• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.132-136
• /
• 2005

It is widely accepted that the reading mechanism of Super-RENS(super-resolution near field structure) and Super-ROM(super-resolution read only memory) is closely related with non-linear temperature dependent material properties such as refractive indices, phase change. Furthermore, the dynamic change of the temperature distribution also an essential part of reading mechanism of Super-RENS/ROM. Therefore, the knowledge of the temperature distribution as a function a time is one of the important keys to reveal the physics of reading mechanism in Super-RENS/ROM. We calculated time-dependent temperature distribution in a 3-dimensional Super-ROM disk structure when moving laser beam is irradiated. With a help of commercial software FEMLAB which employed finite element method, we simulated the temperature distribution of ROM structure whose pit diameter is 120-nm with 50-nm depth. Energy absorption by moving laser irradiation, time variations of heat transfer processes, heat fluxes, heat transfer ratios, and temperature distributions of the complicate 3-dimensional ROM structure have been obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.47-48
• /
• 2000

Parameters of a biaxial compensation film and a liquid crystal cell for the optically compensated bend mode LCD with wide viewing angle were optimized. For practical approach, we calculated the optical refractive indices of a retardation film when thickness of a retardation film was fixed at 50 ${\mu}m$. Furthermore, we also optimized optical parameters of LC cell when parameters of a retardation film were different with designed values, because the biaxial compensation film with exact designed values was very difficult to fabricate. In experiments, we achieved the wide viewing angle of over the ${\pm}$ 60 degrees by using a biaxial compensation film with a practical thickness value.

• 통합자연과학논문집
• /
• 제2권3호
• /
• pp.211-214
• /
• 2009

A new porous silicon (PSi) microcavity sensor for the detection of volatile organic compounds (VOCs) was developed. PSi microcavity sensor exhibiting unique reflectivity was successfully obtained by an electrochemical etching of silicon wafer. When PSi was fabricated into a structure consisting of two high reflectivity muktilayer mirrors separated by an active layer, a microcavity was formed. This PSi microcavity is very sensitive structures. Reflection spectrum of PSi microcavity indicated that the full-width at half-maximum (FWHM) was of 10 nm and much narrower than that of fluorescent organic molecules or quantum dot. The detection of volatile organic compounds (VOCs) using PSi microcavity was achieved. When the vapor of VOCs condensed in the nanopores, the refractive indices of entire particle increased. When PSi microcavity was exposed to acetone, ether, and toluene, PSi microcavity in reflectivity was red shifted by 28 nm, 33 nm, and 20 nm for 2 sec, respectively.

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.33-37
• /
• 2010

The functionalized photonic crystals of porous silicon biosensor was prepared for the application as a label-free biosensor based on distributed Bragg reflector interferometer. Prepared distributed Bragg reflector of porous silicon biosensor displayed sharp reflection in the optical reflective spectra. The mean of construction of molecular architectures on distributed Bragg reflector of porous silicon surfaces was investigated for the step-by-step binding interaction with amines, biotin, avidin, and biotinylated protein A. The subsequent introduction of avidin, and biotinylated protein A resulted in the reflectivity shifted to longer wavelengths, indicative of a change in refractive indices induced by binding of biomolecules.

• 통합자연과학논문집
• /
• 제3권4호
• /
• pp.237-240
• /
• 2010

Recently, number of studies for porous silicon have been investigated by many researchers. Multistructured porous silicon (PSi), distributed Bragg reflector (DBR) PSi, has been a topic of interest, because of its unique optical properties. DBR PSi were prepared by an electrochemical etch of $P^{{+}{+}}$-type silicon wafer of resistivity between 0.1 $m{\Omega}cm$ with square wave current density, resulting two different refractive indices. In this work, We have fabricated a simple and portable organic vapor-sensing device based on DBR porous silicon and investigated the optical characteristics of DBR porous silicon. DBR porous silicon have been characterized by FT-IR, Ocean optics 2000 spectrometer. The device used DBR PSi chip has been demonstrated as an excellent gas sensor, showing a great senstivity to a toxic vapor (TEP, DMMP, DEEP) at room temperature.

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.24-27
• /
• 2010

Multi-functionalized rugate porous silicon (PSi) for biosensor was developed by hydrosilylation with silole and its further reaction with biotin groups. PSi was generated by an electrochemical etching of silicon wafer in aqueous ethanolic HF solution PSi prepared by using etching conditions showed that many sharp spectral lines can be obtained in the optical reflectivity spectrum. 1,1-hydrovinyl-2,3,4,5-tetraphenylsilole was obtained from the reaction of 1,1-dilithio-2,3,4,5-tetraphenyl-1,3-butadiene with dichlorovinylsilane. Multi-functionalized PSi with silole and biotin groups was characterized by UV-vis absorption spectroscopy, Ocean optics 2000 spectrometer, and fluorescence spectroscopy. Optical characteristics such as reflectivity and photoluminescence (PL) were observed. An increase of the reflection wavelength in the reflectivity spectrum by 20 nm was observed, indicative of a change in refractive indices induced by hydrosilylation of the silole and biotin groups to the rugate PSi. This red-shift was attributed to the replacement of some of the Si-H group of fresh rugate PSi with silole and biotin group.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.686-693
• /
• 2016

The analytical expressions for a partially coherent flat-topped vortex hollow beam propagating in uniaxial crystals orthogonal to the optical axis are derived, and the intensity and coherent vortex properties of partially coherent flat-topped vortex hollow beam propagation in uniaxial crystals orthogonal to the optical axis are analyzed by numerical examples. The influence of beam order parameter N, topological charge M, the coherence length and the ratio of refractive indices $n_e/n_o$ of uniaxial crystals on the normalized intensity distribution and coherent vortex of a partially coherent flat-topped vortex hollow beam propagating in uniaxial crystals are discussed in detail.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권1호
• /
• pp.51-58
• /
• 1996

This report describes thick traveling-wave electrode formation and microwave transmission characteristics of the fabricated electrodes. Effective refractive indices of the microwave in the 5 micron CPW type traveling-wave electrodes is around 2.45 according to the results of time domain S parameter measurements. The bandwidth of the electrodes is about 10 GHz and could be extended to 15 GHz through optimization of the process. The developed process technique that enables plating of micropatterns upto 20 micron can be applied to broadband optical intensity modulators.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.532-539
• /
• 1996

Diamond-like carbon (DLC) films were deposited on silicon substrates by the plasma decomposition of hydrocarbons under various conditions, and studied by the spectroscopic ellipsometry (SE). We used the effective medium approximation with the dispersion model developed by Forouhi and Bloomer to determine simultaneously both the structure and the optical constants of the DLC films from their ellipsometric spectra. Especially, we investigated the variation of the multilayer structure including the interface layer, of the refractive indices, and of the extinction coefficients as the deposition conditions were varied; substrate pretreatment procedure, hydrocarbon precursors, and the substrate bias voltage were varied.

• 센서학회지
• /
• 제15권4호
• /
• pp.297-301
• /
• 2006

We have fabricated a multi-mode nonlinear plastic optical fiber (POF) using organic nonlinear optical materials and demonstrated the propagation of light. The refractive indices of core and cladding are 1.5240 and 1.5172. We made a POF preform by rod-in tube method. The core diameter of the fabricated POF is about $30{\mu}m$. We evaluated the temperature characteristics of POF. The sensitivity is $0.345{\;}mW/^{\circ}C$ and the linearity of sensor was good.