• 고려인삼연구와산업
• /
• 제4권1호
• /
• pp.7-19
• /
• 2010

• 대한지리학회:학술대회논문집
• /
• 대한지리학회 2004년도 추계학술대회
• /
• pp.51-52
• /
• 2004

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.178-178
• /
• 2022

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.8-13
• /
• 2015

This study was carried out to evaluate mechanical properties of the jointed Al6061/HT590 alloys by friction stir welding (FSW). FSW was conducted under the conditions with tool rotating speed of 500 RPM and traveling speed of 300 mm/min., where Ar gas was introduced to prevent the materials from corrosion during the welding process. Electron back-scattering diffraction (EBSD) was used to characterize microstructures such as grain size, misorientation angle and crystal orientation. Evolution of intermetallic compounds in Al6061 during the process were examined in terms of morphology, size and aspect ratio at three distinct zones Al base material, heat affected zone and stir zone, where transmission electron microscope (TEM) was used. It was revealed that FSW gave rise to refinement of grains as well as growth of intermetallic compounds in Al6061. The morphological changes of intermetallic compounds exerted an influence on mechanical properties, resulting in occurrence of fracture in the part of the base material instead of the jointed parts (heat affected zone and stir zone). This study systematically evaluated the microstructural evolutions during the FSW for joining Al6061 with HT590 and their effect on mechanical properties.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.253-263
• /
• 1996

This study is an attempt to classify climatic regions of Korea based on the data of sunshine duration and to clarify the characteristics of sunshine for each divided regions. The data used in this study are the mean values of monthly and ten-daily sunshine duration, sunshine percentage, solar radiation and proud amount obtained from 63 weather stations of the Korea Meteorological Administration during the period of 1974~ 1993. The characteristics of annual change of sunshine percentage, annual duration of sunshine, percentage of sunshine, annual radiation, amount of cloud, days of sunshine percentage above 80% and-days of sunless are investigated by the mean values of -the stations belong to divided regions. The ward method of hierarchical cluster analysis is adopted to the analysis of data for the regional division. The results obtained in this study are summarized as follows. (1) The sunshine regions of Korea can be divided into six regions of the central west, central east, south west, souls east, Ullung-do and Cheju-do. These are strongly affected by the dirtribution of inclined slopes taking account of the topographic characteristics of Korea. (2) Annual distribution shows the sunshine duration of 1777~ 2287 hours, sunshine percentage of 40~53%, solar radiation of 3469~4637 MJ/$m^2$, cloud amount of 5.0~6.1, days of sunshine perrentage above 80% of 53~116days and sunless days of 46~71days. (3) The types of annual change of sunshine percentages is classified with four types of minimum in July and maximum in October, minimum in July and maximum in December, high in May and October and low in July and January, high in May and November and low in June and January. (4) The long-term trend of sunshine duration decrease in peninsula area but increase in island area and the Tong-term inclination of cloud amount is almost zero. The author believe this tendency is related to a pollutional turbidity than a cloud amount in inland area.

• 한국정보통신학회논문지
• /
• 제17권11호
• /
• pp.2745-2752
• /
• 2013

강우량을 측정하는데 있어서 전도형 및 중량형 강수량계가 전 세계적으로 오랫동안 사용되어 지고 있다. 그러나 종래의 강수량계는 관측오차와 자체 분해능의 한계로 인해 측정범위가 제한되는 문제가 있다. 본 논문에서 제안된 강수량계는 유량측정을 통해 강수량을 환산하는 원리를 최초로 적용하였으며, 개발된 모델을 국가공인교정기관(KOLAS)에서 표준교정시스템을 이용하여 실내실험을 실시하였다. 그 결과, 본 연구에서 개발된 강수량계는 실험조건에서 설정한 20~420 mm/H의 강우강도 구간에 걸쳐 ${\pm}2%$의 오차율을 나타냈고, 종래 대비 보다 정확하고 신뢰성 있는 측정이 가능함을 보였다.

