• Steel and Composite Structures
• /
• 제2권1호
• /
• pp.67-84
• /
• 2002

Traffic decks of steel or composite motorway bridges sometimes provide the opportunity of using the composite action between an existing steel deck and a reinforced concrete plate (RC plate) in the process of rehabilitation, i.e., to increase the load-carrying capacity of the deck for concentrated traffic loads. The steel decks may be orthotropic decks or also unstiffened steel plates, which during the rehabilitation are connected with the RC plate by shear studs, such developing an improved local load distribution by the joint behaviour of the two plate elements. Investigations carried out, both experimentally and numerically, were performed in order to quantitatively assess the combined static behaviour and to qualitatively verify the usability of the structure for dynamic loading. The paper reports on the testing, the numerical simulation as well as the comparison of the results. Conclusions drawn for practical design indicated that the static behaviour of these structures may be very efficient and can also be analysed numerically. Further, the results gave evidence of a highly robust behaviour under fatigue equivalent cyclic traffic loading.

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.72-80
• /
• 2004

Recently, the demand on the practical application of life-cycle cost effective design and rehabilitation of bridges is rapidly growing in civil engineering practice. However, in spite of impressive progress in the researches on the Life-Cycle Cost (LCC), the most researches have only focused on the theoretical point but did not fully incorporate the critical issues for the practical implementation. Thus, this paper is intended to suggest a systemic integrated approach to the practical application of various LCC methodologies for the design and rehabilitation of bridges, For that purpose, hierarchical definitions of LCC models are presented to categorize the approach of LCC assessment applicable for the practical implementation. And then, an integrated LCC system model is introduced with an emphasis on data uncertainty assessment and user-friendly knowledge-based database for its successful implementation. Finally, in order to demonstrate the LCC effectiveness for design and rehabilitation of real bridge structures, illustrative examples are discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.238-241
• /
• 2006

The needs for strengthening and rehabilitation of the concrete bridges are a growing concern in many countries and has been emphasized in various researches and papers. Traditional external post-tensioning method using either steel bars or tendons is commonly used as a strengthening method. However, the method has some disadvantages such as stress concentration at the anchorages. Multi-stepwise thermal prestressing method is a newly proposed method for strengthening and rehabilitation of concrete girder bridges. Founded on a simple concept of thermal expansion and contraction of steel, the method is a hybrid method of external post-tensioning and steel plate bonding, combining the merits of two methods. In this paper, basic concepts on strengthening and rehabilitation of concrete girder are presented and an illustrative experiment is introduced.

• 한국강구조학회 논문집
• /
• 제9권3호통권32호
• /
• pp.441-455
• /
• 1997

많은 나라에서 기 시공된 교량의 보수 보강에 대한 관심이 고조되고 있고 많은 보고서와 인쇄물에서 이에 대해 강조되고 있다. 국내의 1960년대와 1970년대 사이에 시공된 교량은 상대적으로 적은 차량크기, 속도, 중량으로 설계되어 현재의 교통조건에 부적절하다. 다소의 설계오류와 함께 이는 많은 교량의 여러 결함을 유발한다. 보수 보강의 한 방법으로 많은 잇점을 가진 external post-tension tendon을 사용하는 것이고 본 논문에서 external post-tension을 이용한 3경간 연속 합성교량의 보강방안에 대해 기술한다.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.108-115
• /
• 2003

교량은 강도설계법이나 허용응력 설계 법에 의해, 두 가지 단계에서 평가된다. 낮은 단계를 Inventory 높은 단계를 Operating이라 부른다. 교량을 효과적으로 유지관리 보수하기 위하여, 교량의 실제하중수용 능력을 평가하고 시스템 신뢰성으로부터 교량의 잔여 수명을 예측하는 것은 매우 시급하다. 생애함수가 시간 의존적 파괴확률을 예측하기 위하여 소개되고 설명된다. 이 논문에서 연구되는 교량은30년 전 농촌지역에 시공되었다. 이 교량에 대하여 하중시험과 보강이 이루어졌다. 시간 의존적 파괴확률이 보수보강 된 경우와 그렇지 않은 경우 대하여 예측되었다. 또 다른 연구로서 새로운 보수보강이 제시되고 이 보수보강에 대하여 내하력이 평가되었고 시간 의존적 파괴확률이 예측되었다. 유지관리 가격과 확장된 교량의 생애를 기본으로, 최적의 보수보강 기법이 제시되었다.

