• Journal of Korean Society of Rural Planning
• /
• v.21 no.1
• /
• pp.129-141
• /
• 2015

This study classifies the types of spatio-functional differentiation in Korean island areas and analyses typical characters and suggests the development directions by each type. Eup/Myeon-level island areas are classified as six types by the factor analysis and the cluster analysis. First type is the traditional rural center. This type puts emphasis on maintaining phase as the central space and has to maximize development potential of the whole of settlement zone. Second type is the specialized region in manufacturing industry and the qualitative mutual growth of regional industries is able to be suggested. Third type is the specialized region in the neighborhood service provision. This type needs to devise the plan for utilizing potential customers actively and developing into the region specialized in tourism industry. Fourth type is the specialized region in tourism-support service functions. This type has to promote differentiated policies for maintaining amenity infra or value of countryside capital and preservation and utilization of resources by regional features. Fifth type is the fishing industry-dominated region. This type has to promote sustainable fishery development through the policy reflecting regional features and condition. Finally, sixth type is the sluggish region dominated with the traditional agriculture and fishery. This type is needed to aim at developing into the new food production base having the advantage of clean environment by strengthening support in specialized agro-fishery products. The existing researches on spatio-functional differentiation were mostly discussed with respect to land development, but this study highlights the difference in deal with the island areas distinguished from the condition of industry.

• Archives of Pharmacal Research
• /
• v.28 no.8
• /
• pp.956-962
• /
• 2005

Leishmania virus (LRV)1-4 has been reported to produce a fusion of ORF2 and ORF3 via a programmed +1 frameshift in the region where ORF2 and ORF3 overlap (Lee et a/., 1996). However, the exact frameshift site has not been identified. In this study, we compared the frameshift efficiency of a 259bp (nt. 2565-2823), frameshift region of LRV1-4, and the 71 bp (nt. 2605-2678) sub-region where ORF2 and ORF3 overlap. We then predicted the frameshift site using a new computer program (Pseudoviewer), and finally identified the specific region associated with the mechanism of the LRV1-4's+1 frameshift by means of a mutational analysis based on the predicted structure of LRV1-4 RNA. The predicted structure was confirmed by biochemical analysis. In order to measure the frameshift efficiency, constructs that generate luciferase without a frameshift or with a+1 frameshift, were generated and in vitro transcription/translation analysis was performed. Measurements of the luciferase activity generated, showed that the frameshift efficiency was about $1\%$ for both the 259bp (LRV1-4 259FS) and 71 bp region (LRV1-4 71FS). Luciferase activity was strongly reduced in a mutant (LRV1-4 NH: nt. 2635-2670) with the entire hairpin deleted and in a mutant (LRV1-4 NUS: nt. 2644-2659) with the upper stem of the hairpin deleted. These results indicate that the frameshift site in LRV1-4's is in the 71 bp region where ORF2 and ORF3 overlap, and that nt. 2644-2659 (the upward hairpin stem) playa key role in generating the +1 frameshift.

• Korea Journal of Hospital Management
• /
• v.10 no.4
• /
• pp.23-50
• /
• 2005

The main objectives of this study are to compare the regional differences and to analyse the affecting factors of customer satisfaction. The subjects are 9 hospitals(5 Daegu region, 4 Seoul region) patient satisfaction index that were surveyed the 2004 Hospital Accreditation Program performed by KHIDI(Korea Health Industry Development Institute) and MOHW(Ministry of Health and Welfare). The sample used in this study consisted of 450 inpatients and 454 outpatients. The survey instrument is composed of physical environment items, physician factors, nursing staff factors, ancillary staff factors, administrative procedure items, and quality of hospital stay items. And overall satisfaction, intent to revisit, and intent to recommend as dependent variables are measured. Basically, the reliability and validity of survey items was evaluated. And the T-test was performed to compare regional differences of customer satisfaction. Finally to analyse the affecting factors on overall satisfaction, and customer loyalty(intent to revisit and intent to recommend), the multiple regression analysis was used. This study shows firstly, the Daegu region's patient satisfaction level of inpatients and outpatients is lower than Seoul region. Especially, nursing staff factors and quality of hospital stay items are very low on inpatient's satisfaction. Also all independent variables except the sufficiency of goods in hospital stand are very low on outpatient's satisfaction. Secondly, as a result of multiple regression analysis, ancillary staff factors(Beta=0.281) have a significant effect on overall satisfaction of inpatient cases in Daegu region. In regard to intent to revisit and intent to recommend, physical environment factors have a significant effect. Thirdly, in Seoul region, physical environment factors(Beta=0.430) have a significant effect on overall satisfaction of inpatient cases. In regard to intent to revisit and intent to recommend, administrative procedure items and nursing staff factors have a significant effect, respectively. In conclusion, these results indicate that hospitals in Daegu region make an effort to improve the customer satisfaction level, especially, of physical environment factors on inpatients and administrative procedure factors on outpatients

• Journal of the Korean association of regional geographers
• /
• v.21 no.2
• /
• pp.394-410
• /
• 2015

This study aims to classify climate zones for extreme climate indices over the Republic of Korea. First, frequencies and magitudes of extreme high temperature, spatial distributions for extreme low temperature, and extreme precipitation are analysed. Frequencies of summer days in inland region show more than coastal region. In frequencies of frost days, the characteristics of altitude and longitude are appeared. Heavy precipitation days show many frequencies in the southern coastal region and Jeju island, but little in Gyeongsangbuk-do region. The classification of climate zone for extreme climate indices by principal component analysis and cluster analysis is conducted for the first half, second half of study period, and climatology period for 1981-2010. Summer days are classified according to latitude. In case of frost days, the eastern and the southern coastal region and Jeju island are classified as same region. Heavy precipitation days are classified according to longitude in south region of Gyeonggi-do and Gangwon-do. This study will help to prepare adaptation and mitigation system for climate change in wide range of fields.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.377-386
• /
• 2005

