• Title/Summary/Keyword: regional materials

Search Result 1,081, Processing Time 0.029 seconds

Distribution of Antifouling Agent Using Headspace Solid Phase Microextraction(HS-SPME) Method in Southwestern Coast of Korea (HS-SPME법을 이용한 한국 서남해 연안 해역에서의 방오제 분포 특성)

  • Han, Sang-Kuk
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.18 no.2
    • /
    • pp.85-93
    • /
    • 2012
  • We study on the distribution characteristics of antifouling agents such as Sea-nine 211, Irgarol 1051, Diuron using HS-SPME method in southwestern coast of Korea. Short half-life of Sea-nine 211 was distributed in very low concentrations and/or below detection limits in all of the sampling points, both water and sediments samples. Irgarol 1051 was detected to have the highest concentration respectively $6.98{\mu}g/L$, 28.50 ng/g-dry wt in the seawater and sediments, and regional distribution characteristics did not appeared. Strong bioaccumulation and long half-life of Diuron was distributed higher concentration than in all sampling point and was analyzed to have the highest concentration(3882.22 ng/g-dry wt) Mo7(Mokpo)'s sediment. Irgarol 1051 and Diuron distributed in the shipbuilding industry and ship marina are located just at the point to found in high concentrations. In addition, the distribution of the antifouling agent materials were lower in concentration than in inner bay to outter bay in sediments. Antifouling agent materials from these results were contaminated high potential from port and shipbuilding industry located in inner bay.

A study on the heat recovery Characteristics of double tube type heat recovery ventilation system by double pipe material (이중관 재질에 따른 이중관형 열회수 환기장치의 열회수 특성 연구)

  • Kim, Eun-Young;Cho, Jin-Pyo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.4
    • /
    • pp.21-26
    • /
    • 2017
  • In this study, performance tests were conducted to investigate the applicability of a double-tube heat recovery ventilation system. Paper, aluminum, polymer, were investigated as materials for the inner tube using the same exhaust-air volume. In all cases, the temperature exchange efficiency of the aluminum tube was the highest, while the paper tube showed similar results to those of the polymer tube. This probably resulted from the differences in thermal conductivity and thicknesses of the materials. The humidity exchange efficiency was the highest for the paper tubes in all cases, while the aluminum tubes and polymer tubes showed similar results. The total heat exchange efficiency, which includes the values of humidity exchange and temperature exchange, was highest in the case of the paper tube, and the aluminum tube and the polymer tube showed similar results. In the case of the paper tube, sensible heat and latent heat exchange occur at the same time, and the coefficient of energy of the aluminum tube and polymer tube are large values, when to be compared with only applicably sensible heat exchange coefficient of the aluminum tube and the polymer tube of total heat exchange efficiency value. The results of this study could be applied to the design of a ventilation system.

Utilization of Kiwifruit Branches as a Wreath Material (화환 재료로서 참다래나무 절지의 이용)

  • Lee, Kyung Suk;Im, Myung Hee;Park, Yong Seo;Lim, Dong Guen;Park, Yun Jum;Heo, Buk Gu
    • FLOWER RESEARCH JOURNAL
    • /
    • v.16 no.3
    • /
    • pp.179-185
    • /
    • 2008
  • This study was conducted to determine the characteristics and utilization of pruned kiwifruit branches as wreath materials. Amount of pruned branches produced from one 11~15 year-old kiwi plant cv. 'Hayward' can be used for one wreath with 76cm in diameter. Making a wreath with 76cm in diameter with the pruned kiwifruit branches required 75 branches with 31~40cm length. And the cost to make a wreath with 76cm in diameter for the Keaki and the paper bush were cheeper than those of winged spindle tree and Korean dogwood. Floral designers evaluated that the glossy, the delicacy and the unique form of cut branches, and their various hue were lower than that of the commonly-used cut branches, however, the beauty of curved line, the characteristics after drying, and the utilization and prospect of pruned kiwi branches were higher by 'over good' than that of the commonly-used branches. Consequently, it was assumed that the utilization of pruned kiwifruit branches can be contributed to the improvement of side income for a farm household, and the diversity wreath materials.

