• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.239-240
• /
• 2013

The quality of document images captured by digital camera might be degraded because of non-uniform illumination condition. The high illumination (glare distortion) affects on the contrast condition of the document images. This condition leads to the poor contrast condition of the text in document image. So, optical character recognition (OCR) system might hardly recognize text in the high illuminated area. The method to increase the contrast condition between text (foreground) and background in high illuminated area is proposed in this paper.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.46-51
• /
• 1998

The absorption coefficient of contrast media was measured in region of diagnostic radiology. Relative values of absorption coefficient was found the largest peak in the range of $60{\sim}70\;kVp$ for barium sulfate and 60 kVp for iodine. Increasing the thickness of contrast media and patient, the values of absorption coefficient was rising. In the Radiograph, desired $70{\sim}80\;kVp$ in the gastrointestinal digestion tract with barium sulfate and the vascular tract is before and behind 65 kVp of exposure.

• Journal of radiological science and technology
• /
• v.4 no.1
• /
• pp.37-44
• /
• 1981

It is a experimental report to investigate optimum exposure technics in angiocardiography. Because of x-ray absorption and rapid voluntary motion in the heart region, it bound that discrimination ability of the exposed film is being decreased in ACG To circumvent these disadvantage it must be necessary to use short time exposure technics and also high capacity equipment in ACG. But in the case of using the low tube voltage to improve contrast on the exposed film, it will be result in a many difficulties in interpretation of the image due to increased contrast in vertebral images. Therefore the ranges 80 kVp to 90 kVp of could be suitable for the purpose of good contrast and an excellent discrimination ability and under this circumstance the optimum grid ratio for ACG was 8:1 to 12:1.

• Applied Microscopy
• /
• v.48 no.4
• /
• pp.130-131
• /
• 2018

Electron channeling contrast imaging (ECCI) is one of the imaging techniques in scanning electron microscopy based on a variation in electron backscattering yield depending on the direction of the primary electron beam with respect to the crystal lattice. The ECCI provides not only observation of the distribution of individual grains and grain boundaries but also identification of the defects such as dislocations, twins, and stacking faults. The ECCI at the interface between recrystallized and deformed region of shot peening treated nickel clearly demonstrates the microstructural evolution during the recrystallization including original grain boundaries, and thus can provide better insight into the recrystallization behavior.

• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.467-473
• /
• 2004

Caption in video plays an important role that delivers video content. Existing caption region extraction methods are difficult to extract caption region from background because they are sensitive to noise. This paper proposes the method to extract caption region in sports video using multiple frame merge and MBR(Minimum Bounding Rectangles). As preprocessing, adaptive threshold can be extracted using contrast stretching and Othu Method. Caption frame interval is extracted by multiple frame merge and caption region is efficiently extracted by median filtering, morphological dilation, region labeling, candidate character region filtering, and MBR extraction.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This paper compares the difference between the village groves in the Jinan settlement region and the Hamyang settlment region in Honam and the Youngnam mountainous region. The results are as follows: Fifty-one village groves in the Jinan legion were found and 40 village groves were found in the Hamyang region. It was established that the village groves in the Jinan region of Honam province were conserved better than those of Hamyang region of Youngnam province. In the Jinan area, the village groves were principally found in the Jinan-eup and the Hamyang regions, primarily in Seosang-myun and Aneui-myun. So it was determined that the village groves were distributed inequitably in the two regions. In L / W ratio, the Jinan region is 3.6 and Hamyang region is 2.0 Jinan is 1.8 times greater than Hamyang. Therefore, it was concluded that Jinan is stronger than Hamyang in linear function of the village groves. Stone stooge for complementation function was found in 11 village groves in the Jinan region and 6 village groves in Hamyang. So the percentage of the remaining stone storage is 15-20 % of all village groves. Regarding grove makeup, the village gloves in Jinan region is deciduous forest principally. In contrast, the groves of Hamyang are principally coniferous forest. The dominant tree of the Jinan-gun region is Zelkova serrata, but in Hamyang it is Pinus densiflrora. By number, Hamyang region has two times the trees than Jinan region. In density of stand, the Hamyang region is 76.2% higher than Jinan region. In height and diameter of trees, the Jinan region is greater than the Hamyang region. It was identified that RSI of both region is 40%. So in density of trees, both region are sparse. This paper has a limit in ideiltiting the differences between Yolmg-nam ar\ulcorner Hnam village groves because comparative review only examined two regions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.597-605
• /
• 1999