This study was carried out to analyse the landslide characteristics by ground investigation, borehole image processing system, field seismic test, laboratory test and ground stability analysis at the landsliding area occurred in Maeri, Sangdong-myeon, Gimhaesi, Gyeongsangnam-do. Region I needs to install data logger system to monitor a land displacement during the heavy rainfall events because the region can be liable to occur the land slide by land creeping. It is needed to restore rapidly, if the land displacement occurs in Region I. Region II needs to monitor and repair because of the possibility of slope failure by long-term soil loss. Region III needs constructions to remove ground runoff and ground water to be infiltrated from talus. Region IV where is a stable region, needs to be protected from land cutting or other man-made damage.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.109-115
• /
• 2002

In this study high power Nd:YAG laser welding of structural steel was investigated. For the test steel blocks of $50{\times}50{\times}200mm$ were cut and machined, and bead-on-plate weld was made on the machined surface. Argon, nitrogen, helium, dry air or mixed gases were used to find the effect of shielding conditions on the bead formation. Results demonstrated that there were Fe I rich region and Fe II rich region in the laser induced plasma column based on the spectral analysis with S-2000 field spectrometer The Fe I region was located at the root of the column near keyhole opening. On the other hand, Fe II region was found at the middle of the plasma column. In the Nd:YAG laser welding, Fe I region emitted continuum which had peak value at wave length of around 710nm, and Fe II region had the peak at 580nm. In the welding of steel by $CO_2$ laser, however, no continuum was observed. There showed two groups of strong spikes in the $CO_2$ laser welding; the first group was displayed at the wave band of 450-560nm. This spike group emitted stronger intensity of light and sharper peaks than those group at 680-800nm.

• Korean Journal of Metals and Materials
• /
• v.50 no.9
• /
• pp.629-636
• /
• 2012

Volume shrinkage behavior accompanying the cure of resin formulations might be a critical factor when assembly processes using polymer materials are considered. In this study, cure shrinkage behavior with respect to resin formulation type and heating method was measured on sandwich structure samples by a thermomechanical analyzer (TMA). Quartz, used as a cover material for the sandwich structure, indicated the coefficient of thermal expansion close to $0ppm/^{\circ}C$. When a dynamic heating mode was conducted, a squeeze-out region and a cross-linking region for each resin formulation could be separated clearly with overlapping differential scanning calorimeter results on the TMA results. In addition, a cure shrinkage dominant region and a thermal expansion dominant region in the cross-linking region were distinguished. Consequently, the degree of cure at the initiation of the thermal expansion dominant region was successfully measured. Measurement of all resin formulations indicated the thermal expansion behavior exceeded cure shrinkage before full cure.

• Steel and Composite Structures
• /
• v.33 no.4
• /
• pp.537-550
• /
• 2019

Korea and Japan have done a lot of research on composite girders with corrugated steel webs and built many bridges with corrugated steel webs due to the significant advantages of this type of bridges. Considering the demanding on the calculation method of such types of bridges and lack of relevant reinforcement design method, this paper proposes the spatial grid analysis theory and tensile stress region method. First, the accuracy and applicability of spatial grid model in analyzing composite girders with corrugated steel webs was validated by the comparison with models using shell and solid elements. Then, in a real engineering practice, the reinforcement designs from tensile stress region method based on spatial grid model, design empirical method and specification method are compared. The results show that the tensile stress region reinforcement design method can realize the inplane and out-of-plane reinforcement design in the top and bottom slabs in bridges with corrugated steel webs. The economy and precision of reinforcement design using the tensile stress region method is emphasized. Therefore, the tensile stress region reinforcement design method based on the spatial grid model can provide a new direction for the refined design of composite box girder with corrugated steel webs.

• New & Renewable Energy
• /
• v.9 no.3
• /
• pp.5-13
• /
• 2013

In the previous research, dynamic results have been analyzed in the time and frequency regions. Time and frequency region can be transformed by the Fourier transform. This transform is very useful about analyzing system behaviors. However, because of coupling, it cannot give clear results in the real system including lots of defects. In this paper, we introduced the analysis based on quefrency region to represent physical means clearly from complicated results. We simulated the drive train system which has defects, and compared between frequency and quefrency region to show its excellence. To do this process, We established mathematical model. The equation of motion was derived by the Lagrange equation and constraint equations. The constraint equation included relationships about gear mesh, flexibility of shaft. About numerical analysis, the Newmark beta method was used to get results. And FFT (Fast Fourier Transform) which converts results from time domain to frequency, qufrequency was used.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.99-104
• /
• 2009

This article describes the analysis of stable grasping for multi-fingered robot. An analysis method of stable grasping, which is based on the three-dimensional acceleration convex polytope, is proposed. This method is derived from combining dynamic equations governing object motion and robot motion, force relationship and acceleration relationship between robot fingers and object's gravity center through contact condition, and constraint equations for satisfying no-slip conditions at every contact points. After mapping no-slip condition to torque space, we derived intersected region of given torque bounds and the mapped region in torque space so that the intersected region in torque space guarantees no excessive torque as well as no-slip at the contact points. The intersected region in torque space is mapped to an acceleration convex polytope corresponding to the maximum acceleration boundaries which can be exerted by the robot fingers under the given individual bounds of each joints torque and without causing slip at the contacts. As will be shown through the analysis and examples, the stable grasping depends on the joint driving torque limits, the posture and the mass of robot fingers, the configuration and the mass of an object, the grasp position, the friction coefficients between the object surface and finger end-effectors.