• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.889-898
• /
• 2023

This study was conducted to estimate the abundance of narrow-ridged finless porpoises Neophocaena asiaeorientalis in the West Coast of Korea, where they predominantly inhabit. Sighting surveys were conducted in March and November 2021-2022 using vessels and aircraft during the same time periods and along the same survey transects. The aerial surveys yielded significantly more sightings than shipboard surveys, with 8.5-21.6 times the abundance and 6.3-16.9 times the number of observations. The detection rates were 0.000-0.047 and 0.0103 to 0.539 per km² for shipboard and aerial surveys, respectively. The densities were estimated to be 0.003-0.061 and 0.236-1.898 individuals per km² in the shipboard and aerial surveys, respectively. The shipboard survey conducted in March 2022 and the aerial survey conducted in November 2021 had the highest detection rates and abundance. In the coastal waters, shipboard sighting surveys face numerous challenges due to factors such as fishing gear, islands, and shallow water depths. In contrast, aerial surveys have the advantage of a shorter survey period and are less affected by weather, fisheries, coastal lines, and other variables. Thus, they are highly suitable for studying narrow-ridged finless porpoises in the coastal areas of the West Sea.

• Transactions of Materials Processing
• /
• v.33 no.5
• /
• pp.348-353
• /
• 2024

The S355NL steel has garnered attention as a structural material for applications in extremely challenging environments owing to its excellent mechanical properties. This study investigated the hot deformation behavior of S355NL steel through compression tests conducted in a temperature range of 900-1200℃ and a strain rate range of 10^-3-1 s^-1 to explore the optimal processing parameters. The flow behaviors consisted of an initial rapid increase and subsequent plateau with a marginal decrease in stress. This phenomenon was interpreted in terms of microstructural evolution, such as dislocation density and dynamic recrystallization. The efficiency of power dissipation and instability domains were derived using the dynamic material model based on the compression test dataset, providing a series of processing maps. In contrast to conventional processing maps plotted for a single strain value, this study has established ten maps at a strain interval of 0.1. This approach allowed for the consideration of continuously variable strain parameters, which is inherent to an actual metal-forming process. The efficiency of power dissipation was strongly governed by the high temperatures (≥ 1100℃). The strain rates barely affected the efficiency, but it primarily contributed to the instability domains. The application of high strain rates (≥ 10^-1s^-1) generated a region of negative instability due to the absence of dynamic recrystallization and the presence of cracks at grain boundaries.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.3
• /
• pp.157-164
• /
• 2024

Sorghum-Sudangrass hybrids (SSH) is a grass cereal hybrid crop with a high yield potential under different climatic conditions. The aim of this study was to evaluate the growth characteristics, dry matter yield and nutrient content of the SSH cultivars such as Dairy Mens Dream, Superdan and Supergreen from 2021 to 2023 in Jeju Island, Korea. Among the three cultivars, Superdan grew significantly taller with a larger stem diameter at both harvest times. In contrast, Dairy Mens Dream had least height and less stem diameter, but the dry matter yield was greater for Dairy Mens Dream than other cultivars. Furthermore, the crude protein content at the first cut was higher than 8.5% compared to the second cut (6.5 - 7.0%). The neutral detergent fiber (NDF) and acid detergent fiber (ADF) content was higher in the second harvest of all cultivars compared to the first harvest of SSH in 2021. The SSH cultivation in 2021 and 2023 had higher ADF and NDF content than in 2022, possibly due to the average precipitation and optimum temperature suitable for SSH production in 2021 and 2023. The selected three SSH cultivars showed significant growth characteristics, dry matter content, and nutritional value. The overall data suggested that all three SSH showed significant productivity and nutritional content in the Jeju region of sub-tropical climatic condition.

• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.107-114
• /
• 2015

The purpose is reducing radiation dose while maintaining of image quality in liver dynamic CT(LDCT) scan, by protocols generally used and the tube voltage set at a low level protocol compared to the radiation dose and image quality. The target is body mass index, 18.5~24 patients out of 40 patients who underwent the ACT(abdominal CT). Group A(tube voltage : 120kVp, SAFIRE strength 1) of 20 people among 40 people, to apply the general abdominal CT scan protocol, group B(tube voltage : 100kVp, apply SAFIRE strength 0~5) was 20 people, set a lower tube voltage. Image quality evaluation was setting a region of interest(ROI) in the liver parenchyma, aorta, superior mesenteric artery (SMA), celiac trunk, visceral fat of arterial phase. In the ROI were compared by measuring the noise, signal to noise ratio(SNR), contrast to noise ratio(CNR), CT number. In addition, qualitative assessments to evaluate two people in the rich professional experience in Radiology by 0-3 points. We compared the total radiation dose, dose length product(DLP) and effective dose, volume computed tomography dose index(CTDIvol). The higher SAFIRE in the tube voltage 100 kVp, noise is reduced, CT number was increased. Thus, SNR and CNR was increased higher the SAFIRE step. Compared with the tube voltage 120kVp, noise, SNR, CNR was most similar in SAFIRE strength 2 and 3. Qualitative assessment SAFIRE strength 2 is the most common SAFIRE strength 2 the most common qualitative assessment, if the tube voltage of 100kVp when the quality of the images better evaluated was SAFIRE strength 1. Dose was reduced from 21.69%, in 100kVp than 120kVp. In the case of a relatively high BMI is not LDCT scan, When it is shipped from the factory tube voltage is set higher, unnecessary radiation exposure when considering the reality that is concerned, when according to the results of this study, set a lower tube voltage and adjust the SAFIRE strength to 1 or 2, the radiation without compromising image quality amount also is thought to be able to be reduced.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.329-337
• /
• 1995

The effect of N-(4-chlorophenyl) maleimide(CPMI), plant growth regulators, and alkylating agents on gluathione(GSH) content and glutathione S-transferase(GST) activity was examined with 3-day-old etiolated sorghum(Sorghum bicolor [L.] Moench) seedlings. The GSH content and GST activity of untreated seedlings were higher in shoots than that in roots. Response of GST activity in coleoptile was significantly greater than in other tissues of sorghum seedling. In CPMI-treated seedlings, GSH content was not significantly different from that in untreated seedlings. CPM treatment resulted in 2.3-fold increase in GST activity measured with metolachlor as substrate in the coleoptile region. In contrast, change in GST activity measured with metolachlor as substrate in the coleoptile region. In contrast, change in GST activity measured with 1-chloro-2, 4-dinitrobenzene did not occur. The increase of GST activity was caused by induction of a GST isozyme, which is substrate-specific to metolachlor. Subsequently, two hypotheses related to metolachlor detoxification were evaluated on the basis of regulation of plant growth regulators and substrate induction of GST activity. In coleoptile, GST activity measured with metolachior was increased to 2.1-and 3.4-fold by both 2, 4-dichlorophenoxyacetic acid(2,4-D) and metolachlor treated at the germination stage of sorghum, respectively. Treatments of 2.4-D and metolachlor also induced isozymes exhibiting the activity toward metolachlor. One of the isozymes was co-eluted with that induced by CPMI. These results indicated that increase in GST activity by CPMI may be partially related to auxin regulation and substrate induction.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.321-327
• /
• 2014

