• Journal of Forest and Environmental Science
• /
• 제39권4호
• /
• pp.213-224
• /
• 2023

As abnormal weather events due to climate change continue to rise, landslide damage is also increasing. Given the substantial time and financial resources required for post-landslide recovery, it becomes imperative to formulate a proactive response plan. In this regard, landslide susceptibility analysis has emerged as a valuable tool for establishing preemptive measures against landslides. Accordingly, this study conducted an annual landslide susceptibility analysis using the history of landslides that occurred over many years in the Jeolla region, and analyzed areas with a high potential for landslides in the Jeolla region. The analysis employed an ensemble model that amalgamated 10 data-based models, aiming to mitigate uncertainties associated with a single-model approach. Furthermore, based on the cumulative data regarding landslide susceptible areas, this research identified regions vulnerable to recurring landslide damage in Jeolla region and proposed specific strategies for utilizing this information at various levels, including local government initiatives, adaptation plan development, and development approval processes. In particular, this study outlined approaches for local government utilization, the determination of adaptation plan types, and considerations for development permits. It is anticipated that this research will serve as a valuable opportunity to underscore the significance of information concerning regions vulnerable to recurring landslide damage.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.18-25
• /
• 2005

This study performed finite element analysis on the pipe bend with various bend angles under loading conditions of internal pressure and combined pressure and bending, to investigate the effect of bend angle on the collapse behavior of pipe bend and on the stress state in the bend region. In the analysis, the pipe bends with bend angle of $5\~90^{\circ}$ were considered, and the bending moment was applied as in-plane closing and opening modes. From the results of analysis, it was found that the collapse moment of pipe bend increases with decreasing bend angle. As the bend angle decreases, also, the equivalent stress at intrados region increases regardless of bending mode. Under closing mode bending especially, the increase in stress at intrados is significant so that the maximum stress region moves from crown to intrados with decreasing bend angle.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.327-330
• /
• 2003

The objectives of this study are to develope the automatic design programs to offer the data when constructing a small scale vinyl-house by region. This program consists of four subroutines. The first is an automatic greenhouse modeling program, the second is a calculating design load program by region, the third is a structural analysis program and the last is a optimum shape design program. The structural analysis can be conducted by simple date input and considering the design load of the install regions into account. The shape of input data is very simple, and the program reflects the design load by region. The output data can be obtained from the automatical calculation processing after structural analysis. The program was verified by compared with outputs of a common use structural analysis program and the results are the same. It was concluded that the developed program could be used efficiently in optimum design of small scale vinyl house.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.5-10
• /
• 2015

Femtosecond laser machining has been applied for creating a sensor function in silica glass optical fibers. Femtosecond laser pulses make it possible to fabricate micro structures in processed regions of a very thin glass fiber line because femtosecond laser pulses can extremely minimize thermal effects. With the laser machining to optical fiber using a single shot of 210-fs laser at a wavelength of 800 nm, it was observed that a processed region surrounded a thin layer which seemed to be a hollow cavity monitored by scanning electron microscopy (SEM). This study aims at a theoretical investigation for the processed region by using a numerical analysis in order to embed sensing function to optical fibers. Numerical methods based finite element method (FEM) has been used for an optical waveguide modeling. This report suggests two types modeling and describes a comparative study on optical losses obtained by the experiment and the numerical analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.888-892
• /
• 2003

This study was tested for the bending stress analysis of Experimental stress analysis on various ankle foot orthoses(AFOs) was fulfilled. Stress was measured by Strain gages which were attached on 8 region in AFOs Results revealed that the peak compressive/tensile stress in the orthoses occured in the lateral region of neck. The Stress Analysis system was made by the electronic oscilloscope, strain gage sensors, amplifier, A/D converter, PC with C program It will be able to using the important data in splint design. Selected AFOs were some different materials but all have same shape except one type(orthosis with joint). C program Is used for managing data. Thus lateral side of the neck region is failed easily.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권1호
• /
• pp.129-135
• /
• 1998

The characteristic of load-distribution is investigated by using nonlinear analysis with a field loading test of existing bridge In this study, nonlinear load-distribution technique for quantitative analysis was adopted. The results were compared with linear solution technique with data from failure test at existing RCT-girder bridge and examine the adequacy of the failure mode. The results of this study showed that the linear solution technique and the proposed nonlinear solution technique agreed well in linear region but did not matched well in nonlinear region because of load-redistribution, and that the effect of load-redistribution was considered to analysis of nonlinear region by linear solution.

