• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.3
• /
• pp.7-15
• /
• 2006

Aerodynamic analysis of an airfoil in the transonic region was automated in order to enable parametric study by using the journal file of the commercial analysis code FLUENT, pre/post process Gambit and computational mathematics code MATLAB. The automated capability was illustrated via NACA 0012 and RAE 2822 airfoils. This analysis was carried out at Mach numbers ranged from 0.70 to 0.80, angles of attack; 1$^{\circ}$, 2$^{\circ}$ and 4$^{\circ}$, Reynolds numbers; 4.0${\times}$106, 6.5${\times}$106. The analysis results of a pressure coefficient were verified by comparing with the experimental data which were measured in terms of chord length because the pressure coefficient of an airfoil surface is a good estimator of flow characteristics. The results of two airfoils show that this analysis code is useful enough to be used in the design optimization of airfoil.

• Journal of Periodontal and Implant Science
• /
• v.37 no.1
• /
• pp.137-150
• /
• 2007

CADIA(Computer-assisted densitometric image analysis) method is used to analyze bone density changes around the implants. The usefullness and reproducibility of the method was assessed. We tried to find out if there is any possibility to quantitiate and qualitify peri-implant bone density change as time passes. And we concluded that this newly developed linear analysis is efficient for analyzing peri-implant bone density change non-Invasively. In this study, 2152 machined $Br{\aa}nemark$ fixtures installed from 1994 to 2002 in the department of Periodontics, Dental hospital of College of Dentistry, Yonsei University were included. Of these fixtures 22 radiographically analyzable failed fixtures were used as experimental group, and 22 successful implants placed in the same patient were used as control group. 1. 57 out of 1635 machined $Br{\aa}nemark$ standard and Mk II implants system failed, the survival rate was 96.5%. And 11 out of 517 machined $Br{\aa}nemark$ Mk III and Mk IV implants system failed, the survival rate was 97.9%. Total survival rate was 96.8%. 2. 22 failed implants were used for the analysis, 10 of which failed before prosthetic treatment due to infection and overheating. 12 failed due to overload after prosthetic treatment, 63.6% of which failed during the early phase of functional loading, i, e. before 1 year of loading. 3. Bone density change values around coronal region of the failed implants were $-6.54{\pm}6.35$, middle region were $-3.53{\pm}5.78$, apical region were $-0.75{\pm}10.33$, resulting in average of $-3.71{\pm}8.03$. 4. Bone density change values around coronal region of the successful implants were $4.25{\pm}4.66$, middle region were $6.33{\pm}5.02$, apical region were $9.89{\pm}4.67$, resulting in average of $6.27{\pm}5.29$. 5. There was a statistically significant difference between two groups (p<0.01). In conclusion, the linear analysis method using computer-assisted densitometric image analysis could be a useful method for the analysis of implants, and could be used for future implant researchs.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.907-910
• /
• 1998

In this paper, we present a comparative performance analysis of several blocking artifact reduction algorithms. For the performance analysis, we propose a block boundary region classification algorithm which classifies each horizontal and vertical block boundary into four regions using brightness change near the block boundary. The PSNR performance of each algorithm is compared. The MSE according to each block boundary region is also compared. Experimental results show that the wavelet transform based blocking artifact reduction algorithms have better performance over the other methods.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.80-84
• /
• 2000

A mesh superposition technique is presented for an efficient analysis of structural behavior. Refined child mesh is superimposed over parent elements for the region of interest. It is a kind of adaptive mesh refinement, which allows locally refined mesh without introducing transition region or multipoint constraints. Proper boundary condition is necessary to avoid redundant rigid body motion and kinematic compatibility between neighbor elements. Delamination buckling analysis is conducted to demonstrate accuracy and efficiency of the present method.

• Journal of the Korean association of regional geographers
• /
• v.21 no.1
• /
• pp.39-61
• /
• 2015

This paper reviews literature on urban connectivity, and reconsiders the concept of polycentric urban region and its analysis methods, and then, applying them, explores the inter-city flight connectivity and polycentricity in the Yeongnam Region. As results of analysis, it has been identified that the entropy index shows a relatively dispersing pattern of the urban network of the region, and that the dominance index reveals a more polycentric (that is, less hierarchic) character of the region than that of the Capital Region, while some differences are found among individual cities in the symmetry of connectivity and the dominance and/or dependence index. Even though flows of products in textile, basic metals, and automobile industries in sub-divisions of manufacture appear a pattern of concentring into the first central city, the urban network of the Yeongnam Region in general can be characterized as a polycentrism, and policy for polycentric regional development would be suggested.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.748-757
• /
• 1999

본 논문에서는 차량 영역의 추출을 이용한 효율적인 교통 혼잡도 측정 시스템을 설계하고 구현한다. 차량 영역 정보의 추출은 첫째 영역 분할, 둘째 작은 영역의 제거와 영역의 직사각형화, 셋째 영역의 병합 및 삭제의 단계로 나눌 수 있다. 영역 분할 단계에서는 획득한 도로 영상을 영역 기반 영역 분할에 의해 영역으로 분할한다. 그 다음 영역 분할 후의 영역 정보 중 차량 영역을 추출하는데 영향을 미치지 않는 작은 영역들을 제거하고, 남은 영역들을 직사각형화한다. 마지막으로 차선 별로 남은 영역들을 병합, 삭제함으로써 각 차선마다 차량 영역 정보를 추출할 수 있다. 이러한 방법은 배경 영상과 같은 부가적인 정보를 사용하지 않고 도로 자체 영상만으로 교통 혼잡도를 측정할 수 있으며, 그림자의 영향이 없을 경우 적용할 수 있는 기법이다.Abstract In this paper, we designed and implemented an efficient road congestion analysis system using regional information. To extract vehicle regions from a road image, the system process the image in five steps: segmentation, small region elimination, region rectangularization, region merging and region deletion. First, we segment road image by a threshold value. Then, we eliminate useless small regions to extract vehicle region, and perform region rectangularization. Finally, we extract vehicle region of each lane of the road by region merging and deletion. This method has the advantage of measuring road congestion without additional information such as background images. But this method must be applied to road images without shadow.