• 한국축산식품학회지
• /
• 제35권1호
• /
• pp.121-129
• /
• 2015

${\beta}$-agonists are anabolic compounds that promote fat loss and muscle gain, and their administration to livestock may provide economic benefits by increasing growth rate and feed efficiency. For these reasons, ${\beta}$-agonists are also commonly added to livestock feed as growth promoters. This can introduce a significant risk of secondary human poisoning through intake of contaminated meat. A new method for the simultaneous determination of three ${\beta}$-agonists (clenbuterol, ractopamine, and zilpaterol) was developed in this study and applied to various meat samples. The limits of quantification, derived through a validation test following Codex guidelines, were $0.2{\mu}g/kg$ for clenbuterol and zilpaterol, and $0.4{\mu}g/kg$ for ractopamine. The average recoveries for clenbuterol, ractopamine, and zilpaterol ranged from 109.1% to 118.3%, 95.3% to 109.0%, and 94.1% to 120.0%, respectively. The recovery and coefficient of variation (CV) values fell within the acceptable range according to the Codex guidelines. This method reduced the analysis time without decreasing detection efficiency by modifying the pretreatment steps. This method could be utilized to manage the safety of imported meat products from countries where zilpaterol use is still permitted, thereby improving public health and preventing ${\beta}$-agonist poisoning due to secondary contamination.

• 한국수산과학회지
• /
• 제44권3호
• /
• pp.298-307
• /
• 2011

The species composition and distributions of subtidal marine algae on the east coast of Korea were studied. We examined all species found in permanent quadrats at three depths (3 m, 5 m and 10 m) at Sacheon between October 2008 and December 2009. Coverage and frequency data were collected monthly via underwater photography and analyzed using a modified photo quadrat method. Of the 82 species identified, 10 were chlorophytes, 21 were phaeophytes, 50 were rhodophytes, and one was a seagrass. The largest number of species (59) was found 10 m deep, while the fewest (39) species were present at 5 m. A total 17 species (two green, five brown, and 10 red algae) occurred at all three depths. The vertical distribution of the study site was characterized by the melobesioidean algae, Ulva pertusa, Sargassum confusum, Phyllospadix iwatensis, and Codium arabicum at 3 m deep, melobesioidean algae and U. pertusa at 5 m deep, and Corallina pilulifera, Prionitis cornea, Chondracanthus tenellus and melobesioidean algae at 10 m deep. Given that coralline algae such as melobesioidean algae and C. pilulifera play important roles in coastal ecosystems, thorough studies on the spatial and temporal variations of coralline algae and the dynamics of marine algal communities on the east coast of Korea are now required.

• 약학회지
• /
• 제55권2호
• /
• pp.131-137
• /
• 2011

The dissolution test method and an analytical procedure by HPLC were developed and validated for dobesilate calcium tablets and acepifylline tablets. These drugs were not yet characterized by the dissolution specifications in Korean Pharmaceutical Codex. So, with each reference and test drugs, we did the preliminary and standard experiments based on the Korean Pharmacopeia Guideline of dissolution testing for solid oral dosage forms. The dissolution test for dobesilate calcium tablets was carried out under sink conditions as following: dissolution medium water, paddle rotation speed 50 rpm and vessel volume 900 ml. More than 90% of its label amount was released within 30 min in this method. Also the dissolution test for acepifylline tablets was carried out under sink conditions as follows: dissolution medium water, paddle rotation speed 100 rpm and vessel volume 900 ml. More than 90% of its label amount was released within 45 min in this method. The dissolution samples were analyzed with a precise and accurate HPLC method. The developed dissolution test showed specificity, linearity, precision and accuracy within the acceptable range. The dissolution testing method described above was adequate for the purpose and may be proposed as a pharmacopeial standard to assess the performance of dobesilate calcium tablets and acepifylline tablets.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.15-21
• /
• 2014

FCAW(Flux Cored Arc Welding), SAW(Submerged Arc Welding), EGW(Electro Gas Welding), and three-pole SAW are applicable in manufacturing the offshore wind tower. In this paper, mechanical properties of these welded-joints for TMCP steels were evaluated in all above welding processes. The tensile strength of welded-joints for all the welding methods satisfied the standard guideline (KS D 3515). No cracking on weldment was found after the bending test. Changes of weldedments hardness with welding processes were observed. In a weld HAZ (heat-affected zone), a softened HAZ-zone was formed with high heat input welding processes (SAW and EGW). However, the welded-joint fractures were found in the base metal for all cases and small decrease in welded-joint strength was caused by a softened zone. The multi-pole SAW welds exhibited similar mechanical properties comparing to the one with one-pole SAW process.