• Journal of the Mineralogical Society of Korea
• /
• v.14 no.2
• /
• pp.99-110
• /
• 2001

A gem-quality yttria-stabilized zirconium oxide crystals were synthesized by the skull-melting method, using the RF electrical apparatus. Principal raw materials used were $ZrO_2$and 25 wt.% $Y_2O_3$as stabilizer and 0.03~0.05 wt.% $Nd_2O_3$decolorizing agent were added to it. The single crystals were approximately 20$\times$63 mm in size with chemical composition $Zr_{0.73}$ $Y_{0.27}$ $O_{1.87}$ . The crystals are isotropic with no appreciable anisotropism under a polarizing microscope. Their refractive indices are in the range of 2.15~2.18, specific gravity 5.85, Mohs' hardness 8~8.5, and reflectivity 13.47%. The zirconia crystals were confirmed to have cubic structure with Face-centered lattice(Z=4), space group Fm3m ($CaF_2$-type structure) and unit cell parameters are a=5.157 $\AA$. The optimal growing conditions for yttria-stabilized zirconia are 50 kW, 2.94 MHz in power and to use a crucible with 105 mm $\times$ 135 mm in size. When the lowering speed of the crucible was set 16mm/hr gave the best yield, 42%. Since the refractive index(2.15~2.18) of cubic zirconia is smaller than that of diamond, the angle between crown and pavilion should be fashioned to make it smaller than $40.5^{\circ}$ to show the maximum brilliancy and fire.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.223-228
• /
• 2019

This study analyzes the propagation of the path losses between Jeju-do and Jin-do transceivers located in the coastal areas of Korea using the Advanced Refractive Prediction System(AREPS) simulation software based on the actual coastal weather database. The simulated data is used to construct a duct map according to the altitude and thickness of the trap. The duct map is then divided into several regions depending on the altitude parameters of Tx and Rx, which can be used to effectively estimate the abnormal wave propagation characteristics due to duct occurrence in the Jeju-do coastal area. To validate the proposed duct map, two representative atmospheric index samples of the weather database in May 2018 are selected, and the simulated path losses using these atmospheric indices are compared with the measured data. The simulated path losses for abnormal conditions at the Rx point at Jeju-do are 167.7 dB and 192.3 dB, respectively, which are in good agreement with the measured data of 164.4 dB and 194.9 dB, respectively.

• Korean Journal of Food Science and Technology
• /
• v.11 no.2
• /
• pp.86-92
• /
• 1979

Antioxidants. BHA, BHT and PG were added to a commercial soybean oil at a level of 200 ppm, and the antioxidant-treated oils and a control oil were subjected to 30 min. heating at $150{\pm}2^{\circ}C$ and 23.5 hr. cooling at room temperature for 6 times. Variations of % antioxidant retention and some physical and chemical properties of the oils were investigated. The results of the present study were as follows. 1. The % retention of BHA, BHT and PG after the second heating and cooling was respectively 60.5, 55.7 and 40.5 %. That of BHA, BHT and PG after the 6th heating and cooling was respectively 5.7, 3.0 and 1.8 %. 2. The refractive indices and viscosity of the oils, including the control, increased slowly at first. but after 4th heating and cooling, these values increased rapidly. The color indices of the oils, including the control, increased very rapidly, but after the 2nd heating and cooling, the rates of the increase diminished considerably. 3. The efficiency of each antioxidant in suppressing peroxide, thiobarbituric acid, and acid value development decreased rapidly as the antioxidant contents of the oils decreased. After the 6th heating and cooling, the peroxide. thiobarbituric acid and acid values of the oils treated initially with the antioxidants did not differ appreciably from those of the control.

• Journal of the Optical Society of Korea
• /
• v.10 no.3
• /
• pp.124-129
• /
• 2006

We have developed a compact and cost-effective camera module on the basis of wafer-scale-replica processing. A multiple-layered structure of several aspheric lenses in a mobile-phone camera module is first assembled by bonding multiple glass-wafers on which 2-dimensional replica arrays of identical aspheric lenses are UV-embossed, followed by dicing the stacked wafers and packaging them with image sensor chips. This wafer-scale processing leads to at least 95% yield in mass-production, and potentially to a very slim phone with camera-module less than 2 mm in thickness. We have demonstrated a VGA camera module fabricated by the wafer-scale-replica processing with various UV-curable polymers having refractive indices between 1.4 and 1.6, and with three different glass-wafers of which both surfaces are embossed as aspheric lenses having $230{\mu}m$ sag-height and aspheric-coefficients of lens polynomials up to tenth-order. We have found that precise compensation in material shrinkage of the polymer materials is one of the most technical challenges, in orderto achieve a higher resolution in wafer-scaled lenses for mobile-phone camera modules.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.131-131
• /
• 2003