• 생명과학회지
• /
• 제26권11호
• /
• pp.1341-1344
• /
• 2016

보길도에서 자라고 있는 황칠나무(Dendropanax morbifera)를 구입하여, 캘러스로 유도한 후, ribosomal DNA(nrDNA)의 internal transcribed spacer (ITS) region의 염기서열을 결정하였다 보길도의 황칠나무(Dendropanax morbifera)의 ITS region의 염기서열을 분석한 결과, 총 689염기를 결정하였다. 결정된 689염기 중에서 ITS1은 222 개염기, 5.8S rDNA는 160염기, ITS2는 233염기인 것으로 판명되었다. GenBank의 BLAST 프로그램(http://www.ncbi.nlm.nih.BLAST)을 사용하여 GenBank/EMBL/DDBJ에 등록되어 있는 Dendropanax 속 33의 염기서열을 수집한 후 multiple alignment를 수행한 결과, 유사도는 99.7%(D. chevalieri)에서 92.6%(Dendropanax arboreus)로 나타났으며, 일본황칠나무(D. trifidus)와는 유사도가 99.4%로 판명되었다.

• 수산경영론집
• /
• 제46권1호
• /
• pp.1-13
• /
• 2015

This study is aimed comparative analysis for business performance of land-based ezo abalone (Haliotis discus hannai) seed farms by standardizing cost structures by region and farming size. The result of survey on average farming incomes by region showed that farming incomes in Haenam and Jindo regions were much higher than those in other regions. Followed by Wando region, incomes in other regions were analyzed to be relatively lower. It is shown that farming incomes became higher as farm size increased. Farming incomes per unit size which were modified from farming incomes by region were highest in Jindo region, followed by East sea region, Wando and Haenam regions. Incomes in Jeju and Yeosu regions were analyzed to be relatively lower. Results on farming incomes per unit size ($m^2$) showed that both farming incomes and profits became higher as size increased. It implies that a scale effectiveness might exist in case of land-based abalone culture system. Impacts of major factors on farming profits and returns on investment in abalone seed aquaculture are summarized as follow. First, only if the survival rate increased by 10% with improvement of component ratio, variable effects became largest. In variable effects of other factors, a variation in Jindo region was largest and on the other hand, a variation in Yeosu region was shown to be smallest.

• 보건행정학회지
• /
• 제32권2호
• /
• pp.205-215
• /
• 2022

Background: The purpose of this study is to identify the factors infecting the medical care utilization from a new perspective by newly classifying the categories of administrative districts using the urban decline index and medical vulnerability index as indicators. Methods: This study targeted 150,940 people who used medical services using the 2015 cohort database (DB), 2010-2015 urban regeneration analysis index DB, and 2014-2015 public health and medical statistics DB. The decline of the region was classified using the urban decline index typed using k-means clustering and the medical vulnerability index typed using the quantile score calculation. Regression analysis was performed 3 times with medical expenditure, length of stay, and the number of outpatient visits as dependent variables. Results: There were 37 stable region (47.4%), 29 health vulnerable region (37.2%), and 12 decline region (15.4%). The health vulnerable region had lower medical expenditure, fewer outpatient visits, and a higher length of stay than the stable region. The decline region was all higher than the stable region but had no significant effect. Conclusion: The factors that cause the health disparity between regions are not only factors related to individual health behavior but also environmental factors of the local community. Therefore, there is a need for a systematic alternative that properly considers the resources within the community and reflects the characteristics of the population.

• 한국멀티미디어학회논문지
• /
• 제13권7호
• /
• pp.1044-1050
• /
• 2010

내시경 초음파는 초음파 진동자를 내시경 끝에 부착하여 그 주위의 장기를 관찰할 목적으로 개발된 의료기기이다. 내시경 초음파 검사는 점막하 종양을 직접 관찰 할 수 있어 종양의 병리 소견이 예측 가능하지만, 종양의 악성화 여부 등에 대해 주관적인 소견이 개입될 수 있는 문제점이 있다. 따라서 본 논문에서는 주관적인 소견으로 인해 나타나는 문제점을 객관화하여 질병의 정확도와 재현성을 높이기 위해 종양의 각 특징을 분석하는 방법을 제안한다. 제안된 방법을 적용하기 위해서 내시경 초음파 검사로 얻어진 초기 영상에서 분석에 필요한 초음파 영역을 추출한다. 초음파 영역은 여러 요인으로 인하여 명암도 값의 차이가 발생하는데, 이는 객관적인 분석에는 비효율적이다. 따라서 초기 검사 시에 매질로써 주입되는 물 영역의 명암도를 기준으로 하여 초음파 영역의 명암도를 표준화 한다. 표준화된 초음파 영역에서 전문의에 의하여 선택된 종양 영역에 LVQ 알고리즘과 비트 평면 분할 방법을 각각 적용하여 에코가 높은 spot 영역과 칼슘이 침착된 영역을 추출하고 분석한다. 종양 영역의 세밀한 분석을 위하여 명암도 값과, 종양 영역 내에서 전문의가 임의로 선택한 두 지점의 거리에 포함된 명암도 정보를 추출한다. 또한 선택된 종양의 악성도를 구분하기 위하여 종양 영역에서 외곽의 기울기를 계산한다. 내시경 초음파 영상에서 각 질병의 특징을 분석한 결과, 제시된 방법이 종양이 가지는 특징을 분석하는데 도움이 되는 것을 확인할 수 있었다.