• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.390-393
• /
• 2006

LB-DECK is used for both of permanent formwork and structural component with cast-in place concrete of concrete bridge decks. Current Korean design code recommends that concrete bridge deck with precast concrete panels have to be designed only using conventional flexural design method and does not allow the empirical design method which is based on punching shear strength of bridge deck. This paper present experimental test results of punching shear strength of concrete bridge decks with LB-DECKs. Six full-scaled concrete bridge decks, which are designed with the empirical design method, are fabricated with variation of girder spacings. Test results are presented in the paper and compared with the code predictions of ACI 318, CEB-FIP MC90. Based on the test results, it is proposed that LB-DECK is suitable to apply the empirical design method for concrete bridge decks.

• Computers and Concrete
• /
• 제6권6호
• /
• pp.473-490
• /
• 2009

This paper presents a new methodology to evaluate the load carrying capacity of deteriorated non-slender concrete bridge pier columns by construction of the full P-M interaction diagrams. The proposed method incorporates the actual material properties of deteriorated columns, and accounts for amount of corrosion and exposed corroded bar length, concrete loss, loss of concrete confinement and strength due to stirrup deterioration, bond failure, and type of stresses in the corroded reinforcement. The developed structural model and the damaged material models are integrated in a spreadsheet for evaluating the load carrying capacity for different deterioration stages and/or corrosion amounts. Available experimental and analytical data for the effects of corrosion on short columns subject to axial loads combined with moments (eccentricity induced) are used to verify the accuracy of proposed model. It was observed that, for the limited available experimental data, the proposed model is conservative and is capable of predicting the load carrying capacity of deteriorated reinforced concrete columns with reasonable accuracy. The proposed analytical method will improve the understanding of effects of deterioration on structural members, and allow engineers to qualitatively assess load carrying capacity of deteriorated reinforced concrete bridge pier columns.

• 콘크리트학회논문집
• /
• 제20권2호
• /
• pp.175-183
• /
• 2008

초유동 자기충전 콘크리트 (high flowing self-compacting concrete)는 현재 국내의 경우 건축 구조물에 한정적으로 적용되고 있으며, 토목 구조물의 적용은 찾아보기 어려운 실정이다. 그러나 북미 및 유럽의 경우 유동성 및 재료 분리 저항성이 우수한 초유동 자기충전 콘크리트를 프리캐스트 및 프리스트레스트를 도입한 과밀 배근된 교량 부재에 사용하고 있어 초유동 자기충전 콘크리트를 교량 및 토목구조물 등에 광범위 하게 확대 적용하여 그 활용성을 높여야 할 것으로 판단된다. 따라서 본 연구에서는 토목 구조물인 과밀 배근된 교량 구조물에 초유동 자기충전 콘크리트를 적용하기 위한 방법의 일환으로 고로슬래그 및 플라이애쉬를 2성분계 및 3성분계로 배합하였으며, 과밀 배근된 구조물에 적용할 수 있는 일본토목학회의 JSCE 1등급 규정에 따른 초유동 자기충전 콘크리트의 역학적 특성을 평가하였다. 시험결과 2성분계의 배합보다 3성분계의 배합이 우수한 역학적 성질을 나타내었으며, 과밀 배근된 프리캐스트 교량 부재에 사용 가능할 것으로 판단된다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.258-265
• /
• 2002

The recent earthquakes in worldwide have caused extensive damage to highway bridge structures. In particular, it has been demonstrated that concrete columns with inadequate lateral reinforcement contributed to the catastrophic collapse of many bridges. The poor detailing of the starter bars in these columns compounded the problem of seismic deficiency. Therefore, this study has been performed to verify the effect of lap spliced longitudinal steel and confinement steel type for the seismic behavior of reinforced concrete bridge piers. Eight concrete columns were constructed with existing scale as diameter, 1.2m and height, 4.8m. 4 confinement steel types were adopted for seismic performance evaluation. All specimens were rested under inelastic cyclic loading while simultaneously subjected to a constant axial load. The longitudinal steel lap-splice is highly effective in seismic performance deterioration of reinforced concrete bridge piers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.823-828
• /
• 2002