Effect of Ni or Cu content on Microstructure and Mechanical Properties of Solution Strengthened Ferritic Ductile Cast Iron (고용강화 페라이트계 구상흑연주철의 미세조직 및 기계적 성질에 미치는 Ni 및 Cu의 영향)

  • Bang, Hyeon-Sik;Kim, Sun-Joong;Song, Soo-Young;Kim, Min-Su
    • Journal of Korea Foundry Society
    • /
    • v.41 no.5
    • /
    • pp.411-418
    • /
    • 2021
  • In order to experimentally investigate the effect of Ni or Cu addition on microstructure and mechanical properties of high Si Solution Strengthened Ferritic Ductile cast Iron (SSF DI), a series of lab-scale sand casting experiment were conducted by changing initial concentration of Ni up to 3.0wt% or Cu up to 0.9wt% in the alloy. It was found that increase in Ni or Cu content in the alloy leads to increase in strength properties and hardness as well as decrease in ductility. The higher Ni or Cu content the SSF DI has, the higher fraction of pearlite was observed. At similar levels of Ni or Cu contents in the alloy, higher pearlite area fraction was observed in the Cu-containing SSF DI than that in the Ni-containing SSF DI. When the effect of the microstructure on the mechanical properties of Ni-containing SSF DI was considered, Ni-containing SSF DI was found to have excellent strength and hardness as well as good elongation when the pearlite fraction was controlled less than 10%. As the pearlite fraction in the Ni-containing SSF DI exceeds 10%, however, it shows drastic decrease in elongation. Meanwhile, gradual increase in strength and hardness, and decrease in elongation with respect to increase in pearlite fraction were observed in Cu-containing SSF DI. The different microstructure-mechanical property relationships between Ni-containing and Cu-containing SSF DI were due to the combined effect of the relatively weak pearlite stabilizing effect of Ni compared to that of Cu in high Si SSF DI, and matrix strengthening effect caused by the different amounts of those alloying elements required for similar pearlite fraction.

Evaluation of Regional Adaptability in Introduced Super Sweet Corn Hybrids and Heritability of Agronomic Traits (도입 초당옥수수 교잡종의 지역 적응성 및 농업 형질의 유전력 평가)

  • Lee, Shin-Young;Kang, Jong-won;Wang, Seung-hyun;Park, Tai-choon;Chung, Jong-Wook;So, Yoon-Sup
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.66 no.2
    • /
    • pp.130-137
    • /
    • 2021
  • This study evaluated newly introduced, commercial super sweet corn hybrids (Zea mays L.) for their potential as breeding materials. Agronomic traits were measured and variance components were obtained using a linear mixed model to estimate the heritability. The trials were carried out in 2018 at two locations (Haenam and Oksan in South Korea). All traits had low heritability, except for mid tasseling and silking days. These traits with low heritability mostly had low genetic variance component estimate. In case of ear height ratio, significant genotype by location appeared to be responsible for low genetic variance, which in turn led to low heritability. Low heritability estimates from the trials with commercial hybrids were perhaps because those hybrids were highly improved for commercial success. Hence, this does not necessarily point to them having poor potential as breeding materials. To overcome low heritability, significant genotype by environment interaction, and achieve high selection efficiency, intermating among hybrids is recommended to create new recombinants before inbred line development.

The metaverse christian educational platform in post-Corona era (포스트코로나 시대 메타버스 기독교교육 플랫폼)