Polymer dispersed liquid crystal lenses of the cell gap of $11{\mu}m$ and $30{\mu}m$ were made from a uniformly dispersed mixture of 40 wt% NOA65 prepolymer - 60 wt% E7 liquid crystal with the variations of the additional photoinitiator. The photoinitiator, benzophenone of 5.0 wt% was originally in the commercial prepolymer NOA65. In this works, the influence of the benzophenone amount intentionally added in the commercial NOA65 on the electrical properties of polymer dispersed liquid crystal lens for smart electronic glasses. The additional quantities of the photoinitiator were 1, 2, 4, 8 and 16 wt% of the weight of NOA65 - E7 mixture. All the electro-optical properties of the sample with added benzophenone such as the driving voltage, the slope of the linear region, the response time and contrast ratio were more improved than that of commercial NOA65 only. These improvements were due to the increase of the average size of E7 liquid crystal droplets in the samples with the increase of the added benzophenon amount. The liquid crystal droplet size was increased from $5.3{\mu}m$ to $12.2{\mu}m$ when the photoinitiator was added from 0 wt% to 8 wt%. At the same concentration range of the photoinitiator, the driving voltage was ranged from 11.1 V to 17.3 V. The slopes of the linear region were in the range of 10.35~13.96 %T/V, which were more enhanced than that of NOA65 without the additional benzophenone. In particular, though the deteriorations by cell gap of $11{\mu}m$ were so effective to offset the influence of the added benzophenone for both rising and falling response time, it is confirmed that there were still somewhat improvement by the additional benzophenone. Response time and contrast ratios of all the samples with excess benzophenone were slightly enhanced.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.34-37
• /
• 2012

Purpose: To verify the optimal scan time per bed for clinical application, we evaluated the quality of $^{18}F$-FDG images with varying scan times in a phantom and 20 patients with 38 lesions using a Philips (TOF) PET/CT scanner. Materials and Methods: The PET/CT images of a NEMA IEC body phantom and 20 patients (16 males, 4 females) were acquired for 5 different scan times of 20-100 sec per bed with intervals of 20 sec. The activity ratio of hot spheres (diameter of 17 [H1], 22 [H2] and 28 [H3] mm) to the background region in the IEC body phantom was 8-to-1. The contrast recovery coefficient (CRC) and standard uptake value (SUV) based on ROIs of hot spheres and background region were calculated. The noise in each background region was estimated as the ratio of SD of counts to the mean counts in the background region. On the patient image, the injected dose of $^{18}F$-FDG was $444{\pm}74$ MBq and the SUVs in the 38 hot lesions were measured. Results: The two scan time groups (LT-60 [<60 sec] and GT-60 [${\geq}60$ sec]) were compared. In the phantom study, the coefficient of deviations (CVs, %) of CRC and SUV in LT-60 (H1: 14.2 and 7.3, H2: 11.4 and 7.8, H3: 4.9 and 3.2) were higher than GT-60 (H1: 8.9 and 2.8, H1: 8.2 and 5.0, H3: 2.0 and 1.6). In the patient study, the mean CV of CRC and SUV in LT-60 (4.0) was higher than GT-60 (1.2). Conclusion: This study showed that noise increased as the scan time decreased. High noise for the scan time <60 sec per bed yielded high variation of SUV and CRC. Therefore, considering PET/CT image quality, the scan time per bed in the TOF PET/CT scanner should be at least ${\geq}60$ sec.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.280-287
• /
• 2011

This investigation was undertaken to survey toxigenic fungal contamination of various rice samples in 93 rice processing complexes (RPC) in Korea. Rice was grown in 2009 and the samples were collected in 2010. Seven types of rice samples such as unhusked, brown, blue-tinged, discolored, polished, half-crushed, and rice husks were obtained from each RPC. One-hundred and five grains of each sample were placed on PDA plates after surface disinfection. The incidence of fungal contaminants was 26.8%. Aspergillus spp. was the most dominant fungal contaminants and Fusarium spp. was the most frequently occurred in samples. The heaviest Fusarium contamination was found in unhusked grain, rice husks, and bare blue-tinged rice and followed by colored rice whereas broken rice was the least contaminated. Regional difference of fungal contamination was distinctive. Fusarium incidence in the rice samples from southern region of Korea including Jeolla and Gyeongsang Provinces was higher than those from central region including Chungcheong, Gyeonggi, and Gangwon Provinces. In contrast to Fusarium spp., Aspergillus spp. and Penicillium spp. were dominated in brown and polished rice samples and their incidences were more severe in central region than southern region. The major contaminants shown more than 1% of kernels infected were Aspergillus (5.0%), Fusarium (2.0%), Alternaria (1.4%), Dreschlera (1.3%), Penicillium spp. (1.3%), and Nigrospora spp. (1.0%). Collectotrichum, Pyricularia, Myrothecium, Epicoccum, Cladosporium, Moniliella, Gloeocercospora, Chaeto- mium, Curvularia, Phialopora, Acremonium, Gliomastix, Trichoderma, Rhizopus, Phomopsis, Paecilomyces, Genicularia, Geotrichum, Acremoniella, Rhizoctonia, Phoma, Oidiodendran, and Candida spp. were among the rest observed at low incidence. The major contaminants of rice samples were well-known as toxigenic fungal genera so toxin producibility of these fungal isolates is necessary to be examined in future. It is also needed to study Myrothecium spp. on species level as it was detected for the first time in rice.

