• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.9-16
• /
• 2018

In this paper, a kidnapping detection scheme in which human pose estimation is used to classify accurately between kidnapping cases and normal ones is proposed. To estimate human poses from input video, human's 10 joint information is extracted by OpenPose library. In addition to the features which are used in the previous study to represent the size change rates and the regularities of human activities, the human pose estimation features which are computed from the location of detected human's joints are used as the features to distinguish kidnapping situations from the normal accompanying ones. A frame-based kidnapping detection scheme is generated according to the selection of J48 decision tree model from the comparison of several representative classification models. When a video has more frames of kidnapping situation than the threshold ratio after two people meet in the video, the proposed scheme detects and notifies the occurrence of kidnapping event. To check the feasibility of the proposed scheme, the detection accuracy of our newly proposed scheme is compared with that of the previous scheme. According to the experiment results, the proposed scheme could detect kidnapping situations more 4.73% correctly than the previous scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.414-417
• /
• 2005

Single point diamond turning technique for optical crystals is studied in this paper. The main factors which are influential the machined surface quality are discovered and regularities of machining process are drawn. Optical crystals have found more and more important applications in the field of modern optics. Optical crystals are mostly brittle materials of poor machinability. The traditional machining method is polishing which has many shortcomings such as low production efficiency, poor ability to be automatically controlled and edge effect of the workpiece. The purpose of our research is to find the optimal machining conditions for ductile cutting of optical crystals and to apply the SPDT technique to the manufacturing of ultra precision optical components of brittle material(Ge). Many technical challenges are being tried for the large space infrared telescope, which is one of the major objectives of the National Strategic Technology Road Map (NSTRM).

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2003년도 제2차 연례학술대회 발표논문집
• /
• pp.268-274
• /
• 2003

Most currently known molecular structures were determined by X-ray crystallography or Nuclear Magnetic Resonance (NMR). These methods generate a large amount of structure data, even far small molecules, and consist mainly of three-dimensional atomic coordinates. These are useful for analyzing molecular structure, but structure elements at higher level are also needed for a complete understanding of structure, and especially for structure prediction. Computational approaches exist for identifying secondary structural elements in proteins from atomic coordinates. However, similar methods have not been developed for RNA due in part to the very small amount of structure data so far available, and extracting the structural elements of RNA requires substantial manual work. Since the number of three-dimensional RNA structures is increasing, a more systematic and automated method is needed. We have developed a set of algorithms for recognizing secondary and tertiary structural elements in RNA molecules and in the protein-RNA structures in protein data banks (PDB). The present work represents the first attempt at extracting RNA structure elements from atomic coordinates in structure databases. The regularities in the structure elements revealed by the algorithms should provide useful information for predicting the structure of RNA molecules bound to proteins.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.309-319
• /
• 2016

This paper presents a new recognition and classification method for power quality (PQ) disturbances on the basis of pattern linguistic values. This method solves the difficulty of recognizing disturbances rapidly and accurately by using fuzzy logic. This method uses classification disturbance patterns to define the linguistic values of fuzzy input variables and used the input variables of corresponding disturbance pattern to set membership functions. This method also sets the fuzzy rules by analyzing the distribution regularities of the input variable values. One characteristic of this method is that the linguistic values of fuzzy input variables and the setting of membership functions are not only related to the input variables but also to the character of classification disturbance and the classification results. Furthermore, the number of fuzzy rules is equal to the number of disturbance patterns. By using this method for disturbance classification, the membership function and design of fuzzy rules are directly related to the objective of classification, thus effectively reducing the complexity of the design process and yielding accurate classification results. The classification results of the simulation and measured data verify the feasibility and effectiveness of this method.

• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.57-62
• /
• 2003

Machining technique for optical crystals with single point diamond turning tool is reported in tills paper. The main factors influencing the machined surface quality are discovered and regularities of machining process are drawn. Optical crystals have found more and more important applications in the field of modern optics. Optical crystals are mostly brittle materials of poor machinability The traditional machining method is polishing which has many shortcomings such as low production efficiency, poor ability to be automatically controlled and edge effect of the workpiece. SPDT has been widely used in manufacturing optical reflectors of non-ferrous metals such as aluminum and copper which are easy to be machined for their proper ductility. But optical crystals being discussed here are characterized by their high brittleness which makes it difficult to obtain high quality optical surfaces on them. The purpose of our research is to find the optimum machining conditions for ductile cutting of optical crystals and apply the SPDT technique to the manufacturing of ultra precision optical components of brittle materials. As a result, the cutting force is steady, the cutting force range is 0.05-0.08N. The surface roughness is good when spindle is above 1400rpm, and feed rate is small. The influence of depth of cut is very small.