  • Lee, Sun Young;Kim, Nan Ye
    • Journal of Christian Education in Korea
    • /
    • v.71
    • /
    • pp.341-370
    • /
    • 2022
  • As COVID-19 has been converted to an endemic with social distancing lifted, people are getting used to new cultures and lifestyles that are different from before. While the world is now adapting to rapidly changing trends, Christian education is facing a crisis without being able to respond to these changes. Therefore, a new Christian education method is now required. The purpose of this study is to suggest a new Christian education method that allows Christians to properly lead a new era as an alternative to Christian education that is experiencing such a crisis. The study also presents the metaverse Christian education platform, which is a detailed and practical method of Christian education, by incorporating the platform and metaverse that are under the spotlight in the post-Corona era into Christian education. Here, the christian educational platform refers to the system, space, and various materials that can make Christian education efficient and smooth. The metaverse Christian education platform consists of 4 stages according to the size of the platform to activate supply and demand within the platform. Stage 1 is a home education platform, Stage 2 is a community education platform, Stage 3 is a regional union education platform, and Stage 4 is an educational mission platform. The last Stage 4, the educational mission platform utilized the metaverse, which is drastically expanding in the present era, as a method of educational mission. It is meaningful that the educational mission has been embodied by providing small churches and the next generation in underdeveloped countries with educational contents, educational materials, online mentors, virtual communities, and real-time educational broadcasts within the educational platform, using virtual spaces in the metaverse.

A Study on the Leaching and Recovery of Lithium by Reaction between Ferric Chloride Etching Solution and Waste Lithium Iron Phosphate Cathode Powder (폐리튬인산철 양극재 분말과 염화철 에칭액과의 반응에 의한 리튬의 침출 및 회수에 대한 연구)

  • Hee-Seon Kim;Dae-Weon Kim;Byung-Man Chae;Sang-Woo Lee
    • Resources Recycling
    • /
    • v.32 no.3
    • /
    • pp.9-17
    • /
    • 2023
  • Efforts are currently underway to develop a method for efficiently recovering lithium from the cathode material of waste lithium iron phosphate batteries (LFP). The successful application of lithium battery recycling can address the regional ubiquity and price volatility of lithium resources, while also mitigating the environmental impact associated with both waste battery material and lithium production processes. The isomorphic substitution leaching process was used to recover lithium from spent lithium iron phosphate batteries. Lithium was leached by the isomorphic substitution of Fe2+ in LFP using a relatively inexpensive ferric chloride etching solution as a leaching agent. In the study, the leaching rate of lithium was compared using the ferric chloride etching solution at various multiples of the LFP molar ratio: 0.7, 1.0, 1.3, and 1.6 times. The highest lithium leaching rate was shown at about 98% when using 1.3 times the LFP molar ratio. Subsequently, to eliminate Fe, the leachate was treated with NaOH. The Fe-free solution was then used to synthesize lithium carbonate, and the harvested powder was characterized and validated. The surface shape and crystal phase were analyzed using SEM and XRD analysis, and impurities and purity were confirmed using ICP analysis.

한강하류지형면의 분류와 지형발달에 대한 연구 (양수리에서 능곡까지)