• Journal of computational fluids engineering
• /
• v.21 no.4
• /
• pp.33-39
• /
• 2016

Generally, thermal analysis of spent fuel storage cask has been conducted using the porous media and effective thermal conductivity model to simplify the structural complexity of spent fuel assemblies. As the fuel assembly is composed of two regions; active fuel region corresponding to UO2 pellets and unactive fuel region corresponding to the top and bottom nozzle, the heat transfer performance can be influenced depending on porous media application at these regions. In this study, numerical analysis on concrete storage cask of spent fuel was performed to investigate heat transfer effects for two cases; one was porous media application only to active fuel region(case 1) and the other one was porous media to whole length of fuel assembly(case 2). Using computational fluid dynamics code, the three dimensional, 1/4 symmetry model was constructed. For two cases, maximum temperatures for each component were evaluated below the allowable limits. For the case 1, maximum temperatures for fuel cladding, neutron absorber and baskets inside the canister were slightly higher than those for the case 2. In particular, even though the helium flows with low velocity due to buoyant forces occurred at the top and bottom of unactive fuel region, treating only active fuel region as the porous media was ineffective in respect of the heat removal performance of concrete storage cask, implying a conservative result.

• Journal of Environmental Impact Assessment
• /
• v.8 no.3
• /
• pp.1-11
• /
• 1999

This study was carried out to evaluate urban environmental structure in Taegu metropolitan region(TMR) with factor analysis, fuzzy set theory, geostatistic and geographic information system(GIS). The factor analysis could choose the representative one out of multiple variables and simplify the evaluation of the urban environmental structure. The fuzzy approach is an attempt to model an aspect of human thinking previously neglected; it starts from the premise that humans don't represent classes of objects as fully disjoint but rather as sets where transitions from membership to non-membership is gradual. The Geographic Information System(GIS) could connect attributes of factor scores derived from factor analysis to digital map by a method so called 'Spatial join'. The results obtained were as follows: Urbanization appearance was concentrated in the large cities, and this appearance was partial extremely, therefore, there has been a structural gap between urban area and agricultural area which was unified into the urban area. All inclinations didn't become worse after sudden urbanization. For example, suburban agriculture was developed as a large scale in the region near the large cities. Then it encouraged farmers in changing their old cultivating methods to the latest ones. But many districts in urban fringe had symptom of urbanization, the districts which were located between large cities have been developed gradually because of urban sprawl, and played a role in connecting each city. Therefore, due to the urbanization, forestry area and agricultural land, well conserved in the agricultural town, could be easily destroyed. In a different way with the urbanization of the Seoul metropolitan region, that of TMR was centralized upon the center of each city, and it was also very partial. But, because so many regions have the potentiality of urbanization, hereafter, the urbanization process in each region is likely to be different multifariously according to the urban management methods.

• Journal of the Korean Regional Science Association
• /
• v.15 no.2
• /
• pp.21-38
• /
• 1999

This paper is concerned with analyzing the role of Northeast Asia intercity networks in Northeast Asia in creating regional networks. For the purpose of this paper, we have followed Choe's (1996) definition of Northeast Asia which includes the Russian Fat East, the Northeast region of China, South Korea, North Korea and Japan. The central hypothesis of the paper is that the geopolitical conditions of Northeast Asia compared for example with Southeast Asia, favor bilateral rather than multilateral linkages between nation states. In these circumstances, it is our hypothesis that cities will play an important role in developing a "local image" of regio-nalism and intercity networks. In order to analyze this hypothesis, the paper is divided into three parts. Part A analyzes the emerging urban system of the Northeast Asia region using Choe's concept of the BESETO corridor and updating his data from the late 1980s to the mid 1990s just prior to the financial crisis. This analysis is further supported by the analysis of economic and transportation linkages within the urban system of the region with some discussion of emerging urban nodes. Part B looks at the specific case studies of the region including the Bohai Sea region, the Japan Sea and case studies of Sapporo, the Japan Sea and case studies of Sapporo, Pusan and Shandong province cities. Part C summarizes this preceding analysis and that the development of regionalism and servicing urban nodes is move likely to emerge from a myriad of linkages developed between the region's cities than from a supra-regional role of nation states. This finding has important implications for regional policy formation suggesting that there should be considerate national support for international linkages between cities.en cities.

• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.93-105
• /
• 2015

The purpose of this study is to outline the strategic implications of a structure analysis and trends of transferred air cargoes for the main airports of the North Asian region for 13 years from 2000 to 2012. To do so, it analyses the concentration levels using a Gini coefficient and Hirschmann Herfindahl index and represents the competitive positioning with regard to the main East Asian airports using the BCG framework and shift-share analysis. Currently, the concentration level is getting weaker in response to the emergence of Chinese airports in the north-east region. It is likely that the steady growth of air cargo of Shanghai airport (PVG) has caused the increase in concentration levels in the region. Seoul airport (ICN) may be directly in competition with PVG for air cargo in the region, giving consideration to reducing or maintaining an average increase ratio of air cargoes of ICN, NRT (Tokyo), and KIX (Osaka) for same period. In the same sense, the average increase in ratio for ICN for same period yields 1.3%, which is far behind the 6.2% and 5.2% of the north-east region and PVG respectively. Additionally, shift-share effect analysis indicates that ICN lost 422,180 tons in the north-east region during the same period, suggesting that transferred cargoes might have been forwarded to PVG.