• Wind and Structures
• /
• 제26권6호
• /
• pp.355-367
• /
• 2018

This paper studies the aerodynamic stability of a tensioned, geometrically nonlinear orthotropic membrane structure with hyperbolic paraboloid in sag direction. Considering flow separation, the wind field around membrane structure is simulated as the superposition of a uniform flow and a continuous vortex layer. By the potential flow theory in fluid mechanics and the thin airfoil theory in aerodynamics, aerodynamic pressure acting on membrane surface can be determined. And based on the large amplitude theory of membrane and D'Alembert's principle, interaction governing equations of wind-structure are established. Then, under the circumstance of single-mode response, the Bubnov-Galerkin approximate method is applied to transform the complicated interaction governing equations into a system of second-order nonlinear differential equation with constant coefficients. Through judging the frequency characteristic of the system characteristic equation, the critical velocity of divergence instability is determined. Different parameter analysis shows that the orthotropy, geometrical nonlinearity and scantling of structure is significant for preventing destructive aerodynamic instability in membrane structures. Compared to the model without considering flow separation, it's basically consistent about the divergence instability regularities in the flow separation model.

• 식물분류학회지
• /
• 제37권4호
• /
• pp.363-386
• /
• 2007

Endemic element of the Russian Far East (RFE) flora includes 497 species of 150 genera and 46 families. The level of endemism in structure of regional natural flora reaches 11.1% as a whole, and in structure of its native fraction - 13.1%. As a result of chorologic and ecocenotic analysis of RFE flora endemic element it is revealed that it consists of 8 main geographical groups and 7 main floristic complexes. The largest number of endemic species is concentrated in Arctic - Alpine & Montane (140, 28.2%), Forest (107, 21.5%) and Maritime (88, 17.7%) floristic complexes as well as in Russian Far East - West-Pacific (136, 27.4%), Japan Sea (88, 17.7%) and North-East-Asian - Beringian (69, 13.9%) geographical groups. It's possible to distinguish three main areas with similar eco-geographical differentiation of endemics on RFE as follows: (1) North-East Asia sector of RFE which North-East-Asian - Beringian and Maritime Okhotia - Beringian geographical groups approximately correspond to, (2) Continental part of East Asia sector of RFE (West - Okhotian, Amur - Okhotian, Amur - Ussirian, Okhotsk Sea and Japan Sea groups) and (3) Oceanic part of East Asia sector (Russian Far East - West Pacific group). Taxonomical variety of RFE endemics on these territories makes up accordingly (1) - 99 species (19.9%), (2) - 259 (52.8%) and (3) - 136 (27.4%).

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.31-36
• /
• 2005

Machining technique for optical crystals with single point diamond turning tool is reported in this paper. The main factors influencing the machined surface quality are studied and regularities of machining process are drawn. Optical crystals have been known to more and more important applications in the field of modern optics. Ge is more brittle material of poor machinability. The traditional machining method is polishing which has many shortcomings such as low production efficiency, poor ability to be automatically controlled and edge effect of the workpiece. The purpose of our research is to find the optimum machining conditions for ductile cutting of Ge and apply the SPDTM technique to the manufacturing of ultra precision optical components of Ge. As a result, the surface roughness is the best when cutting speed is 180m/min, feed rate is 2mm/min, depth of cut is $0.5{\mu}m$ and nose radius of tool is 0.8mm.

• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.53-64
• /
• 2004

스트리밍 형태로 처리되는 멀티미디어 응용 데이터는 공간적 지역성은 큰 대신 시간적 지역성이 낮은 특징이 있다. 이 논문에서는 동적 선인출 기법을 작용하여 시간적 지역성은 낮으나 공간적 지역성이 있는 멀티미디어 응용 데이터에 내재된 메모리 참조의 규칙성을 활용하는 기법을 제안하였다. 특히 제안한 기법은 배열을 작은 블록으로 나누고 작은 블록별로 계산을 수행하는 응용 프로그램의 경우에 기존의 방법과 비교하여 선인출 에러를 크게 줄일 수 있는 특징이 있다. 여러 가지 미디어 벤치마크에 대한 실험 결과 제안한 기법이 기존의 선인출 기법에 비하여 선인출 에러 발생 회수가 크게 개선된 것을 확인할 수 있었다.

• 말소리와 음성과학
• /
• 제5권3호
• /
• pp.95-101
• /
• 2013

Aging is related to anatomical and physiological changes in respiratory and phonation organs. These changes influence articulation which leads to inaccurate speech and slow articulatory diadochokinesis(DDK). DDK indicates the range, rate, regularity, accuracy, and agility of articulation that reflect motor speech function. The purpose of this study is to investigate the rates and regularities of DDK in healthy Korean elderly through passive acoustic analysis (Praat). Thirty subjects between the ages of 65 and 94 participated in this study. Rate was observed for 5 seconds, while regularity was calculated based on the standard deviation on the following: 1) syllable duration of each task; 2) gap duration between syllables. Then, simple regression analysis was conducted in order to examine the effect of age on performance. The result showed that the slow rate was not a significant factor in terms of advancing age. Furthermore, regularity indicated a significant difference in the following: 1) /pʌ/, /kʌ/ and /pʌtʌkʌ/ in syllable duration; 2) /kʌ/ duration in the gap between syllables. In conclusion, articulatory coordination is reduced with the onset of aging. In particular, /kʌ/ would be a sensitive task for articulatory coordination.