  • Park, No-Sik
    • Journal of the Speleological Society of Korea
    • /
    • no.68
    • /
    • pp.23-73
    • /
    • 2005
  • Purpose of study; The purpose of this study is specifically classified as two parts. The one is to attempt the chronological annals of Quaternary topographic surface through the study over the formation process of alluvial surfaces in our country, setting forth the alluvial surfaces lower-parts of Han River area, as the basic deposit, and comparing it to the marginal landform surfaces. The other is to attempt the classification of micro morphology based on the and condition premising the land use as a link for the regional development in the lower-parts of Han river area. Reasons why selected the Lower-parts of Han river area as study objects: 1. The change of river course in this area is very serve both in vertical and horizontal sides. With a situation it is very easy to know about the old geography related to the formation process of topography. 2. The component materials of gravel, sand, silt and clay are deposited in this area. Making it the available data, it is possible to consider about not oかy the formation process of topography but alsoon the development history to some extent. 3. The earthen vessel, a fossil shell fish, bone, cnarcoal and sea-weed are included in the alluvial deposition in this area. These can be also valuable data related to the chronological annals. 4. The bottom set conglometate beds is also included in the alluvial deposits. This can be also valuable data related to the research of geomorphological development. 5. Around of this area the medium landform surface, lower landform surface, pediment and basin, are existed, and these enable the comparison between the erosion surfaces and the alluvial surfaces. Approach : 1. Referring to the change of river beds, I have calculated the vertical and horizontal differences comparing the topographic map published in 1916 with that published in 1966 and through the field work 2. In classifying the landform, I have applied the method of micro morphological classification in accordance with the synthetic index based upon the land conditions, and furthermore used the classification method comparing the topographic map published in 1916 and in that of 1966. 3. I have accorded this classification with the classification by mapping through appliying the method of classification in the development history for the field work making the component materials as the available data. 4. I have used the component materials, which were picked up form the outcrop of 10 places and bored at 5 places, as the available data. 5. I have referred to Hydrological survey data of the ministry of Construction (since 1916) on the overflow of Han-river, and used geologic map of Seoul metropolitan area. Survey Data, and general map published in 1916 by the Japanese Army Survbey Dept., and map published in 1966 by the Construction Research Laboratory and ROK Army Survey Dept., respectively. Conclusion: 1. Classification of Morphology: I have added the historical consideration for development, making the component materials and fossil as the data, to the typical consideration in accordance with the map of summit level, reliefe and slope distribution. In connection with the erosion surface, I have divided into three classification such as high, medium and low-,level landform surfaces which were classified as high and low level landform surfaces in past. furthermore I have divided the low level landform surface two parts, namely upper-parts(200-300m) and bellow-parts(${\pm}100m$). Accordingly, we can recognize the three-parts of erosion surface including the medium level landform surface (500-600m) in this area. (see table 22). In condition with the alluvial surfaces I have classified as two landform surfaces (old and new) which was regarded as one face in past. Meamwhile, under the premise of land use, the synthetic, micro morphological classification based upon the land condition is as per the draw No. 19-1. This is the quite new method of classification which was at first attempted in this country. 2. I have learned that the change of river was most severe at seeing the river meandering rate from Dangjung-ni to Nanjido. As you seee the table and the vertical and horizontal change of river beds is justly proportionable to the river meandering rate. 3. It can be learned at seeing the analysis of component materials of alluvial deposits that the component from each other by areas, however, in the deposits relationship upper stream, and between upper parts and below parts I couldn't always find out the regular ones. 4. Having earthern vessel, shell bone, fossil charcoal and and seaweeds includen in the component materials such as gravel, clay, sand and silt in Dukso and Songpa deposits area. I have become to attempt the compilation of chronicle as yon see in the table 22. 5. In according to hearing of basemen excavation, the bottom set conglomerate beds of Dukso beds of Dukso-beds is 7m and Songpa-beds is 10m. In according to information of dredger it is approx. 20m in the down stream. 6. Making these two beds as the standard beds, I have compared it to other beds. 7 The coarse sand beds which is covering the clay-beds of Dukso-beds and Nanjidobeds is shown the existence of so-called erosion period which formed the gap among the alluvial deposits of stratum. The former has been proved by the sorting, bedding and roundness which was supplied by the main stream and later by the branch stream, respectively. 8. If the clay-beds of Dukeo-bed and Songpa-bed is called as being transgressive overlap, by the Eustatic movement after glacial age, the bottom set conglomerate beds shall be called as being regressive overlap at the holocene. This has the closest relationship with the basin formation movement of Seoul besides the Eustatic movement. 9. The silt-beds which is the main component of deposits of flood plain, is regarded as being deposited at the Holocene in the comb ceramic and plain pottery ages. This has the closest relationship with the change of river course and river beds.

A study on performance evaluation of fiber reinforced concrete using PET fiber reinforcement (PET 섬유 보강재를 사용한 섬유 보강 콘크리트의 성능 평가에 관한 연구)