The advent of photonic technologies in the field of communications and data transmission has been heavily increasing the demand in integrated optical (IO) circuits capable of accomplishing not only simple tasks like signal, but also more sophisticated functions like all-optical signal routing or active multiplexing/demultiplexing. In the last decade, sol-gel technology has been widely used to prepare optical materials. Sol-gel processes show many promises for the development of low-loss, high-performance glass integrated optical circuits. However, crack formation is likely to occur during heat treatment in thick gel films. In order to overcome the critical thickness limitation, the organic-modified silicate has been widely used. In this case coating matrices have been prepared from the organo-silanes of T structures, acidic catalyst and the as-prepared gel films have been heat-treated below 200$^{\circ}C$ to avoid the crack formation and the degradation of organic components. However, the films prepared in the acidic condition and the low heat temperature make the films contain high OH groups which is the major optical loss function. In this work, C$\sub$6/H$\sub$5/SiO$\sub$1.5/ films were prepared on silicon substrate by sol-gel method using base catalyst in a PTMS/NH$_4$OH/H$_2$O/C$_2$H$\sub$5/OH system. The sol showed spinable viscosity at 50 wt% of solid content, and neglectable viscosity change with time. The films were crack-free and transparent after curing at 450 $^{\circ}C$, and highly condensed to minimize OH content in C$\sub$6/H$\sub$5/SiO$\sub$1.5/ networks. The effects of heat treatment of the films are characterized on the critical thickness, the chemical composition and the refractive indices by means of SEM, FT-IR, TGA, prism coupler, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.307-311
• /
• 2014

Because of a waveguiding effect and total internal reflection caused by a difference in refractive indices, only 20% of generated light is emitted to the air and the rest is trapped or absorbed in the device. An improvement of outcoupled efficiency of organic light-emitting diodes was studied using a microlens array. Mold of microlens array was fabricated by using photo-lithography with the AZ9260 photoresist, and the microlens array was formed onto the glass substrate using the UV curing agent named ZPU13-440. Device structure consists of microlens/glass/ITO/TPD/$Alq_3$/LiF/Al. It was found that there is an improvement of external quantum efficiency by about 20% at the same current density for the device with the microlens array compared to that of the reference one. Simulated outcoupled efficiency shows the improvement by about 20% for the device with the microlens array compared to that of the reference one. These results are consistent with the experimental ones.

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2003

High quality $Ta_2O_5$ thin films have been obtained from the anodization of deposited tantalum (Ta). The as-deposited amorphous films of 750 $\AA$ thickness have excellent electrical properties. These properties include refractive indices 2.1~2.2 dielectric constants ~25, and leakage currents $10^{-8}$ /A$\textrm{cm}^{-2}$ at 1 MV$\textrm{cm}^{-1}$. We fabricated a MIM element with the $Ta_2O_5$ films. They have perfect current-voltage symmetry characteristics. A high performance MIM device was formed by newly developed processes based on our unique anodization and annealing treatment. The effects of various processing conditions (top-electrode metals, annealing conditions) on the MIM device performances will be extensively discussed throughout this work.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.355-361
• /
• 1999

We have synthesized the soluble polymide based side chain system with covalently attached NLO chromophore Disperse Red 1. The developed polymer is optically transparent in the range of optical communication wave-lengths. Its glass transition temperature$(T_g)$ and thermal decomposition temperature$(T_d)$ are $225^{\circ}C, 310^{\circ}C$ respectively. The poled film with the poling field of $100 V/\mu\textrm{m}$ shows that the dielectric constant is 3.37 at the 10-kHz frequency, the refractive indices of TM and TE modes are both 1.631 at $\lambda = 1300 nm$, and the Electro-optic coefficients are 4.6~9.2 pm/V at $\lambda = 1300 nm$. There are no decays of the EO coefficient in the poled polymer at $180^{\circ}C$ in one hour, and $90^{\circ}C$ in 500 hours.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.73-82
• /
• 1989

We developed a photo-CVD equipment for the deposition of silicon based insulating materials. Silicon dioxide thin films were deposited at various process conditions especially low temperature range $50-250^{\circ}C$. Low pressure mercury lamp was used in the direct excitation of $SiH_4/N_2O$ mixture gas without mercury sensitization. AES and ESCA analysis showed that oxygen to silicon atomic ratio and binding state of Si-O bond was nearly 2.0 and $SiO_2$ type, respectively. The refractive indices were measured to be 1.39-1.44, indicating that films were in relatively low density.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.140-148
• /
• 1995

Optical properties of $TiO_{2}$. Ag filrns and $TiO_{2}/Ag/TiO_{2}$ multilayer filrns with different thickness were predicted using the transfer matrix, and these results were compared with real transmittance curves of the sputterdeposited films. With the complex refractive indices, it was possible to predict transmittance characteristics which were close to real data for $TiO_{2}$ and Ag films. Due to the diffusion and agglomeration of Ag during $TiO_{2}$ deposition, optical properties of the sputterdeposited $TiO_{2}/Ag/TiO_{2}$ films were found to be very different from the transmittance curves predicted using the transfer matrix. Using deposition of 4nm-thick or 6nm-thick TI layers as a diffusion barrier, however, the transmittance curves of $TiO_{2}/Ti/Ag/Ti/TiO_{2}$ five-layer films became similar to ones predicted for $TiO_{2}/Ag/TiO_{2}$ threeiayer films.