In this paper, we propose a cardioangiography sequence image coding scheme which use a subtraction between initial image and current frame inserted contrast dye. Stable regions are obtained by the multithreshold and meaningful region is extracted by the images with stable region. The image with meaningful region is classified into contour and texture information. Contour information is coded by contour coding. And texture information is approximated by two-dimensional polynomial function and each coefficients is coded. Experimental results confirm that the sequence of cardioangiography are well reconstructed at the low bit rate (0.02∼0.04 bpp) and high compression ratio.

• Annual Conference of KIPS
• /
• 2013.05a
• /
• pp.215-218
• /
• 2013

In this paper, we proposed a method for enhancement of color images with sky regions. The input image is converted into HSV space and then sky and non-sky regions are separated. For sky region, saturation enhancement is performed for each pixel based on the enhancement factor calculated from the average saturation of its local neighborhood. On the other hand, for the non-sky region, the enhancement is applied only on the luminance value (V) component of the HSV color image, which is performed in two steps. The luminance enhancement, which is also called as dynamic range compression, is carried out using nonlinear transfer function. Again, each pixel is further enhanced for the adjustment of the image contrast depending upon the center pixel and its neighborhood pixel values. At last, the original H and V component image and enhanced S component image for the sky region, and original H and S component image and enhanced V component image for the non-sky region are converted back to RGB image.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.37-48
• /
• 2000

In this paper, we propose a new connected operator Using morphological grayscale reconstruction for region-based coding First, an effective method of reference-image creation lis proposed, which is based on the Size as well as the contrast. This improves the performance of simplification, because It preserves perceptually important components and removes unnecessary components The conventional connected operators are good for removing small regions, but have a serious drawback for low-contrast regions that are larger than the structuring element. That is, when the conventional connected operators are applied to tills region, the simplification becomes less effective or several meaningful regions are merged to one region to avoid this, the conventional geodesic dilation is modified to propose an adaptive operator to reduce the effect of inappropriate propagation, pixels reconstructed to the original values are excluded m the dilation operation Experimental results have shown that the proposed algorithm achieves better performance In terms of the reconstruction of flat zones. The Picture quality has also been improved by about 7dB, compared to the conventional methods.

• Korean Journal of Materials Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2015

This study suggested comprehensive structural characterization methods for the commercial blue light emitting diodes(LEDs). By using the Z-contrast intensity profile of Cs-corrected high-angle annular dark field scanning transmission electron microscope(HAADF-STEM) images from a commercial lateral GaN-based blue light emitting diode, we obtained important structural information on the epilayer structure of the LED, which would have been difficult to obtain by conventional analysis. This method was simple but very powerful to obtain structural and chemical information on epi-structures in a nanometer-scale resolution. One of the examples was that we could determine whether the barrier in the multi-quantum well(MQW) was GaN or InGaN. Plan-view TEM observations were performed from the commercial blue LED to characterize the threading dislocations(TDs) and the related V-pit defects. Each TD observed in the region with the total LED epilayer structure including the MQW showed V-pit defects for almost of TDs independent of the TD types: edge-, screw-, mixed TDs. The total TD density from the region with the total LED epilayer structure including the MQW was about $3.6{\times}10^8cm^{-2}$ with a relative ratio of Edge- : Screw- :Mixed-TD portion as 80%: 7%: 13%. However, in the mesa-etched region without the MQW total TD density was about $2.5{\times}10^8cm^{-2}$ with a relative ratio of Edge- : Screw- :Mixed-TD portion of 86%: 5%: 9 %. The higher TD density in the total LED epilayer structure implied new generation of TDs mostly from the MQW region.