  • Ri-On Oh;Yong-Sun Ryu;Chan-Gi Park;Sung-Ki Park
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.25 no.4
    • /
    • pp.261-283
    • /
    • 2023
  • This study aimed to review the performance stability of PET (Polyethylene terephthalate) fiber reinforcing materials among the synthetic fiber types for which the application of performance reinforcing materials to fiber-reinforced concrete is being reviewed by examining short-term and long-term performance changes. To this end, the residual performance was analyzed after exposing the PET fiber to an acid/alkali environment, and the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture by age were analyzed, and the surface of the PET fiber collected from the concrete specimen was examined using a scanning microscope (SEM). The changes in were analyzed. As a result of the acid/alkali environment exposure test of PET fiber, the strength retention rate was 83.4~96.4% in acidic environment and 42.4~97.9% in alkaline environment. It was confirmed that the strength retention rate of the fiber itself significantly decreased when exposed to high-temperature strong alkali conditions, and the strength retention rate increased in the finished yarn coated with epoxy. In the test results of the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture, no reduction in flexural strength was found, and the equivalent flexural strength result also did not show any degradation in performance as a fiber reinforcement. Even in the SEM analysis results, no surface damage or cross-sectional change of the PET reinforcing fibers was observed. These results mean that no damage or cross-section reduction of PET reinforcing fibers occurs in cement concrete environments even when fiber-reinforced concrete is exposed to high temperatures in the early stage or depending on age, and the strength of PET fibers decreases in cement concrete environments. The impact is judged to be of no concern. As the flexural strength and equivalent flexural strength according to age were also stably expressed, it could be seen that performance degradation due to hydrolysis, which is a concern due to the use of PET fiber reinforcing materials, did not occur, and it was confirmed that stable residual strength retention characteristics were exhibited.

Chinese Communist Party's Management of Records & Archives during the Chinese Revolution Period (혁명시기 중국공산당의 문서당안관리)

  • Lee, Won-Kyu
    • The Korean Journal of Archival Studies
    • /
    • no.22
    • /
    • pp.157-199
    • /
    • 2009
  • The organization for managing records and archives did not emerge together with the founding of the Chinese Communist Party. Such management became active with the establishment of the Department of Documents (文書科) and its affiliated offices overseeing reading and safekeeping of official papers, after the formation of the Central Secretariat(中央秘書處) in 1926. Improving the work of the Secretariat's organization became the focus of critical discussions in the early 1930s. The main criticism was that the Secretariat had failed to be cognizant of its political role and degenerated into a mere "functional organization." The solution to this was the "politicization of the Secretariat's work." Moreover, influenced by the "Rectification Movement" in the 1940s, the party emphasized the responsibility of the Resources Department (材料科) that extended beyond managing documents to collecting, organizing and providing various kinds of important information data. In the mean time, maintaining security with regard to composing documents continued to be emphasized through such methods as using different names for figures and organizations or employing special inks for document production. In addition, communications between the central political organs and regional offices were emphasized through regular reports on work activities and situations of the local areas. The General Secretary not only composed the drafts of the major official documents but also handled the reading and examination of all documents, and thus played a central role in record processing. The records, called archives after undergoing document processing, were placed in safekeeping. This function was handled by the "Document Safekeeping Office(文件保管處)" of the Central Secretariat's Department of Documents. Although the Document Safekeeping Office, also called the "Central Repository(中央文庫)", could no longer accept, beginning in the early 1930s, additional archive transfers, the Resources Department continued to strengthen throughout the 1940s its role of safekeeping and providing documents and publication materials. In particular, collections of materials for research and study were carried out, and with the recovery of regions which had been under the Japanese rule, massive amounts of archive and document materials were collected. After being stipulated by rules in 1931, the archive classification and cataloguing methods became actively systematized, especially in the 1940s. Basically, "subject" classification methods and fundamental cataloguing techniques were adopted. The principle of assuming "importance" and "confidentiality" as the criteria of management emerged from a relatively early period, but the concept or process of evaluation that differentiated preservation and discarding of documents was not clear. While implementing a system of secure management and restricted access for confidential information, the critical view on providing use of archive materials was very strong, as can be seen in the slogan, "the unification of preservation and use." Even during the revolutionary movement and wars, the Chinese Communist Party continued their efforts to strengthen management and preservation of records & archives. The results were not always desirable nor were there any reasons for such experiences to lead to stable development. The historical conditions in which the Chinese Communist Party found itself probably made it inevitable. The most pronounced characteristics of this process can be found in the fact that they not only pursued efficiency of records & archives management at the functional level but, while strengthening their self-awareness of the political significance impacting the Chinese Communist Party's revolution movement, they also paid attention to the value possessed by archive materials as actual evidence for revolutionary policy research and as historical evidence of the Chinese Communist Party.