• Structural Engineering and Mechanics
• /
• 제85권1호
• /
• pp.81-88
• /
• 2023

This paper begins by analyzing cable vibrations due to external excitations and their effects on the overall dynamic behavior of cable-stayed bridges. It is concluded that if the natural frequency of a cable approaches any natural frequency of the bridge, the cable loses its rigidity and functionality. The results of this analysis explain the phenomenon that occurred on the Dubrovnik Bridge in Croatia during a storm and measures for its retrofit. A field test was conducted before the bridge was opened to traffic. It was concluded: "The Bridge excited unpleasant transverse superstructure vibration with the frequency of approximately 0.470 Hz. Hence, it seems possible that a pair of stays vibrating in phase may excite deck vibrations". Soon after this Bridge opened, a storm dumped heavy damp snow in the area, causing the six longest cable stay pairs of the main span to undergo large-amplitude vibrations, and the superstructure underwent considerable displacements in combined torsion-sway and bending modes. This necessitated rehabilitation measures for the Bridge including devices to suppress the large-amplitude vibrations of cables. The rehabilitation and monitoring of the Bridge are also presented here.

• Architectural research
• /
• 제7권2호
• /
• pp.81-89
• /
• 2005

Over the years, existing bridges have had various degrees of maintenance to extend the service life. As the existing bridges continue to deteriorate, however, each Department of Transportation (DOT) of the United States of America faces increasing demands on the limited funds available for bridge maintenance. Therefore, it is very important for State Department of Transportations to establish Maintenance, Repair, and Rehabilitation (MR&R) strategies for bridge structures such that funds get allocated for appropriate maintenance over the service life. This paper identifies the state-of-art and the state-of-practice of MR&R actions and the use of MR&R strategies in concrete bridge decks. In addition, a questionnaire survey was conducted to identify the type and timing for MR&R actions as well as existing MR&R strategies taken in concrete bridge deck by each DOT. This paper also presents the results of the survey.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1158-1164
• /
• 2007

Recently, the demand on the practical application of life-cycle cost effectiveness for design and rehabilitation of civil infrastructure is rapidly growing unprecedentedly in civil engineering practice. Accordingly, it is expected that the life-cycle cost in the 21st century will become a new paradigm for all engineering decision problems in practice. However, in spite of impressive progress in the researches on the LCC, so far, most researches in Koreahave only focused on roadway bridges, which are not applicable to railway bridges. Thus, this paper presents the formulation models and methods for uncertainty-based LCCA for railroad bridges consideringboth objective statistical data available in the agency database of railroad bridges management and subjective data obtained form interviews with experts of the railway agency, which are used to anew uncertainty-based expected maintenance/repair costs including lifetime indirect costs. For reliable assessment of the life-cycle maintenance/repair costs, statistical analysis considering maintenance history data and survey data including the subjective judgments of railway experts on maintenance/management of railroad bridges, are performed to categorize critical maintenance items and associated expected costs and uncertainty-based deterioration models are developed. Finally, the formulation for simulation-based LCC analysis of railway bridges with uncertainty-based deterioration models are applied to the design-decision problem, which is to select an optimal bridge type having minimum Life-Cycle cost among various railway bridges types such as steel plate girder bridge, and prestressed concrete girder bridge in the basic design phase.

• 한국강구조학회 논문집
• /
• 제15권4호통권65호
• /
• pp.341-358
• /
• 2003

본 논문에서는 강교의 실용적인 생애주기비용 (LCC) 최적설계를 위한 일반화된 정식화와 LCC 설계시스템 모델을 제안하였다. 강교 최적설계를 위한 LCC는 초기비용, 직접 복구 (rehabilitation) 비용과 인적 혹은 물적 손실비용의 직접비용, 도로이용자비용, 그리고 사회-경제 손실비용을 포함한 간접비용의 현재가치의 합으로 정식화하였다. 특히 본 논문에서는 교량이 속해 있는 도로의 네트워크를 고려한 도로이용자비용과 사회-경제 손실비용 산정을 위한 새로운 모델을 제안하였다. 본 연구에서 제안된 LCC 정식화 모델은 실제 강박스 거더교와 강상판형교의 LCC 최적설계 문제에 적용하였고, 다양한 경우에 대한 LCC의 효율성에 대해 비교 고찰하였다. LCC를 고려한 강교량의 최적설계는 설계시방서에 기초한 설계방법뿐만 아니라 초기비용 절감을 위한 최적설계 방법과 비교할 때 더욱 합리적이고, 경제적이며, 안전한 설계를 유도할 수 있으리라 판단된다.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.543-553
• /
• 2015

The condition of the vehicular bridge network in New York City, as represented by ratings obtained during biennial inspections is reviewed over a period of three decades. Concurrently, the bridges comprising the network are considered as networks of structural elements whose condition defines the overall bridge condition according to New York State assumptions. A knowledge-based matrix of assessments is used in order to determine each element's vulnerability and impact within the network of an individual structure and the network of City bridges. In both networks expansion deck joints emerge as the weak link. Typical joint failures are illustrated. Bridge management options for maintenance, preservation, rehabilitation and replacement are examined in the context of joint performance.