Lap splice in plastic hinge region of RC bridge piers is inevitable because of the constructional joint between footing and column. RC circular columns with lap-splice in plastic hinge region are widely used in Korean highway bridges. It is, however, believed that there we not many experimental research works for nonlinear behavior of these columns subjected to earthquake motions. This study has been peformed to verify the effect of lap splice and confinement steel ratio for the seismic behaviour of reinforced concrete bridge piers. Quasi-static test have been done to investigate the physical seismic performance of RC bridge piers, such as displacement ductility.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.22-27
• /
• 2004

This experimental investigation was conducted to examine the seismic performance of reinforced concrete bridge columns. The columns were subjected to a constant axial load and a cyclic horizontal load-inducing reversed bending moment. The variables studied in this research are the volumetric ratio of transverse reinforcement (ps = 0.96, 1.44 per cent) and axial load ratio (0.05, 0.1, 0.2 P/Po) and strength $(350kgf/cm^2,\;600kgf/cm^2)$. Test results show that bridge columns with 50 per cent higher amounts of transverse reinforcement than that required by seismic provisions of ACI 318-02 showed ductile behaviour. For bridge columns with axial load ratio(P/Po) less than 0.2, the ratio of Mmax over Mad, nominal moment capacity predicted by ACI 318-02 provisions, is consistently greater than 1 with approximately a 20 percent margin of safty.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.161-164
• /
• 2003

This experimental investigation was conducted to examine the seismic performance of reinforced concrete bridge columns. The columns were subjected to a constant axial load and a cyclic horizontal load-inducing reversed bending moment. The variables studied in this research are the volumetric ratio of transverse reinforcement ($P_s$ =0.96, 1.44 per cent) and axial load ratio (0.05, 0.1, 0.2 P/$P_o$). Test results show that bridge columns with 50 per cent higher amounts of transverse reinforcement than that required by seismic provisions of ACI 318-02 showed ductile behaviour. For bridge columns with axial load ratio(P/$P_o$) less than 0.2, the ratio of $M_{max}$ over $M_{aci}$, nominal moment capacity predicted by ACI 318-02 provisions, is consistently greater than 1 with approximately a 20 percent margin of safty.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.101-104
• /
• 2005

This study is to develop detailing guidelines based on ductility demand for reinforced concrete bridge columns in areas of low to moderate seismicity. The current seismic design criteria of the Korea Design Specifications for Highway Bridge (KDSHB 2005) adopted the seismic design concept and requirements of the AASHTO specifications. In order to obtain full ductile behavior under seismic loads, i.e. when applied seismic force is larger than design flexural strength of column section, a response modification factor (R=3 or 5) is used. In moderate seismicity regions, however, adopting the full ductility design concept sometimes results in construction problems due to reinforcement congestion. The objective of this paper is to suggest a new simplified seismic design of reinforced concrete bridge columns for moderate seismicity regions.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.96-99
• /
• 2008

When the design modification is occurred, at present, design process based on 2-D spend more time and effort than that based on 3-D to modify related structural details. To improve and develop these processes, therefore, the design possibility of civil structures based on virtual model of 3-D must be investigated. We designed reinforced concrete pier of 3-D model, containing parameters. The parameters was defined as structural details like area of the section, reinforcement specification for design modification and structural analysis. In this paper, we researched about the processes modeling of reinforced concrete bridge pier based on parameters, the extracting data from the virtual model of 3-D, and the reflection of data to virtual model throughout structural analysis.

• 전산구조공학
• /
• 제9권1호
• /
• pp.125-132
• /
• 1996

본 연구는 총기대비용최소화기법에 의한 실용적이고 현실적인 해석모형을 제시하는데에 그 목적이 있으며, 주요목적중에 하나로서 철근콘크리트교량의 현장시험과 조사결과에 의해 도출된 저항계수(RF)라는 평가항목에 의해 현재 철근콘크리트부재들에 안전한 평가와 내하력을 결정하는데에 있다. 총기대비용최소화기법은 가정된 모델들의 신뢰성해석에 사용되며, 가정한 신뢰성모델과 신뢰성해석방법은 철근콘크리트부재들의 안전한 평가와 시스템계수에 적용되어진다.