• Korean Journal of Remote Sensing
• /
• v.14 no.2
• /
• pp.175-195
• /
• 1998

Automatic lineament extraction algorithms had been developed by various researches for geological purpose using remotely sensed data. However, most of them are designed for a certain topographic model, for instance rugged mountainous region or flat basin. Most of common topographic characteristic in Korea is a mountainous region along with alluvial plain, and consequently it is difficult to apply previous algorithms directly to this area. A new algorithm of automatic lineament extraction from remotely sensed images is developed in this study specifically for geological applications. An algorithm, named as DSTA(Dynamic Segment Tracing Algorithm), is developed to produce binary image composed of linear component and non-linear component. The proposed algorithm effectively reduces the look direction bias associated with sun's azimuth angle and the noise in the low contrast region by utilizing a dynamic sub window. This algorithm can successfully accomodate lineaments in the alluvial plain as well as mountainous region. Two additional algorithms for estimating the individual lineament vector, named as ALEHHT(Automatic Lineament Extraction by Hierarchical Hough Transform) and ALEGHT(Automatic Lineament Extraction by Generalized Hough Transform) which are merging operation steps through the Hierarchical Hough transform and Generalized Hough transform respectively, are also developed to generate geological lineaments. The merging operation proposed in this study is consisted of three parameters: the angle between two lines($\delta$$\beta$), the perpendicular distance($(d_ij)$), and the distance between midpoints of lines(dn). The test result of the developed algorithm using Landsat TM image demonstrates that lineaments in alluvial plain as well as in rugged mountain is extremely well extracted. Even the lineaments parallel to sun's azimuth angle are also well detected by this approach. Further study is, however, required to accommodate the effect of quantization interval(droh) parameter in ALEGHT for optimization.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.4
• /
• pp.327-342
• /
• 2021

The global coastal region is considered as a sink for atmospheric CO₂. Since most of the studies in the East Sea focused on the Ulleung Basin, the importance of coastal region for carbon cycle has been overlooked. In this study, we compared the biological pump and CO₂ absorption between the Ulleung Basin and coastal region by surface measurements of biological O₂ supersaturation (𝚫O₂/Ar) and partial pressure of CO₂ (fCO₂). Cold and less saline waters in the coastal regions were in contrast with a warm and saline water in the Ulleung Basin. The coastal waters near Samcheok and Pohang showed higher fluorescence, 𝚫O₂/Ar, and lower fCO₂ than those in the Ulleung Basin, indicating higher primary production and CO₂ absorption in the areas. The average net community production estimated by 𝚫O₂/Ar were 19 ± 6 and 60 ± 9 mmol O₂ m^-2d^-1 in the Samcheok and Pohang, respectively, 2-7 times higher than that of 8 ± 4 mmol O₂ m^-2d^-1 in the Ulleung Basin. Similarly, the average CO₂ flux between the seawater and atmosphere were -17.1 ± 8.9 and -25.8 ± 13.2 mmol C m^-2d^-1 in the Samcheok and Pohang, respectively, 4-5 times higher than that of -4.7 ± 2.5 mmol C m^-2d^-1 in the Ulleung Basin. In the Samcheok and Pohang, degrees of N₂ saturation were lower by 3% than that the ambient waters, suggesting the possibility of nitrogen fixation by primary producers.