 2018

Making a transverse opening in concrete beams in order to accommodate utility services through the member instead of below or above of that, sometimes may be necessary. It is obvious that inclusions of an opening in a beam decreases its flexural and shear strengths. Fabricated steel bars are usually used to increase the capacity of the opening section, but details of reinforcements around the opening are dense and complex resulting in laborious pouring and setup process. The goal of this study was to investigate the possibility of using steel fibers in concrete mixture instead of complex reinforcement detailing order to strengthen opening section. Nonlinear finite element method was employed to investigate the behavior of steel fiber reinforced concrete beams. The numerical models were validated by comparison with experimental measurements tested by other investigators and then used to study the influence of fiber length, fiber aspect ratio and fiber content on the shear performance of SFRC slender beams with opening. Finally, it was concluded that the predicted shear strength enhancement is considerably influenced by use of steel fibers in concrete mixture but the effect of fiber length and fiber aspect ratio wasn't significant.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.785-796
• /
• 2008

휨항복 이후 주기하중을 받는 철근콘크리트 부재에서는 길이방향의 인장변형이 발생된다. 이러한 길이방향 인장변형은 철근콘크리트 보의 강도 및 변형능력을 저하시킬 수 있다. 본 연구에서는 비선형 트러스 모델 해석을 통하여 철근콘크리트 보에 발생되는 길이방향 인장변형의 메커니즘을 분석하였다. 그 결과, 길이방향 인장변형은 소성힌지에서의 길이방향 철근에 발생되는 잔류 인장 소성변형으로 인하여 발생되고, 대각 콘크리트 스트럿의 전단력 전달 메커니즘이 길이방향 인장변형의 크기에 중요한 영향을 미치는 것으로 나타났다. 이러한 분석결과를 토대로 주기거동 동안 철근콘크리트 보에 누적되는 길이방향 인장변형을 평가할 수 있는 간단한 평가식을 제안하였다, 제안된 방법은 다양한 설계변수 및 재하이력을 갖는 보 실험체에 적용되었다.

• Smart Structures and Systems
• /
• 제3권1호
• /
• pp.51-68
• /
• 2007

High-strength concrete (HSC) is becoming increasingly attractive for various construction projects since it offers a multitude of benefits over normal-strength concrete (NSC). Unfortunately, current design provisions for shear capacity of RC slender beams are generally based on data developed for NSC members having a compressive strength of up to 50 MPa, with limited recommendations on the use of HSC. The failure of HSC beams is noticeably different than that of NSC beams since the transition zone between the cement paste and aggregates is much denser in HSC. Thus, unlike NSC beams in which micro-cracks propagate around aggregates, providing significant aggregate interlock, micro-cracks in HSC are trans-granular, resulting in relatively smoother fracture surfaces, thereby inhibiting aggregate interlock as a shear transfer mechanism and reducing the influence of compressive strength on the ultimate shear strength of HSC beams. In this study, a new approach based on genetic algorithms (GAs) was used to predict the shear capacity of both NSC and HSC slender beams without shear reinforcement. Shear capacity predictions of the GA model were compared to calculations of four other commonly used methods: the ACI method, CSA method, Eurocode-2, and Zsutty's equation. A parametric study was conducted to evaluate the ability of the GA model to capture the effect of basic shear design parameters on the behaviour of reinforced concrete (RC) beams under shear loading. The parameters investigated include compressivestrength, amount of longitudinal reinforcement, and beam's depth. It was found that the GA model provided more accurate evaluation of shear capacity compared to that of the other common methods and better captured the influence of the significant shear design parameters. Therefore, the GA model offers an attractive user-friendly alternative to conventional shear design methods.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.275-278
• /
• 2005

This paper presents a model for evaluating the contribution by arch action and frame action to shear resistance in shear-critical reinforced concrete beams without stirrup. The rotating angle softened truss model is employed to calculate the shear deformation of the web and the relative axial displacement of the compression and tension chord by the shear flow are also calculated. From this shear compatibility condition in a beam, the shear contribution by the arch action is numerically decoupled. The transverse strain obtained from the proposed model is selected for shear failure criterion. Using the failure criterion, shear strength of RC slender beams without stirrup is predicted.

• Computers and Concrete
• /
• 제3권4호
• /
• pp.213-233
• /
• 2006

Over the past years techniques for non-linear analysis have been enhanced significantly via improved solution procedures, extended finite element techniques and increased robustness of constitutive models. Nevertheless, problems remain, especially for real world structures of softening materials like concrete. The softening gives negative stiffness and risk of bifurcations due to multiple cracks that compete to survive. Incremental-iterative techniques have difficulties in selecting and handling the local peaks and snap-backs. In this contribution, an alternative method is proposed. The softening diagram of negative slope is replaced by a saw-tooth diagram of positive slopes. The incremental-iterative Newton method is replaced by a series of linear analyses using a special scaling technique with subsequent stiffness/strength reduction per critical element. It is shown that this event-by-event strategy is robust and reliable. First, the model is shown to be objective with respect to mesh refinement. Next, the example of a large-scale dog-bone specimen in direct tension is analyzed using an isotropic version of the saw-tooth model. The model is capable of automatically providing the snap-back response. Subsequently, the saw-tooth model is extended to include anisotropy for fixed crack directions to accommodate both tensile cracking and compression strut action for reinforced concrete. Three different reinforced concrete structures are analyzed, a tension-pull specimen, a slender beam and a slab. In all cases, the model naturally provides the local peaks and snap-backs associated with the subsequent development of primary cracks starting from the rebar. The secant saw-tooth stiffness is always positive and the analysis always 'converges'. Bifurcations are prevented due to the scaling technique.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.717-726
• /
• 2007

일반 강도의 철근을 고강도콘크리트 구조물에 사용하는 경우, 고강도콘크리트의 취성을 보완하고 그 성능을 십분 활용하기 위해서는 많은 양의 철근이 요구된다. 이는 곧 철근의 과밀 배근이나 자중의 증가와 같은 구조, 시공상의 문제를 야기할 수 있다. 따라서 고강도콘크리트 부재에 적합한 새로운 보강 재료 혹은 공법이 필요한 것이다. 이에 본 연구에서는 100 MPa의 고강도콘크리트를 사용하여 4개의 실물크기 보 시험체를 제작하고, 전단보강재를 달리하여 전단 거동에 대한 효과를 관찰하기 위해 실험을 수행하였다. 4개의 시험체는 각각 일반 철근, 고장력 철근, 헤디드 바, CFRP 바를 전단 스터럽으로 사용하였으며, 이 중 2개의 시험체에는 강섬유를 콘크리트에 혼입하여 그 효과를 관찰하였다. 고장력 철근의 사용은 전단철근에 의한 전단력과 부착력의 증가로 인해 전반적인 전단 성능의 향상을 가져왔다. 헤디드 바로 전단 보강된 부재의 경우에도 헤디드 바의 상당히 높은 정착강도로 인해서 우수한 전단 거동을 보였다. 하지만 본 실험에서 사용된 CFRP 바의 경우, 부착력이 매우 떨어져 전단보강재로서 적합하지 못한 것으로 나타났다. 강섬유 보강 콘크리트를 통해 부재의 연성 및 균열 제어 능력이 향상되었다.